ElastiWrap™ Gray Metallic

    Item #ElastiWrap Gray Metallic 15058

    Details

    You can keep ElastiWrap™ on indefinitely or if you’re tired of the color, just peel it off and spray on a different color. That’s right, peel it off. It doesn’t harm the painted or bare surface underneath. In fact, it protects surfaces from UV damage, scratches and corrosion. Spray the high-build rubber coating on an unfinished surface to protect it until it’s ready to paint. Spray it directly on glossy clear coats, paint, unfinished metal and other surfaces for color and protection. The uses are endless for ElastiWrap™.
    • ElastiWrap™ is high-build and requires fewer coats than similar products
    • Available in gallons, quarts and aerosols
    • High temp resistant up to 350 degrees F
    • Applies easily with HVLP sprayer, Turbine, roller or brush
    • Scratch and abrasion resistant
    • Easy to touch up
    • Removes easily
    • Intermix Compatibly System – mix colors to create your own shade
    • UV resistant exceeded 500 hours of QUV testing (ASTM D4587)
    • Customize your own color using the Eastwood ElastiWrap 2-Color Intermix System!

    About ElastiWrap™ Gray Metallic

    ElastiWrap™ is a unique strippable rubberized coating that can be easily applied over most substrates and can remain in place indefinitely or be removed by simply peeling it off. ElastiWrap’s high build formula requires fewer coats and removes easier than similar products. It’s easy to apply; use a, brush, electric turbine sprayer, HVLP paint gun, or dip. Not only is ElastiWrap corrosion resistant, it’s UV, scratch and abrasion resistant too, and stable in extreme temperatures up to 350 degrees. Furthermore, ElastiWrap has its own intermix system, by mixing ElastiWrap primary colors you can create your own shade.

    Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.

    Customize my own color using the Eastwood ElastiWrap 2-Color Intermix System!


    Accessories

    14933Z ElastiWrap™ Surface Prep aerosol
    14969 Microfiber cloth 3 pack
    13375 Soft Edge Masking tape
    11844 Canvas wheel masks
    14878 EW Turbine paint System
    12776 Evolution HVLP paint Gun
    11456 Respirator
    43098L Nitrile Gloves
    20406 Coveralls XL


    Safety

    Always wear eye skin and respiratory protection when applying this product. Apply in a well ventilated area away from open flame. Consult Product Information Sheet and MSDS for specific warnings and safety precautions.


    Tech Info

    Click here for product instructions


    Application

    IMPORTANT: Surface must be glossy and waxed to ensure easy removal of coating. See product Information sheet for specific set up and application.


    Customers also viewed:

    Customer Reviews

    3 Item(s)

    per page
    Great surface prep (Posted on 6/16/2014)
    Review by Stu
    Quality
    Price
    Value
    Gets the surface squeaky clean without cutting into it -- removed PlastiWrap leaves the original surface undamaged.
    nice color and shine (Posted on 6/8/2014)
    Review by rocket
    Value
    Quality
    Price
    I tried the aerosol on a test piece today,the small plastic bowtie off of my S-10 emblems,IT says to wash with soap/water,then use Elastiwrap cleaner,which leaves a wax coating to make adhesion better and removal easier,or use PRE-cleaner if heavily soiled. I did not have the wrap cleaner or PRE.I had some acetone,but did not want to try on plastic,so I washed real good then applied an auto cleaner wax to one side of test piece.Applied 3 coats of color and 3 coats of clear to both sides w/10 min.flash time between coats. IT looked real nice under shop lights and great in sun.AS for adhesion and peel off with my method,???? Will test that later. Oh , and this stuff is very nasty in the air. I was only spraying 2 short bursts for each coat and I had door open and fan on in garage.I would leave briefly ,but it kept it "stinky".
    Excellent coating (Posted on 6/6/2014)
    Review by Brent
    Price
    Value
    Quality
    Having already spraying one of my cars with the competition's version of this color, I can say that the quality of the coating, the easy of use, and the end results are beyond compare. Great metal flake, even finish (kind of a satin), definitely high build (two coats over white to full opacity), and great auto-leveling properties. Peelable with just four coats AND ships to CA?! Wow.
    Suggestions to Eastwood: Post more product details such as finish without top coats, details on the pearlizer, and make some videos demoing what will likely rock the competition's world.

    3 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register