2K AeroSpray™ High Build Urethane Primer Gray

    Item #14794Z Brand: Eastwood

    Quality
    Price
    Value
    2 Review(s)

    Details

    Eastwood's 2K AeroSpray™ High Build Urethane Primer Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood's proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols, and no mess to clean up. You'll achieve professional results from an easy-to-use aerosol.

    About 2K AeroSpray™ High Build Urethane Primer Gray

    Eastwood's 2K AeroSpray High Build Urethane Primer Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood's proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols, and no mess to clean up. You'll achieve professional results from an easy-to-use aerosol.

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Contents

    11.8 ounces net weight


    Accessories

    10041Z PRE Painting Prep. 12196Z Chassis Kleen, 14149Z 2K Epoxy Primer. 16060Z Rust Encapsulator. 51483Z Rust Converter. 12846Z Aerosol Injected Cleaner.11456 Respirator


    Product Info Sheets

    Click Here for product info sheets



    Safety

    Always wear eye, skin and respiratory protection when using this product.Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings


    Warranty

    Made in Germany


    Application

    Before activating, shake aerosol vigorously for 1 min. Take red button from cap. Rotate aerosol 180 degrees and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life 48 hours at 68 degreesF.


    Customers also viewed:

    Customer Reviews

    2 Item(s)

    per page
    Worst I've seen! (Posted on 1/28/14)
    Review by Dwight
    Price
    Value
    Quality
    I don't know if I was the lucky guy that got the bad can or what but I had a very bad experience with this product! After activating the contents I attempted to use it as directed. What came out was a cross between a spray and a squirt... The primer just dribbled down the side of the can and made a huge mess! It didn't last 2 or 3 minutes before it was empty. You're rolling the dice if you buy this product. You might get a good can but you could also get lucky and get one like mine!
    Worth while product (Posted on 11/5/13)
    Review by MARK
    Quality
    Price
    Value
    I bought the paint for touch up after wet sanding the primer on my car. I didn't want to set up my sprayer just for a few spots. Yes it is a pain shaking the can for 4 minutes. But, the paint is just as good as Eastwoods primer you must spray. Very strong. I still have a spot on my finger nail from when I sprayed over 2 weeks ago. HAha. The can did spit once or twice, but I needed to wet sand afterwards so no big deal. Overall it's worth the money if you only need to paint a small area.

    2 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register