Item #51483 Z Brand: Eastwood

Value
Quality
Price

8 Review(s)

Only $19.99

Sale $12.99

Qty:

Add to Wishlist

Details

Rust Converter Aerosol stops residual rust, and turns it into a black, protective, ready-to-paint coating, without sanding Eastwood's own high-tech formula converts rust into a protective polymeric coating that's ready to go as a primer, and is compatible with most top coats. That new protective coating will also seal the surface against moisture to prevent future rust growth.

Just spray-on to transform the rust
Penetrates faster than other brands
No mixing needed
12-sq.-ft. coverage per can

Eastwood Metal Wash

Starting at: $9.99

1 Review(s) | Add Your Review

Eastwood PRE Painting Prep

Starting at: $7.99

5 Review(s) | Add Your Review

See this product in action!

About Eastwood Rust Converter Aerosol

This high-tech formula halts residual rust in its tracks and converts it into a black protective polymeric coating that eliminates the need for sanding. The converted protective coating is a suitable primer, and is compatible with most top coats. Additionally, the protective coating will seal the surface against moisture to prevent future rust growth. Applies easily: simply remove loose rust with a wire brush, then spray-on Eastwood’s Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black. Single component; no more mixing. 12-sq.-ft. coverage per can.

Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.

Eastwood Rust Converter, 13-oz. aerosol

Accessories

10041Z PRE Painting Prep
11949Z Low-VOC PRE Painting Prep
16060Z Rust Encapsulator
10025Z Chassis Black
11175Z Extreme Chassis Black
10426Z Underhood Detailing Kit

Always use appropriate eye, skin, and respiratory protection when using this product. Safety information is also described on the can. Consult MSDS (Material Safety Data Sheet) for proper safety requirement.

Click Here for Material Safety Data Sheet

For use on steel and iron only; DO NOT apply to paint. First use a wire brush to scrape rust off surface. Liberally spray-on Eastwood Rust Converter, let dry 20-30 minutes. Finally, apply top coat such as Eastwood Rust Encapsulator or Chassis Black.

Customer Reviews

Excellent spray pattern (Posted on 3/8/13) Review by Blue line

Value
Quality
Price

The spray pattern was great nice and wide didn't have to go back and forth like narrow spray paint

Meh? (Posted on 2/14/13) Review by Todd

Price
Value
Quality

Well, these sprays are ok, if the rust is only surface/topical. For that it works pretty well. I was hoping to repair a few difficult to reach spots and coat with Rust Encapsulator. Not so well. The thicker rust, I brushed with a wire brush as advertised and sprayed it down. The edges where the rust was very superficial turned black... as advertised. The heavier rusted areas just got minimally darker. No additional change. I decided it had to be that the rust was just too thick and cut the offensive areas out, or rather stopped at 2 spots as the rust was discovered to be just slightly thicker than the superficial rusty areas.
If your project has difficult to reach areas, where you just cant get to the spot to clear really good, I'm hitting it with Encapsulator. If the spot is a floorboard that I just don't want to mess with, I'll use Rust convertor.
I am very pleased with Eastwood parts and service. I have purchased sprays, paints, chemicals and a welder from them. This is a reputable company and I appreciate they're expertise and selection.

Rust Converter So-So (Posted on 8/18/11) Review by DEO

Value
Quality
Price

The first coat went on OK, but the second coat is on it's 3rd day and it's still tacky to the touch. I've had a fan blowing on it for the past 36 hours with no appreciable change. I may use acetone to try and remove it and either start all over or find something different to use as a rust inhibitor.

Rust Converter (Posted on 8/18/11) Review by DEO

Value
Quality
Price

It worked as advertised on one coat, but the second coat is on it's 3rd day and still is tacky to the touch. Don't think it will ever dry at this point, especially since I've had a fan blowing on the frame rail for 36 hours with little change. I'm going to try acetone to remove it and start all over. Mediocre result so far.

EW Rust Converter (Posted on 5/7/11) Review by JW

Value
Quality
Price

Its to early to give a good opinion on this product, however in 3 days their is a white film over rust spot, I removed white film and it looks like it is going to work as stated.

Great Product (Posted on 2/25/10) Review by DALE