Eastwood Extreme Chassis Black Paint

    Item #11175 Extreme Chassis Black

    Details

    Extreme Chassis Black has 3X the resins of traditional coatings, so it's tough enough for any undercar component...choose satin or high-gloss.

    You've spent many hours prepping your frame and suspension parts; now top-coat it with a tough, OEM-matching formula that provides extreme durability! 3 times more resins make it 3 times more durable than our original Chassis Black.

    • Improved resistance against corrosion, chips and scratches
    • Resists brake fluid, fuel and solvents
    • Matches OEM finish
    • Apply multiple coats without lifting
    • Choose 14-oz. aerosol (about 8 sq. ft. of coverage) or quart can (up to 40 sq. ft. of coverage)
    • Choose satin (60-70% gloss) or high-gloss (85% gloss) finish

    Customer Review:
    "This is a great product but you really have to use it with the Extreme chassis black primer. Buy both of them if you want a good finish."

    About Eastwood Extreme Chassis Black Paint

    3 times more resins make it 3 times more durable than our original Chassis Black coating. This maximum-durability formula offers improved resistance to brake fluid, fuel, solvent, chips and scratches.

    For improved adhesion on clean, bare metal, first prime with Extreme Chassis Black Primer (aerosol 11193Z; quart can 11194ZP; or gallon can 11195ZP). For rusted metal, first prime with Eastwood Rust Encapsulator. Allow 15-20 minutes between coats of Extreme Chassis Black; can be re-coated at any time without lifting.

    Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.


    Accessories

    10041Z PRE Paint Prep
    51111Z Suspension Detailing Kit
    50457ZP Spray Gray Stainless Epoxy Coating
    50458ZP Detail Gray Stainless Epoxy Coating
    10331Z Golden Cad System
    10426Z Underhood Detailing Kit
    10395Z Factory Gray High-Temp Exhaust Manifold Coating
    10020Z Silver Exhaust System Paint


    Contents

    Choose from the following:
    11175Z is the Extreme Chassis Black, Satin, 14-oz., Aerosol
    11172Z is the Extreme Chassis Black, High-Gloss, 14-oz., Aerosol
    11173ZP is the Extreme Chassis Black, High-Gloss, Quart
    11176ZP is the Extreme Chassis Black, Satin, Quart
    Some are also available as 12-packs.


    Product Instructions

    Click Here for product instructions

    Click here for quart instructions


    Safety

    Always wear eye, skin and respiratory protection when painting. Follow label directions and consult MSDS for specific warnings


    Customers also viewed:

    Customer Reviews

    Items 61 to 70 of 79 total

    per page
    1. 1
    2. ...
    3. 4
    4. 5
    5. 6
    6. 7
    7. 8
    Extreme Chassis Gloss Black is great! (Posted on 12/7/2010)
    Review by Smitty
    Price
    Value
    Quality
    I recently rebuilt the 12-Bolt rear end in my 99 Camaro and wanted to finish it with a coating that is durable and looks good. After a lot of research I brushed on POR-15 but was a little dissapointed with the end result. They say it is "self leveling" but I could still see where I had overlapped layers while going around the tubes and there were inconsistencies in the color. I smoothed out the POR-15 and bought two spray cans of the Extreme Chassis Black-High Gloss. Damn this stuff works great!!! Not only is it durable, but it looks like it was sprayed from a real spray gun and cleared after. I definitely recommend using this stuff on any chassis parts if you want a great appearance and don't mind spending the extra $$$ for a better quality paint than what you can get at the hardware store.
    fantastic (Posted on 11/1/2010)
    Review by ban1
    Price
    Value
    Quality
    this stuff is just what i needed. did the whole frame on my 79 trans am with 1 and 1/2 cans "thats 3 coats by the way" the price isn't that bad for what you get. i used there encapsulator primer as a base and this as a top. Ive hit the frame with a hammer "by accident" and nothing, no damage. great stuff will by constantly.
    EXCELLENT PRODUCT (Posted on 10/1/2010)
    Review by RONALD
    Price
    Value
    Quality
    Great product. I used the Gloss Black. Superb finish. Had friends look at frame after it was sprayed and they could not believe I used a spray can. Frame was sandblasted and then primed with Eastwood primer and then top coated with the Extreme Chassis Black. Thanks Eastwood for a great product.
    Extreme Chassis Black and Primer on Triumph Trophy Frame (Posted on 8/22/2010)
    Review by Scott
    Value
    Quality
    Price
    I'm restoring an old motorcycle, and did a lot of research about what kind of paint to use for painting the frame and all of the other parts that would use the same paint. I wanted something that would look good and last for many years. I had read all of the various positive and negative results from people using powder coating, and I also wanted to keep my restoration costs within reason. I ended up choosing Eastwood's Extreme Chassis Black and primer because they were reasonably priced, and supposedly long-lasting and durable.

    I first used Eastwood's Dekote to strip the original paint from the frame and parts, and then used Eastwood's Oxysolve that dissolves the rust and leaves behind a very paintable oxide finish. Both are great products. I believe their newer product is called Rust Dissolver.

    For the primer and paint, I used spray cans because I didn't want to have to deal with the messy nuisance of cleaning a spray gun. After wiping down the frame, I sprayed two light to medium coats of primer, waiting 24 hours between coats. I then sprayed two medium coats of the Extreme Chassis Black Gloss Paint, again waiting 24 hours between each coat. The results are very impressive. Needless to say, I'm glad I did my research. I made sure the first coat of paint went on light to medium, and the second coat medium to heavy, leaving an even wet coat appearance, but being very careful not to lay it on too heavy in fear of running or sagging.

    My only complaint is the spray nozzle. PAM no-stick cooking spray uses a much better spray nozzle design, and I have to wonder why automotive paints don't use this same type.

    I gave this product a 4 for quality only because of the spray nozzle.

    Would I use this product again? You bet!
    Great product (Posted on 7/19/2010)
    Review by Triumph Dave
    Value
    Quality
    Price
    Sprays on easy, tough as nails. A little pricy, but if it last like advertised, well worth it. Wish it came in a 6 pack as 12 cans is a lot and you don't get a volume discount unless you order 12.
    Great stuff (Posted on 6/25/2010)
    Review by James
    Value
    Quality
    Price
    I used this for coating the entire front end of a race car. I used the Rust Encapsulator, followed by the Chassis Black primer and finished with the Satin Extreme Chassis Black. It was the perfect sheen, and has so far been very durable. I've dropped tools directly on it and have yet to see a chip.
    Looks like Powdercoating (Posted on 6/9/2010)
    Review by Birdman
    Value
    Quality
    Price
    I am very pleased with the results (See pictures of befor and after) I used this on the subframe and rear differential. I powerwashed and lightly sanded everything to get it clean and smooth. Everything was dissasembled and the components were individually sprayed and reassembled to ensure all surfaces were treated to prevent rust bleading through later. TIP.. Make sure the metal is not cold when spraying and you will achieve great results.
    Thanks!!
    Next Time Ceramic (Posted on 5/1/2010)
    Review by 557B210
    Price
    Value
    Quality
    In general i was satisfied with the product....Although the chip resistance was not as good as I desired....Will try the 2K Ceramic Chassis Black next time.
    Well Covered (Posted on 4/11/2010)
    Review by GearWolf
    Price
    Value
    Quality
    When your looking for a coating that gives greater protection against the elements, there is not another product out there that endures the elements against degradation, at a quality level as Eastwood Chasis . Black. Eastwood is able to provide three different levels for your budget. This is a keen value. I choose to use the Extreme Black Chasis, instead of the ceramic because I have an older vechile of not much value left, however; I wanted a coating that would be a little more impervious and lasting for the years to come.
    If a vechile is to last 5 years, or more from now, I believe it is worth the investment to coat even the parts you repair and replace, aside from a restoration, ....especially in colder climates where degradtion is a prevelant factor. Any job is worth doing well, Eastwood certaintly has done there homework in experience compared to many other companies out their!

    Easy to use chassis gloss black (Posted on 3/18/2010)
    Review by Paul
    Price
    Value
    Quality
    The extreme chassis gloss black is very easy to use right out of the can no thinning nesesary. I would recommend this product to everyone its great. I am just starting my project and talking with the eastwood company makes it a lot easer. Thank you for the help.

    Items 61 to 70 of 79 total

    per page
    1. 1
    2. ...
    3. 4
    4. 5
    5. 6
    6. 7
    7. 8

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register