MIG175 Welder and Cart Kit

    Item #20166 Brand: Eastwood

    Heavy Item - Special shipping charges may apply.

    Details

    Eastwood's MIG 175 Welder Kit with Cart,and Spool Gun: "high-end" features at a DIY price! As a professional or weekend enthusiast, with this welding kit you can now get industrial-quality features in a hard-workin', affordable, MIG welder! Our R&D guys designed the Eastwood MIG 175 Welder (12012) for steel and aluminum to produce excellent bead quality and capabilities that match—and even exceed—the more expensive competition! Helmet not included.
    • Welds mild and stainless steel, 24-ga. to 5/16"
    • Welds aluminum, 14-ga. to 1/4"
    • 30-175-amp welding range
    • FREE spool gun ($199.99 value!)
    • Includes a 3-shelf welding cart (12236)
    • Powered by 220v current
    • Compare to similar welders that sell for over $700
    • ETL Approved
    • Backed by Eastwood's no-hassle return policy and 3-year warranty

    Click here for warranty info

    About MIG175 Welder and Cart Kit

    MIG 175 welder with cart a is designed for the professional or weekend enthusiast. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 5/16" mild steel and stainless, plus 14-ga. to 1/4" aluminum. 3-shelf welding cart provides portability and stability for the welder and your gas cylinder.

    Welder has a 30% duty cycle at 135 amps, and 30-175-amp welding range. Feeds wire at 58"-471" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, spool gun (for welding 19-gauge to 1/4" aluminum plate), wire, tips and accessories...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration. Backed by Eastwood's no-hassle return policy and a 3-year manufacturer's warranty.(helmet not included)


    Contents

    12012 Mig 175 and 12236 Cart


    Specs

    Rated Electrical Input: 210-240 VAC; 50-60Hz; 22AMP
    Max Voltage at No Load: 20 V DC
    Rated Duty Cycle:130A@30% duty cycle
    Wire Feed Rate: 4.9 Ft/min – 39.3 Ft/min
    Wire Sizes: 0.025”(0.6mm) – 0.030”(0.8mm) mig wire 0.030”(0.8mm) – 0.035” Flux core wire
    Welding Wire Spool: 4” and 8” spool
    Weight: 62.0Lbs (24.5kg)
    Overall Dimensions: 24.4 (620mm) x 12.6” (320mm) x 16.9 (430mm)


    Safety

    Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants.


    Warranty

    3-year manufacturer's warranty.

    Click here for warranty information


    Instructions

    Click here for welder instructions


    Accessories & Consumables

    Replacement Parts

    12211 Contact Tip 0.023
    12224 Contact Tip 0.030
    12226 MIG Wire 0.023
    12227 MIG Wire 0.030
    12225 Flux Wire 0.030
    12239 Drive Roller
    12210 Tweco-Style Nozzle


    Customers also viewed:

    Customer Reviews

    4 Item(s)

    per page
    Gas issues (Posted on 4/30/2014)
    Review by Henry
    Quality
    Price
    Value
    So I had the original welder for a couple months, used maybe 20 times and the gas solenoid went and possibly the circuit board, so they sent me a replacement welder. One tac in and boom the solenoid went. Luckily I had a replacement from the last ordeal and put it in, it works but keeps the gas on waaay too long, so it wastes alot of gas. called TS again, they called me back said they'd put in for a new valve but I'v heard nothing yet. I am rather disappointed and will most likely never purchase a welder from them again. When it works it is nice. I haven't used the spool gun yet.
    Excellent buy (Posted on 3/26/2014)
    Review by Mark
    Quality
    Price
    Value
    Recently ordered and received the Mig 175, ordering process went very well and items arrived in the time frame that was advertised. Welder and cart were packaged very well and there was no shipping damage which made me very happy since I am on the West coast I was concerned about shipping. The cart took about 20 min to assemble and since I had already purchased Argon I fired up the welder, welded fantastic right out of the box, used the chart on the inside of the door that got me close and with a little lower voltage welded great, I purchased larger bottle of gas and the welder barely fit on the cart since it was tipped back a little other than that very satisfied. Have not tried the spool gun yet but expect it to work as it should. I had shopped prices for the big three brands but since I only use this for my occasional repair and hobby could not justify the prices, I was able to purchase this mig, the 60 amp plasma and the 200 amp Tig for what one of the big three machines would have cost. could not be happier, don't hesitate to go with this welder.
    I LOVE IT (Posted on 3/13/2014)
    Review by George
    Quality
    Price
    Value
    Ben. Welding for 30years I would rate the mig175 and plasma 60. 5 stars all around
    Save your money! (Posted on 3/3/2014)
    Review by Dan
    Quality
    Price
    Value
    I am "quasi" retired as an engineer and I currently restore really old cars for museums/collections; I have about a 4 year backlog. I own 2 Lincoln welders, a large TIG 275 and a 15 year old MIG 175SP set up with gas. I bought Eastwood's 175 MIG kit specifically to have it set up permanently with aluminum wire. It is simply cheap and should be clearly labeled as a do-it-yourself quality machine. From the factory the spool gun was wired backwards on my machine, I could NOT get customer service in a timely fashion and had to dig into the machine myself to find and FIX the problem by unsoldering, switching, and re-soldering two control leads. Simply unbelievable. Everything speaks "CHEAP" so loudly that I SERIOUSLY regret having not bought another Lincoln welder. Even the cart is so cheap that it did not even have a handle on it - I made one. My advice to others is that if you expect any reasonable service from your equipment AND the company selling it to you, then do NOT waste your money on this stuff. However, I will continue to use Eastwood for other products as their delivery to me (~80 miles from Pottsville, PA) is usually stellar and I "shop" sales through them.

    4 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register