Eastwood Contour Glazing Putty

    Item #glazing 13521

    Price
    Value
    Quality
    6 Review(s)

    Details

    Fill pinholes and sand scratches with our Polyester Glazing Putty...even on large areas

    Before painting, use this glazing putty to fill pinholes and sand other minor imperfections that can ruin the look of your final finish. Use over sanded substrates, steel and galvanized steel.
    • Fills pinholes
    • Sands scratches and imperfections
    • Can be applied to large areas without distortion
    • Mix with other body fillers

    About Eastwood Contour Glazing Putty

    Easily spreads very thin and can be sanded to an ultra-thin feather edge. Mix with body fillers to improve their spreading and sanding ability. Unlike other putties, our glazing putty can be spread over larger areas and fill without distorting contours. May be top-coated with epoxy or urethane primer. Includes 2-oz. cream hardener.

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Accessories

    13919 Eastwood Filler Spreaders
    31273 Eastwood Filler Mixing Board
    10041Z PRE Painting Prep
    31160 Dura-Block Sanding Blocks
    21538 Larry Lyles "Basic Body Repair" DVD
    43579 Dual-Action Random-Orbit Sander
    43120 Eastwood Fender Stand


    Application

    Thoroughly mix desired amount of material with cream hardener. Using a clean spreader, fill to desired level. Do not exceed 1/16" depth. Allow to cure for at least 15 minutes before sanding. Abrade with 80-grit and follow up with 120-180-grit to achieve desired contour. Final finish with finer abrasives. Topcoat with quality primer, such as Eastwood’s Epoxy or Urethane Primers.

    CAUTION: Do NOT return catalyzed material back into can. To avoid contamination, seal lid tightly after each use. Store in a cool dry place.


    Safety

    Always wear eye, skin and respiratory protection when using this product. Always apply in a well-ventilated area. Consult MSDS and product label for specific safety warnings.


    Customers also viewed:

    Customer Reviews

    6 Item(s)

    per page
    Filler that fills a need. (Posted on 3/31/14)
    Review by Jim S
    Quality
    Price
    Value
    I gave it 5 stars, the only slight issue is as mentioned before is it does tend to clog the paper at first sanding. I found by using 100 grit dry paper to knock off the top layer. After that it mixes, spreads, adheres, fills, and sands great. One quality that stand out for me is I use Feather Fill high build primer, the Contour glazing putty sands at the same rate, meaning I can block sand across both products and get equal leveling. Now as I recoat with the Feather Fill, the leveling is done, I don't waste time leveling between the primer and putty, I'm blocking the panel for overall straightness.
    takes for ever!!!!! (Posted on 3/18/14)
    Review by John
    Quality
    Price
    Value
    this product is only good for mixing with other body fillers if your looking for something to fill pin holes or even glaze anything alone this product takesssss foooorrrrevvverrrrrrrr tooooooo dryyyyyyyyyyyyy!!!!!! plus sands likee garabage!!! i recomende ever coat glaze all day
    Smooth (Posted on 2/1/14)
    Review by Al
    Value
    Quality
    Price
    If you mike it right it is silky smooth with less sanding. Could use a larger tube of hardner.
    glazing (Posted on 12/3/13)
    Review by James
    Quality
    Price
    Value
    seems to be a good product, certainly better than the red toothpaste stuff sold at Auto Zone, etc and sold in a smaller size than the professional stuff at the auto paint store.
    Good pruduct (Posted on 3/27/13)
    Review by OMG
    Price
    Value
    Quality
    I would recommend this product. I agree that the sanding does clog the first piece of paper but then sands right out with a fresh peice. I would say don’t be shy with the hardner on this one. I found less hardner contributes to the sanding issues. What I can say is that the shelf life on this product surpasses other products on the market. I’ve used other products that gel in the tube after it has been opened or right off the shelf from the local body suppliers. At that point it useless. I’ve use 4 tubes of this product so far and it has held up well no gelling at and been able to utilize the entire tube each time. Personally I think this is a good product and I’m about to order some right now!
    Plugs Paper/Hard to sand (Posted on 1/1/13)
    Review by DonC
    Quality
    Price
    Value
    I have used other glazing putties and have never had a problem with the paper getting plugged and they have sanded easily. The product quickly plugs up the paper and is quite difficult to sand. I would not recommend this product if you're looking for an easy sand glazing product.

    6 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register

    <div class="f-left"><iframe width="250" height="200" src="http://www.youtube.com/embed/b0ebUnmHLDg" frameborder="0" allowfullscreen></iframe></div><iframe width="250" height="200" src="http://www.youtube.com/embed/vs4jt6M79W0" frameborder="0" allowfullscreen></iframe>