- Home
- Eastwood 2K Ceramic Chassis Black Kits
- Product Reviews
Details
Professional Grade at a DIY Price Ceramic durability Chemical resistant Chip & abrasion resistant UV resistant 2K technology, 4:1 ratio 2 Gloss levels
2K Ceramic CB Satin and Activator
Only
$59.99
|
Eastwood Chassis Kleen 18 oz Aerosol
Only
$6.99
|
Eastwood Ceramic Brake Caliper PaintsStarting at: $39.99 |
Eastwood PRE Painting PrepStarting at: $7.99 |
Eastwood Branded Color Paint Chart
Only
$4.99
|
See this product in action!
About Eastwood 2K Ceramic Chassis Black Kits
Now there's a catalyzed urethane form of our popular Chassis Black with a difference. This is our most durable, chemical resistant, and easiest to spray, chassis Black yet! And since it's formulated with ceramic, it offers even better abrasion resistance! Easy 4:1 mix with the 21854Z Activator 8 oz. & spray with a 1.3 or larger nozzle spray gun. Covers about 50 sq. ft. in 2 coats. Withstands peaks up to 300 degrees F. For greatest durability apply over our 50242ZP Epoxy Primer. For professional use only. Contains isocynates. Proper respiratory protection Must Be Used.
Product information sheet - Click HereCan Eastwood Ceramic Chassis Black be applied directly over other finishes? Generally Eastwood Ceramic Chassis Black can be applied over most thoroughly cured (cannot be indented with a thumbnail) finishes. Scuff first with 320 -600 grit and test a small area before coating the entire area. If lifting occurs, remove the lifting paint, sand the surrounding area, and seal the surface by priming first with 50242ZP Epoxy Primer mixed with 50243ZP Epoxy
Primer Catalyst. NOTE: Eastwood Epoxy Primer can be reduced up to 20% with
50104ZP Universal Zero VOC Urethane Reducer Qt. to use strictly as a sealer.
Product information sheet - Click
Here
Always wear appropriate eye, skin and respiratory protection when using this product. Always apply in a well ventilated area, away from open flames
Consult MSDS for specific safety warnings and hazards.
Product information sheet - Click
Customer Reviews
7 Item(s)
per page
-
Looks nice, comes off easy
(Posted on 3/27/13)
Review by Dennis -
The paint applies fine, dries OK, touch it with a hard object and it comes right off. I expected a 2 part paint to be more scuff resistant than spraypaint.Quality Price Value -
easy to use
(Posted on 6/20/12)
Review by rcmatt007 -
stirred and mixed what I needed and then reduced it 10% and it sprayed on nice and smooth. Did a rear motorcycle swing arm and a couple of wheels. Looking forward to seeing how durable it isPrice Value Quality -
Good Product
(Posted on 4/4/12)
Review by Travis -
Painted my Model A frame with this product. It sprayed very nicely with no reducer added and turned out great. Happy with the product but not with the packaging. The cans had big dents in them making it very hard to mix the paint. The ceramic paint settles in the bottom of the can so it was quite a pain.Quality Price Value -
Tough but not against the Sun.....
(Posted on 9/29/11)
Review by James -
I applied this on a number of parts for my Jeep project last summer (2010) including bumpers, etc....over epoxy primer. Applied ok but beware, it does set up quickly in the pot so don't dilly dally around with it. Initially, it looked great and so far, it's toughness seems to be pretty good. However, I will not use it again as it oxidizes and chalks up very badly. After one year, you wouldn't even notice my bumpers were painted as recently as they were. Very disappointed in it's durability with regards to dealing with UV.Value Quality Price -
excellent product
(Posted on 5/12/11)
Review by EdP -
I finally got around to painting my pan (vw) and have to say that I'm impressed with the product. After a ccrew up on my part, I had it spraying as it should. You will want to use reducer since it is pretty heavy. It does dry very quickly as mentioned before and man does it look awsome!! I used the satin finish and am very pleased. Ps.. does it ever stink so use a good mask for ment for spaying iso's and also ventilate.Value Quality Price -
Goes on nice
(Posted on 1/21/10)
Review by PatG -
Great product. I'm a rookie painter using a Starting Line spray gun. It sprayed very nice and hardened quickly. Tried both gloss and satin and both were great. Note that this product settles hard in bottom of paint can. Shaking for 10 minutes won't dislodge sludge. You need to dig into the ceramic solids with a paint stick and stir for up to 15 minutes to get all solids into solution. They even settle in the gun cup after 40 minutes of not spraying. Also, this stuff has isocynates so you need supplied air or fantastic ventilation. It really smells. My wife complains loudly when I spray it. But it drys/cures very nicely and was easy to spray, even for a neophyte like me.Price Value Quality -
Subframe and Control Arms.
(Posted on 10/16/09)
Review by Fast Eddy McGee -
I used Eastwoods 2K Ceramic Chassis Black, Satin on my 69 Camaro subframe and control arms and I am here to tell every one that my frame turned out with a Show quality finish. I am sure that when I am finished with the rotisserie restoration that I am doing on my 69 Camaro,The Paints that I am using from Eastwood will help me to acheve the 1st place results at car shows that I am shooting for. Thanks Eastwood. Keep up the good work.Price Value Quality
Eddy Akron, OH.
7 Item(s)
per page
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|