Rust Encapsulator Gray 15 ounce Aerosol

    Item #14822Z Brand: Eastwood

    Quality
    Price
    Value
    4 Review(s)

    Details

    Stop rust in its tracks! Our Rust Encapsulator (Gray) has been reformulated with TWICE the corrosion resistance!

    You thought it was good before...wait ’til you try this Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.

    • Gray
    • Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber)
    • Epoxy-fortified for better adhesion and topcoat compatibility
    • Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
    • Cures faster, and the low-VOC formula is acceptable in California
    • 15-oz. aerosol covers about 10 sq. ft.
    • As seen on "My Classic Car" TV show


    • Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

    About Rust Encapsulator Gray 15 ounce Aerosol

    Unlike off the shelf under coatings, Rubberized Rust Encapsulator can be applied directly over rust and without the bubbling that creates air pockets thus trapping rust. Since its engineered with high tech flex agents, its pliable finish protects surfaces from abrasions, road hazards and deadens sound. So durable it exceeded 1,000 hours of salt spray chamber testing, this surpasses the standards for a 2 component catalyzed coating! Simply apply directly over rust or bare metal; no need to topcoat. Remains flexible and durable. Satin black finish.


    Contents

    Net Weight 15 ounces


    Accessories

    10041Z PRE Painting Prep, 13651Z Rubberized Rust Encapsulator, 12515Z internal Frame Coating, 12096 Gel Rust Dissolver, 51483Z Rust Converter,


    Application

    Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Rust Encapsulator can 10-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68°F. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.


    Safety

    always wear eye, skin and respirtaory protection. Apply in a well ventilated area away from open flame.


    Warranty

    Made in USA


    Application

    Wire Brush to remove loose rust, scale and paint. Remove dust, grease, oil deposits. Shake can for at least 2 mins after mixing ball starts to rattle.Feather surrounding paint with 220 grit sandpaper. Apply Rust Encapsulatorcan 10 to 12 inches from surface. Single coats dry to the touch in 20 minutes and arethoroughly dry in 3 to 4 hours at 68 degrees F. For greater durability a second coat can be applied one hour after the first. Allow 6 to 8 hours after last coat before applying top coat.


    Customers also viewed:

    Customer Reviews

    4 Item(s)

    per page
    works very well (Posted on 3/28/14)
    Review by william
    Quality
    Price
    Value
    works as advertised. Easy to use and gets good coverage. It made my rusty Mustang trunk(ie; the top of the gas tank) look new.
    was very happy with the product (Posted on 2/9/14)
    Review by Keith
    Price
    Value
    Quality
    It was very easy to use and worked good
    Great product (Posted on 12/27/13)
    Review by Eddie
    Price
    Value
    Quality
    Covers well, dries quick, easy to paint over.
    first time use (Posted on 12/24/13)
    Review by jon
    Value
    Quality
    Price
    I only used this once so far and am waiting to see how well it lasts

    4 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register