Eastwood 2K Self Leveling Seam Sealer Cartridge

    Item #51653Z Brand: Eastwood

    Price
    Value
    Quality
    6 Review(s)
    Use in a well ventilated area.

    Details

    After stripping a car or repairing a panel you should replace the seam sealer to protect your work from the elements. Eastwood's high-solids 2-component Self-Leveling Seam Sealer leaves a factory-like finish and will not crack or sag. Seals cracks, crevices and body seams as well as waterproofs and insulates. The specially designed 2 chambered cartridge and mixing tip ensure that you lay out a perfectly mixed bead. Work time is 5-10 minutes, paintable in 30-60 minutes and fully cured in 4 hours. Use on firewall and trunk seams, fender extensions, tail light openings, etc. Uses 26:1 application gun, item 46613

    About Eastwood 2K Self Leveling Seam Sealer Cartridge

    After stripping a car or repairing a panel you should replace the seam sealer to protect your work from the elements. Eastwood's high-solids 2-component Self-Leveling Seam Sealer leaves a factory-like finish and will not crack or sag. Seals cracks, crevices and body seams as well as waterproofs and insulates. The specially designed 2 chambered cartridge and mixing tip ensure that you lay out a perfectly mixed bead. Work time is 5-10 minutes, paintable in 30-60 minutes and fully cured in 4 hours. Use on firewall and trunk seams, fender extensions, tail light openings, etc. Uses 26:1 application gun (#46613)


    Contents

    250 Ml cartridge includes 2 mixing tips


    Accessories

    10041Z PRE Painting Prep 31050 Flexible Caulk Strips 16006Z Cold Galvanize primer 16014Z Self Etching Primer 19613 320 Grit 9x11 sand paper 20457 12 pack of mixing tips


    MSDS Sheet

    Click Here for Material Safety Data Sheet


    Safety

    always wear eye, skin and respiratory protection when working with chemicals consult MSDS for proper safety warnings


    Warranty

    Made in Canada


    Application

    Make sure vehicle is on level ground. Remove old sealer. Wipe down area with PRE (10041z) to remove any debris and dust. Sand surface and apply primer/surfacer, let dry and sand with 320 grit abrasive. Install mixing tip. Put tube in 26:1 application gun (46613) and equalize the two parts until they are uniform in color. Apply product to surface. This product will flow out and self level.


    Customers also viewed:

    Customer Reviews

    6 Item(s)

    per page
    not worth the money (Posted on 6/15/14)
    Review by David
    Quality
    Price
    Value
    Product came with 2 nozzles but it sets so fast I used these up real quick now eastwood says they don't sell the nozzles separate so the 3/4 tube is wasted
    Works great. (Posted on 9/30/13)
    Review by Eldin
    Quality
    Price
    Value
    If you follow the directions it works perfectly. It is easily sanded after removing the tape from the ends of the driprail.
    Very tempermental but effective!! (Posted on 6/24/13)
    Review by A Gonz
    Value
    Quality
    Price
    This stuff is great! Its very tempermental so VERY VERY VERY short bursts on the trigger will result in seam sealer being expelled for 3-10 seconds. Which can be annoying if you dont need that much. However I soon learned that it takes a delicate trigger finger and a lot of patience. This product works great and Im actually going to buy another catridge. Much better then me welding all the panel seams to shave my engine bay!
    Made it work but wouldn't buy again (Posted on 6/2/13)
    Review by steve
    Value
    Quality
    Price
    This stuff is nearly impossible to use to seal driprails. I taped up the ends of the drip rails per the recommendation on the tube and it turned into a total mess! The sealer was running all over the place and could not be contained! I will admit that after the massive cleanup the final product looks pretty nice but I still wouldn't put myself through that again!! I would caution against buying this if you value your time!!
    Didn't work for me (Posted on 8/25/12)
    Review by Cuda
    Price
    Value
    Quality
    Very watery, Would run down the side if I used it, Might be good for flat surface but not on door jams.
    2K self leveling seam sealer (Posted on 7/7/12)
    Review by pharmcarhigh
    Quality
    Price
    Value
    Used this on the drip channel on a classic mustang. Application was very smooth and the product leveled out as stated. Work quickly with this product you have about 5 mins before it sets. Only downside is that the tube is a standard sized caulk tube, but only half filled with product. If you use this keep in mind the caulk gun ( i used a standard caulk gun from home depot) it will only go half way, so don't force it.

    6 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register