Eastwood Aluma Blast Paint Aerosol 12 oz

    Item #10109Z

    Value
    Quality
    Price
    14 Review(s)

    Details

    Spray-on a protective, durable, aluminum-look finish with AlumaBlastâ„¢ Paint AlumaBlastâ„¢ Paint is specially formulated to duplicate the original look of freshly cast aluminum car parts, such as intake manifolds and transmission housings.
    • Protects up to 300 degreesF
    • Acrylic lacquer with low 4-15% gloss
    • Aerosol can covers 6 sq. ft.


    Do you have a product idea? Click Here to suggest it!

    About Eastwood Aluma Blast Paint Aerosol 12 oz

    Aluma Blast Paint is specially formulated to duplicate the original look of cast aluminum car parts. Protected up to 300 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on intake manifolds and transmission housings. Buy 3 or more, mix and match, and SAVE!


    Contents

    Aluma Blast is an Acrylic Lacquer that resembles fresh cast aluminum. Works great on Intake Manifolds, Transmission Housings and other cast aluminum parts. One aerosol can covers 6 sq. ft., Max Temp 300F.


    Accessories

    Use PRE Painting Prep (10041Z) to remove residual oil, grease, and silicones before coating. Buy 3 or more, mix and match, and SAVE!


    Warranty

    Made in the USA. 30 Day Eastwood Warranty. QUANTITY DISCOUNTS AVAILABLE FOR THIS ITEM


    Application

    Apply 2 medium coats for best results. We recommend PRE Painting Prep (10041 Z) to remove oil. Aluma Blast can be applied directly to bare metal surfaces. Aluma Blast is an Acrylic Lacquer that withstands up to 300 degrees F Each can covers 6 sq ft. For better durability, use our Self Etching Primer (16014 Z) Aerosol, or (16009 ZP) Quart. Use these products in a well ventilated area, or wear a respirator like our SAS Bandit Respirator (11455 or 11456).


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 14 total

    per page
    1. 1
    2. 2
    AlumaBlast paint (Posted on 5/21/14)
    Review by Mark
    Value
    Quality
    Price
    I bought this paint to use on a restoration project. I painted 4 brackets, all of which were steel, and an aluminum timing cover. Paint lays down nice, great coverage. Found it had a very slight gold cast to it, once dry. Seemed a little odd, but tolerable? I would buy this again, good stuff.
    Great product !! (Posted on 2/9/14)
    Review by Jerry
    Price
    Value
    Quality
    I have seen the Aluma Blast paint used in some automotive magazine articles. I was cleaning up some aluminum brackets and intake manifold for a project I am working on. I didn't like the looks of my parts after I beadblasted them. I bought some Aluma Blast and painted some of the parts I had cleaned up. I am amazed the way the parts turned out. I wish I would have used this paint in previous projects. The paint comes out of the can in a nice, controllable spray pattern.
    Perfect paint for Aluminum (Posted on 1/17/14)
    Review by 69ChevyK20
    Price
    Value
    Quality
    I use this paint on everything aluminum that I have to sandblast to clean, nothing works better or lasts longer than this paint. Makes all old aluminum parts look like new.
    Excellent (Posted on 6/18/13)
    Review by Reggie
    Price
    Value
    Quality
    Great stuff, dries quickly, excellent finish, great durability
    Very, Very Good (Posted on 6/3/13)
    Review by Todd
    Value
    Quality
    Price
    This paint is the absolute closest finish to bead-blasted aluminum there is. No Question. The surface though needs to be prepped well to achieve the best results
    good cosmetic fix (Posted on 12/1/12)
    Review by smokin327
    Quality
    Price
    Value
    I have this high value winter foundry hi rise manifold-wanted to have it ultrasonically cleaned to take it back to a factory look. vendor hasn't yet acquired the unit so i went for this paint job as a quick alternative. straight forward directions, easy to apply-layed down two coats. It covers nicely, even and I hit it with the gloss sealer twice and let it sit. my motorhead buddy stopped by and commented on how good the unit looked. works for me.
    Good Stuff (Posted on 3/25/12)
    Review by Bludeuce
    Price
    Value
    Quality
    Painted a transmission & intake, looks great. Very accurate representation of raw cast aluminum look. Beware overspray though, silver flecks everywhere.
    Great (Posted on 11/4/11)
    Review by Guy
    Quality
    Price
    Value
    Can't imagine why anyone would have any problem with this paint. It is just as described. Looks like brand new raw cast aluminum. Have used it on Transmission cases and Aluminum Intakes mainly, it's great paint and most accurate "aluminum look" I've ever ran across. Great stuff.
    eastwood alumablast (Posted on 7/9/11)
    Review by lito
    Price
    Value
    Quality
    I put this on my transmission for my 1967 saab incredible finish i highly recommend this product you cant go wrong..
    Good product (Posted on 2/26/11)
    Review by MRF
    Quality
    Price
    Value
    I used this product on my 54 chevy tranny case. Nice satin finish. Didn't look like " kentucky chrome".
    Very pleased.

    Items 1 to 10 of 14 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register