ElastiWrap™ Burn Out Black

    Item #ElastiWrap Burn Out Black 15049

    Details

    You can keep ElastiWrap™ on indefinitely or if you’re tired of the color, just peel it off and spray on a different color. That’s right, peel it off. It doesn’t harm the painted or bare surface underneath. In fact, it protects surfaces from UV damage, scratches and corrosion. Spray the high-build rubber coating on an unfinished surface to protect it until it’s ready to paint. Spray it directly on glossy clear coats, paint, unfinished metal and other surfaces for color and protection. The uses are endless for ElastiWrap™.
    • ElastiWrap™ is high-build and requires fewer coats than similar products
    • Available in gallons, quarts and aerosols
    • High temp resistant up to 350 degrees F
    • Applies easily with HVLP sprayer, Turbine, roller or brush
    • Scratch and abrasion resistant
    • Easy to touch up
    • Removes easily
    • Intermix Compatibility System – mix colors to create your own shade
    • UV resistant exceeded 500 hours of QUV testing (ASTM D4587)
    • Customize your own color using the Eastwood ElastiWrap 2-Color Intermix System!

    About ElastiWrap™ Burn Out Black

    ElastiWrap™ is a unique strippable rubberized coating that can be easily applied over most substrates and can remain in place indefinitely or be removed by simply peeling it off. ElastiWrap’s high build formula requires fewer coats and removes easier than similar products. It’s easy to apply; use a, brush, electric turbine sprayer, HVLP paint gun, or dip. Not only is ElastiWrap corrosion resistant, it’s UV, scratch and abrasion resistant too, and stable in extreme temperatures up to 350 degrees. Furthermore, ElastiWrap has its own intermix system, by mixing ElastiWrap primary colors you can create your own shade.

    Customize my own color using the Eastwood ElastiWrap 2-Color Intermix System!


    Accessories

    14933Z ElastiWrap™ Surface Prep aerosol
    14969 Microfiber cloth 3 pack
    13375 Soft Edge Masking tape
    11844 Canvas wheel masks
    14878 EW Turbine paint System
    12776 Evolution HVLP paint Gun
    11456 Respirator
    43098L Nitrile Gloves
    20406 Coveralls XL


    Safety

    Always wear eye skin and respiratory protection when applying this product. Apply in a well ventilated area away from open flame. Consult Product Information Sheet and MSDS for specific warnings and safety precautions.


    Tech Info

    Click here for product instructions


    Application

    IMPORTANT: Surface must be glossy and waxed to ensure easy removal of coating. See product Information sheet for specific set up and application.


    Customers also viewed:

    Customer Reviews

    9 Item(s)

    per page
    Excellent product (Posted on 8/5/2014)
    Review by Greg
    Price
    Value
    Quality
    Im really impressed with this stuff. My van turned out way better looking than I had expected. Im very happy with all my purchases from Eastwood.
    Difficult to manage (Posted on 7/24/2014)
    Review by Edward
    Quality
    Price
    Value
    While the product sprays on as expected, there is no way to protect non-sprayed areaa, without ruining the job....Basically , even with fine-line tape, you cannot stop overspray, without peeling off the entire area...I tried three times with differnt types of tape, and there is no way to leave an even line, or protect other areas.
    Difficult to manage (Posted on 7/24/2014)
    Review by Edward
    Quality
    Price
    Value
    While the coating works as it should, there is no way to tape off areas that you don't want to coat....If you tape them off, the tape (even fine-line), removes the coating or distorts the edge....Final verdict, you can't use it on only part of a part or panel...You must spray the entire part or panel.
    Bad finished product (Posted on 7/21/2014)
    Review by Robert
    Quality
    Price
    Value
    Bought one can just to try and glad that's all I purchased. I don't know if I got a bad can or what but it lost pressure and just began to spit beads of rubber. Looks horrible, and it's been a week since I have contacted eastwood and still no reply. I recommend you just paint your project instead of using this.
    Not as good as the marketing says. (Posted on 6/20/2014)
    Review by Brian
    Price
    Value
    Quality
    I used PlastiDip in the past and for the cost of ElastiWrap, Its not worth the extra cost. I had first can not empty all the way even with shaking all the time. This is first Eastwood product that I have been unhappy with.
    Severe orange peel finish (Posted on 6/16/2014)
    Review by Stu
    Quality
    Price
    Value
    Great coverage but did not flow out very well and dried to a very rough orange peel finish. But, maybe the room temperature was too high, going to try again.
    Great surface prep (Posted on 6/16/2014)
    Review by Stu
    Quality
    Price
    Value
    Gets the surface squeaky clean without cutting into it -- removed PlastiWrap leaves the original surface undamaged.
    I found it not that much better then PlastiDip (Posted on 6/14/2014)
    Review by Brian
    Price
    Value
    Quality
    I have used plastiDip in the past and due to sales pitch I tried ElastiWrap. I had one can not empty all the way and for the money, It is just not that superior. I can get PlastiDip local for less because no shipping. Sorry marketing guys this pro dust may be concentrated a little more but it not miles superior as I would expect with Eastwood product.
    great product (Posted on 6/8/2014)
    Review by matthew
    Price
    Value
    Quality
    I wanted to try Elastiwrap so I order a spray can. Now I want to do y whole truck. so easy and great coverage.

    9 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register