Elite HotCoat Powder Coating Kit

    Item #12859

    Details

    "Elite" HotCoat Powder-Coating Kit is our most complete powder coat kit with our original powder coat gun! Now the home hobbyist can take advantage of all the benefits of powder coating right in his own garage or shop! This "Elite" kit includes our original powder coat gun, black plus 4 standard colors of your choice, plus everything else you'll need (except compressed air and a dedicated oven) to achieve truly professional results.
    • Extremely durable finish
    • Coat and cure in under an hour!
    • Easy to apply
    • Quick color changes
    • Economical

    About Elite HotCoat Powder Coating Kit

    Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

    One 8-oz. bottle of powder covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents. HotCoat Powder Coating System requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).

    (See "Contents" tab for all the specific items included in this Elite kit.)


    Contents

    10198 Original Eastwood HotCoat Gun
    1/2-lb. Black Gloss Powder
    Your choice of 4 standard 1/2-lb. Powder Colors
    51558 Powder Chip Color Chart
    10078 Reusable Hi-Temp Silicone Plugs
    10027 Hi-Temp Masking Tape (1/2" x 36-yard roll)
    43045 1-lb. Stainless Steel Hanging Wire
    34066 In-Line Air Filter
    3 Empty Powder Bottles with Screw-On Tops
    Beginning Powder Coater's Handbook


    Specs

    Accessories

    10041Z PRE Painting Prep
    51081 Metal Wash Metal Prep
    19418ZP Fast Etch Rust Remover and Metal Prep
    20473 2-Stage Air Dryer System
    58111 Pack of 20 Hooks
    58112 Silicone Cap & Plug Kit
    11477 Infrared Thermometer
    10590 Infrared Curing Lamp


    FAQs

    (Q) Can I use my household oven?
    (A) No, you cannot use an oven that will be used to cook/bake food.

    (Q) How long do I bake/cure the part?
    (A) 20 minutes at 400 degreesF.

    (Q) Can I remove the powder coating?
    (A) Yes, use Eastwood's 12849 Powder Coat & Paint Dissolver (Qt.) or 12850 Powder Coat & Paint Dissolver (Gal.).

    (Q) How do I know what the colors will look like?
    (A) Order Eastwood's 51558 HotCoat Powder Coating Chip Chart (free in our kits).


    Safety

    Use a disposable dust mask when handling or applying powder. Powder, like common flour, can be explosive when suspended in the air in high concentrations. To minimize any explosion risk, sweep up—do not vacuum—powder from the floor. Cure powder in a well-ventilated area. The urethane powders we sell liberate a very minute amount of isocyanates when the powder flows out. This usually occurs about 3-5 minutes after the part is placed in the oven to bake. Wear a respirator with fresh filter cartridges when curing or inspecting flow-out progress.


    Warranty

    1-year mfr's. warranty against defects.

    Designed, engineered and tested to Eastwood's specifications.

    Final product imported.


    Instructions

    Click here for product instructions


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 17 total

    per page
    1. 1
    2. 2
    Good Product (Posted on 6/6/2014)
    Review by Wayne
    Price
    Value
    Quality
    I bought the Elite Hot Coat Powder Coating Kit #12859. It was shown in video. Now on the color chart there is a dual voltage gun. For $60 more I could have bought this kit. For a beginner I am disappointed I got this one. I just didn’t want to send my kit back and reorder. (Shipping$$) Over all I am very satisfied with the gun. Now the book not so good. I have to learn from trial.
    so far so good (Posted on 10/9/2011)
    Review by hannibal
    Price
    Value
    Quality
    I bought this to do small cases and after a brief learning curve, am really happy with the product. I had two minor problems with the system when I got it. First the diffuser that is standard with the gun would not fit. The hole that the electrode should fit through was too small. Second the alligator clip that you attach to the part was bent. Clip simply needed to be bent back with some pliers and since I got the elite kit I used the other diffuser that came with the kit. Too bad the ovens are so expensive. I am using an inexpensive toaster oven and it does the job.
    Nice bang for your buck (Posted on 10/3/2011)
    Review by vtxkev44
    Value
    Quality
    Price
    Everything you get for the price is great. The only thing that I don't like is that it's a one coat gun. It dont push enough KV's
    exceeded my expectations (Posted on 4/29/2011)
    Review by zonkman
    Value
    Quality
    Price
    It's a good setup to get you srarted in powder coating. If you follow the directions that come with the set you will get a good durable finish that you can be proud of. I can't wait to work on my next project.
    excellent (Posted on 10/23/2010)
    Review by Daniel
    Price
    Value
    Quality
    I bought this simply for the fact of how much it cost to get something powdercoated,it was a great investment.
    It is an excellent kit to get into powdercoating, easy to use and I have expanded my supplies to do more.
    The only disadvantage is not of the kit but of an oven, for while a household oven does the job you are very limited to the size of what you can realistically can do.
    GREAT PRODUCT (Posted on 10/13/2010)
    Review by BOREDINHAWAII
    Price
    Value
    Quality
    Ok, first follow the instructions. This was my first experience for powder coating, and once I followed ALL of the instructions it came out perfect with repeatable results because it creates a process. Fantastic product.
    Excellent product, easy to use (Posted on 4/16/2010)
    Review by PatG
    Price
    Value
    Quality
    I bought this kit and have used it for six months. After blasting, I have powdercoated most of my front suspension parts, including coil springs. They came out beautifully. Best to preheat the items at 400 degrees for at least 5 minutes before coating. The powders are reasonably priced and flow out beautifully. And it won't chip with a hammer strike. It made 50 year old suspension parts look like new! All parts powdercoated in this photo of my 1959 Triumph Suspension.
    Excelent product (Posted on 3/29/2010)
    Review by Joe
    Price
    Value
    Quality
    The hot coat powder coating kit is very easy to use producing excelent results out of the box. I had never used a powder coating system before and the first time I used it the results were near perfect.
    Not bad for a durable coating.. (Posted on 1/28/2010)
    Review by drdewpep
    Price
    Value
    Quality
    Product works well, easy to use with no training. Time will tell how well the system last. have coated 5 or 6 pieces,happy with the results from my efford. I think with time Ithe finished product to look as good or better than a other work . I would just like to thank eastwood for offering such products for the hobbiest, these types of products over time will save me a ton of money, and I can say that "I did that part myself!!!"
    Great Product (Posted on 1/26/2010)
    Review by Brian
    Price
    Value
    Quality
    Everything you need to get into powder coating except the oven. We started out with a toaster oven and moved up to a 2 ft powder coat oven after getting excellent results.

    Items 1 to 10 of 17 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register