Eastwood Dual Voltage HotCoat Powder Coating Gun

    Item #11676 Brand: Eastwood

    Quality
    Price
    Value
    23 Review(s)

    Details

    Dual-Voltage HotCoat Powder-Coating Gun gives you the most complete coverage from tight areas to large surfaces With our dual-voltage HotCoat powder coating gun, you can powder coat interiors and hard-to-reach corners!
    • Extremely durable finish
    • Coat and cure in under an hour!
    • Easy to apply
    • Quick color changes
    • Economical
    • Versatility with 2 settings
    • Low 15,000-volt setting
    • High 25,000-volt setting for multi-coat coverage over larger areas
    • Increased powder adhesion
    • Minimal overspray

    Either way, you'll get all the benefits of powder coating in your own shop!

    About Eastwood Dual Voltage HotCoat Powder Coating Gun

    The Dual Voltage HotCoat gun is one of the best powder coating guns on the market today. Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

    One 8-oz. bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents. HotCoat powder coating requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).


    Contents

    Includes the Dual-Voltage HotCoat Powder Coating Gun, dual-voltage power supply, activation switch, ground clamp and cable, 1/4" NPT air fitting, and empty 8-oz. bottle.


    Specs

    Accessories

    58112 Silicone Cap & Plug Kit
    10041Z PRE Painting Prep
    19418ZP Fast Etch Rust Remover and Metal Prep
    12850 Powder Coat & Paint Dissolver (Gal.)
    51558 HotCoat Powder Coating Chip Chart
    10421 High-Temp Masking Tape Kit
    11476 Compact Infrared Non-Contact Thermometer
    10255 Hotcoat Powder High-Tech Color Sample Kit


    FAQs

    (Q) How long does the baking process take?
    (A) For improved flow out (less "orange peel"), bake coated parts at 500 degreesF until powder flows out (about 3-4 minutes for light sheet metal parts), then turn down the heat to 400 degreesF for a full 15 minutes.

    (Q) How can I improve transfer efficiency?
    (A) The 10128 HotCoat High-Performance Deflector greatly improves transfer efficiency. Use the Standard Deflector for getting powder in recessed areas.

    (Q) What are the electrical requirements?
    (A) This HotCoat Gun requires 105-125VAC, 2 amps at 50-60 Hz. Can be used with a voltage transformer such as 220-230VAC to 105-125VAC as long as the transformer can handle 2 amps.


    Safety

    Use a disposable dust mask when handling or applying powder. Powder, like common flour, can be explosive when suspended in the air in high concentrations. To minimize any explosion risk, sweep up—do not vacuum—powder from the floor. Cure powder in a well-ventilated area. The urethane powders we sell liberate a very minute amount of isocyanates when the powder flows out. This usually occurs about 3-5 minutes after the part is placed in the oven to bake. Wear a respirator with fresh filter cartridges when curing or inspecting flow-out progress.


    Warranty

    One Year Manufacturer's Defect Warranty.

    Designed, engineered and tested to Eastwood's specifications.

    Final product imported.


    Instructions

    Click here for instructions


    Customers also viewed:

    Customer Reviews

    Items 11 to 20 of 23 total

    per page
    1. 1
    2. 2
    3. 3
    pretty damned good (Posted on 8/25/12)
    Review by jim
    Price
    Value
    Quality
    I had the original hot coat gun and it was hit and miss most of the time but generally worked OK (it had the leaking powder issue). The dual voltage gun is light years ahead of the old one in this regard. There really is no need considering the single voltage gun anymore. It works like the old one should have from the beginning. Do yourself a favor and get this one not the 'other' one.
    Don't waste your money (Posted on 7/11/12)
    Review by Bart B
    Price
    Value
    Quality
    I bought the Dual voltage gun and I used it once and the lid was cracked,it leaked more powder then what came out of the end of the gun. I returned it and received another gun and it leaked the same as the first one, I have a glued it and it worked ok for little while, glued it again and now the lid itself is stripped out where the bottle screws on. (still leaks)I would be willing to pay more money for a better product and all they need to do is make the lid out of metal and seal it properley. I am now buying a REAL powder gun and powder from another supplier.
    Bad quality gun (Posted on 3/21/12)
    Review by amog4life
    Quality
    Price
    Value
    I purchased the gun and instantly it was leaking from where the cup connects to the gun. After a few days of use and not paying any mind to the leak, the gun stooped working. I had to figure out the issue myself since i did not want to send it out and wait for them to send it back. The switch to trigger the charge was also made very cheap and the wire disconnected itself from the switch. I fixed that. After that i decided to contact Eastowood about the leak and they send me instructions on how to fix the issue myself. I had only own the gun for less than a month and they tell me how to fix it. Also the way they instructed me to fix the gun is probably the way the gun should be manufactured from the start. The fact that they had a whole PDF file with pictures and instructions on how to fix it, leads me to believe that these guns go bad all the time. Bad quality gun. Would not recommend to anyone.
    Awesome. First powder gun ever owned (Posted on 3/7/12)
    Review by Kam
    Price
    Value
    Quality
    First time powder-coater here. My dad got me this gun for Christmas while it was on sale. I've been able to do small miscellaneous parts for my car with ease. I didn't have the money to buy an oven off here, so I just found one on craigslist for $20 that cures my projects just fine. Saves me money from doing it elsewhere. Planning on offering it as a service to the local area as soon as space is made in our garage and the sandblasting cabinet is assembled. Couldn't have been happier.
    Works fine, but has the usual leak (Posted on 1/1/12)
    Review by Phastphil
    Quality
    Price
    Value
    Worked as expected, right down to the leak where the barrel attaches to the bottle lid. Since I expected this, I fixed it w/ clear epoxy. Otherwise, the gun works great for large areas, on the High setting.I tried to put a high performance deflector on it, but the emitter is smaller than on the standard gun. I used more epoxy to hold it in place. Haven't tried it w/ the deflector yet, but will very soon. It might not be needed, but I'll find out. Overall, I'm happy with it.
    Very Satisfies (Posted on 12/18/11)
    Review by GTA89CONV
    Quality
    Price
    Value
    Have original system..worked ok. Was looking to have better coverage with less waste. Designed a nozzel for the original that directed powder much better that those that came with system, Using this new....higher voltage system is great. We finished a group of hinges we were using outside on a building. Coverage was quicker, thicker coating, thus much better flow and coverage. Thanks Eastwood, for this product.
    Excellent product and value (Posted on 12/17/11)
    Review by Dave M
    Quality
    Price
    Value
    I was fortunate enough to pick the gun up at a rock bottom sale price and knowing nothing about powder coating was able to knock out great looking parts in notime. I suck at painting and this thing made me look like a rock star
    Great buy (Posted on 12/14/11)
    Review by Jon-Michael
    Price
    Value
    Quality
    Powder gun is amazing!!! works like its suppose to. I totally reccommend anyone to buy this, i have powder coated several parts now!!!
    Great item (Posted on 11/26/11)
    Review by RadicalRacing
    Price
    Value
    Quality
    To be honest I did not think this product would perform the way it did. Really awsome product, despite simple design an low cost materials.However this proves the fact that things dont have to be over- engeneered to work.I now have 4 units, and this makes colorchanges easier. If youhave to change from black to white you have to make sure the gun is ABSOLUTELY clean. One black fragment in the white finish....You do the math.. I have one gun for white,one for clear, and to for all others. -Easy(and looks cool...) I also purchased a lot of bottles so I dont have to empty one to cange colors. Cheap and time saving. I would also recomend 2 steps to better the performance of this gun: 1: I glued the activator switch to the left side of the gun handle. This makes it possible to use the thumb to activate the power. Left hand is then free .
    2: I put a thin rubber gasket inside the lid attached to the gun. This makes a good seal, -without it the gun can leak powder through the bottle threads. Summary: I love it!!!
    Get this one. (Posted on 5/7/11)
    Review by Bill
    Value
    Quality
    Price
    I bought the original gun first, but it leaked powder from the cap and returned it. Since I just got hooked on coating on my options to replace the gun were limited on a system due to my budget.

    I decided to buy the dual voltage Hotcoat gun. After the first use I was ecstatic the thing did not leak at all.

    I cannot believe how much better the dual voltage unit is over the original system. My only complaint and it is the same for the original, but the grounding clip is very wimpy.

    Do yourself a favor, buy this system instead of the original system. For the few extra dollars it costs, it is worth every penny.

    Items 11 to 20 of 23 total

    per page
    1. 1
    2. 2
    3. 3

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register