Eastwood Extreme Chassis Black Paint

    Item #11175 Extreme Chassis Black

    Price
    Value
    Quality
    71 Review(s)

    Details

    Extreme Chassis Black has 3X the resins of traditional coatings, so it's tough enough for any undercar component...choose satin or high-gloss.

    You've spent many hours prepping your frame and suspension parts; now top-coat it with a tough, OEM-matching formula that provides extreme durability! 3 times more resins make it 3 times more durable than our original Chassis Black.

    • Improved resistance against corrosion, chips and scratches
    • Resists brake fluid, fuel and solvents
    • Matches OEM finish
    • Apply multiple coats without lifting
    • Choose 14-oz. aerosol (about 8 sq. ft. of coverage) or quart can (up to 40 sq. ft. of coverage)
    • Choose satin (60-70% gloss) or high-gloss (85% gloss) finish

    Customer Review:
    "This is a great product but you really have to use it with the Extreme chassis black primer. Buy both of them if you want a good finish."

    About Eastwood Extreme Chassis Black Paint

    3 times more resins make it 3 times more durable than our original Chassis Black coating. This maximum-durability formula offers improved resistance to brake fluid, fuel, solvent, chips and scratches.

    For improved adhesion on clean, bare metal, first prime with Extreme Chassis Black Primer (aerosol 11193Z; quart can 11194ZP; or gallon can 11195ZP). For rusted metal, first prime with Eastwood Rust Encapsulator. Allow 15-20 minutes between coats of Extreme Chassis Black; can be re-coated at any time without lifting.

    Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.


    Accessories

    10041Z PRE Paint Prep
    51111Z Suspension Detailing Kit
    50457ZP Spray Gray Stainless Epoxy Coating
    50458ZP Detail Gray Stainless Epoxy Coating
    10331Z Golden Cad System
    10426Z Underhood Detailing Kit
    10395Z Factory Gray High-Temp Exhaust Manifold Coating
    10020Z Silver Exhaust System Paint


    Contents

    Choose from the following:
    11175Z is the Extreme Chassis Black, Satin, 14-oz., Aerosol
    11172Z is the Extreme Chassis Black, High-Gloss, 14-oz., Aerosol
    11173ZP is the Extreme Chassis Black, High-Gloss, Quart
    11176ZP is the Extreme Chassis Black, Satin, Quart
    Some are also available as 12-packs.


    Product Instructions

    Click Here for product instructions

    Click here for quart instructions


    Safety

    Always wear eye, skin and respiratory protection when painting. Follow label directions and consult MSDS for specific warnings


    Customers also viewed:

    Customer Reviews

    Items 11 to 20 of 71 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. ...
    7. 8
    WHAT HAPPENED? (Posted on 6/2/13)
    Review by Derek
    Value
    Quality
    Price
    I have bought and used alot of this, however these last few orders of it have me not wanting to use it anymore. First problem I had was wrinkling almost immediately after spraying over the extreme chassis primer, second issue on different parts it is not adhering even after scuffing. Not happy with this product anymore, seems like something has changed since the new cans/labels came out.
    Can leaked (Posted on 5/26/13)
    Review by Robert E.
    Quality
    Price
    Value
    I have bought hundreds of dollars of Eastwood products. This last order chassis extreme spray can LEAKED I was only able to use half the product. Ok the can dropped off my trash can ,but really! Then it starts leaking when I sprayed it next. I have bought 3 dollar spray cans from Home Depot that have been dropped and the didn't leak. Sorry Eastwood but I was terribly disappointed.
    Exellent product (Posted on 5/20/13)
    Review by Ray
    Value
    Quality
    Price
    This is my first time using Eastwood products and I'm very pleased with the results. I wire brushed my frame, wiped down with PRE, applied their Rust Encapsulator with a foam brush then sprayed two coats of Extreme Chassis Black Satin. Very easy to spray, almost impossible to get a run. If I had to do again, I would use same products except I would spray. It looks great.
    EXCELLENT PRODUCT!!! (Posted on 5/8/13)
    Review by Milich
    Price
    Value
    Quality
    I used this product in the past while the engine was removed from my 90 GMC Sierra SLE 1 Ton Dually. I do a mini restoration every time I work on a vehicle. It has a ZZ509 racing crate engine that is tuned port injected. PERFECT SLEEPER for the import tuners to smell some exhaust, :-)
    Great product. (Posted on 5/7/13)
    Review by Bill
    Price
    Value
    Quality
    I do several restorations or underside detailing of cars per year. Chassis black products cover extremely well in one coat. This is the best underside paint I have ever used.
    Nice finish (Posted on 4/28/13)
    Review by Michael
    Price
    Value
    Quality
    Very durable,covers nice, I actually use it under the hood for the fire wall and pulleys, p/s pump etc.
    Extreme chassis black satin (Posted on 4/28/13)
    Review by Michael
    Price
    Value
    Quality
    When parts are prepped correctly this paint looks great and has just the right amount of gloss to it. I'm actually using it in the engine bay because I like the finished look better than the under hood black. (Firewall, p/s pump pulleys etc.)
    not good (Posted on 4/15/13)
    Review by Edward
    Price
    Value
    Quality
    I had a rad support sandblasted and I applied DP epoxy primer to the support. I waited about 2 hrs. prior to applying the Extreme Chassis black paint.It went on nice. That was about 2 weeks ago. I began to assemble the truck, and I went to blow the dust off the support and paint came off . there was no adhesion to the epoxy primer at all. Has anyone had this problem with this material?
    Tough surface goes on with a crinkle finish (Posted on 4/4/13)
    Review by Phil
    Quality
    Price
    Value
    I used this product on an old motorcycle swingarm. I didn't order the primer but this stuff created a slightly rough texture not glass smooth.
    Great Paint (Posted on 3/19/13)
    Review by Doug
    Quality
    Price
    Value
    This is actually the first thing I had ever used from Eastwood, but has not been the last. I'm currently using it to redo a Ford 8.8 rear. Disassembled the whole thing, painted the housing, and even continuously spinning the painted housing on steel jackstands throughout the reassembly process, the only damage was some scratch marks. No chips. No gouges. Really clean. Apply to a clean surface, and allow it to cure properly, and this stuff is as hard as a rock.

    Items 11 to 20 of 71 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. ...
    7. 8

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register