Eastwood Dual Voltage HotCoat Powder Coating Gun

Item #11676 Brand: Eastwood

Quality
Price
Value

18 Review(s)

Details

Dual-Voltage HotCoat Powder-Coating Gun gives you the most complete coverage from tight areas to large surfaces With our dual-voltage HotCoat gun, you can powder coat interiors and hard-to-reach corners!

Extremely durable finish
Coat and cure in under an hour!
Easy to apply
Quick color changes
Economical
Versatility with 2 settings
Low 15,000-volt setting
High 25,000-volt setting for multi-coat coverage over larger areas
Increased powder adhesion
Minimal overspray

Either way, you'll get all the benefits of powder coating in your own shop!

About Eastwood Dual Voltage HotCoat Powder Coating Gun

Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

One 8-oz. bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents. HotCoat powder coating requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).

Includes the Dual-Voltage HotCoat Powder Coating Gun, dual-voltage power supply, activation switch, ground clamp and cable, 1/4" NPT air fitting, and empty 8-oz. bottle.

Accessories

58112 Silicone Cap & Plug Kit
10041Z PRE Painting Prep
19418ZP Fast Etch Rust Remover and Metal Prep
12850 Powder Coat & Paint Dissolver (Gal.)
51558 HotCoat Powder Coating Chip Chart
10421 High-Temp Masking Tape Kit
11476 Compact Infrared Non-Contact Thermometer
10255 Hotcoat Powder High-Tech Color Sample Kit

(Q) How long does the baking process take?
(A) For improved flow out (less "orange peel"), bake coated parts at 500 degreesF until powder flows out (about 3-4 minutes for light sheet metal parts), then turn down the heat to 400 degreesF for a full 15 minutes.

(Q) How can I improve transfer efficiency?
(A) The 10128 HotCoat High-Performance Deflector greatly improves transfer efficiency. Use the Standard Deflector for getting powder in recessed areas.

(Q) What are the electrical requirements?
(A) This HotCoat Gun requires 105-125VAC, 2 amps at 50-60 Hz. Can be used with a voltage transformer such as 220-230VAC to 105-125VAC as long as the transformer can handle 2 amps.

Use a disposable dust mask when handling or applying powder. Powder, like common flour, can be explosive when suspended in the air in high concentrations. To minimize any explosion risk, sweep up—do not vacuum—powder from the floor. Cure powder in a well-ventilated area. The urethane powders we sell liberate a very minute amount of isocyanates when the powder flows out. This usually occurs about 3-5 minutes after the part is placed in the oven to bake. Wear a respirator with fresh filter cartridges when curing or inspecting flow-out progress.

One Year Manufacturer's Defect Warranty.

Designed, engineered and tested to Eastwood's specifications.

Final product imported.

Click here for instructions

Customer Reviews

Very Satisfies (Posted on 12/18/11) Review by GTA89CONV

Quality
Price
Value

Have original system..worked ok. Was looking to have better coverage with less waste. Designed a nozzel for the original that directed powder much better that those that came with system, Using this new....higher voltage system is great. We finished a group of hinges we were using outside on a building. Coverage was quicker, thicker coating, thus much better flow and coverage. Thanks Eastwood, for this product.

Excellent product and value (Posted on 12/17/11) Review by Dave M

Quality
Price
Value

I was fortunate enough to pick the gun up at a rock bottom sale price and knowing nothing about powder coating was able to knock out great looking parts in notime. I suck at painting and this thing made me look like a rock star

Great buy (Posted on 12/14/11) Review by Jon-Michael

Price
Value
Quality

Powder gun is amazing!!! works like its suppose to. I totally reccommend anyone to buy this, i have powder coated several parts now!!!

Great item (Posted on 11/26/11) Review by RadicalRacing

Price
Value
Quality

To be honest I did not think this product would perform the way it did. Really awsome product, despite simple design an low cost materials.However this proves the fact that things dont have to be over- engeneered to work.I now have 4 units, and this makes colorchanges easier. If youhave to change from black to white you have to make sure the gun is ABSOLUTELY clean. One black fragment in the white finish....You do the math.. I have one gun for white,one for clear, and to for all others. -Easy(and looks cool...) I also purchased a lot of bottles so I dont have to empty one to cange colors. Cheap and time saving. I would also recomend 2 steps to better the performance of this gun: 1: I glued the activator switch to the left side of the gun handle. This makes it possible to use the thumb to activate the power. Left hand is then free .
2: I put a thin rubber gasket inside the lid attached to the gun. This makes a good seal, -without it the gun can leak powder through the bottle threads. Summary: I love it!!!

Get this one. (Posted on 5/7/11) Review by Bill

Value
Quality
Price

I bought the original gun first, but it leaked powder from the cap and returned it. Since I just got hooked on coating on my options to replace the gun were limited on a system due to my budget.

I decided to buy the dual voltage Hotcoat gun. After the first use I was ecstatic the thing did not leak at all.

I cannot believe how much better the dual voltage unit is over the original system. My only complaint and it is the same for the original, but the grounding clip is very wimpy.

Do yourself a favor, buy this system instead of the original system. For the few extra dollars it costs, it is worth every penny.

can't beat it. (Posted on 10/23/10) Review by james

Price
Value
Quality

This is the best gun at the cheapest price. coats great. easy to use. stands up against the high priced guns.

www.griffinsautoservice.net

Awesome tool (Posted on 2/22/10) Review by Tony

Quality
Price
Value

I am very pleased with the simple process of coating with this gun. I need to make a dedicated area to apply the coating for easier cleanup. I tackled small parts and now ready to coat some wheels. Great tool to have in your shop.

excellent product (Posted on 1/9/10) Review by aldolabs