- Home
- AutoBody
- Seam Sealers
- Eastwood Seam Sealer Cartridge Beige
- Product Reviews
Details
Paintable Beige Seam Sealer leaves a factory-like finish that won't harden or sag
After stripping a car or repairing a panel, replace the seam sealer to protect your hard work from the elements.
- Stays flexible; won't crack
- Waterproofs and insulates
- For firewalls, floor pans, trunk seams, fender extensions, taillight openings
- Applies easily with your standard caulking gun
Eastwood Seam Sealer Cartridge Black
Only
$12.99
As low as:
$11.99
|
Eastwood Original Chassis Black PaintStarting at: $12.99 |
Eastwood PRE Painting PrepStarting at: $7.99 |
See this product in action!
About Eastwood Seam Sealer Cartridge Beige
Eastwood's high-solids Beige Seam Sealer seals cracks, crevices and body seams, as well as waterproofs and insulates; remains flexible. Adheres to paint; tack-dries in 15 minutes, air dries in 1 hour. Beige in color, but can be painted after 1 hour. Use a standard caulking gun to apply.
10.6-oz. cartridge of Beige Seam Sealer
16037 Rust Dissolver. Use to remove light rust before using this Self-Etching Primer
Always wear eye, skin and respiratory protection when working with chemicals. Consult MSDS for proper safety warnings.
Customer Reviews
3 Item(s)
per page
-
Works Great!
(Posted on 1/12/13)
Review by Bart -
It took a short bit of practice, being used to brushable seam sealer, but once I found that it's Toluene-based it was easily spreadable with a dampened paper towel and cleans up in a jiffy. I did the rain gutters on my car by laying down a 3/16" bead quickly followed by a Toluene-dampened towel wrapped around my index finger and worked it from one end to the other, then went back a half hour later and wiped away the excess. Definitely will use it again.Value Quality Price -
Don't waste your time or money
(Posted on 10/4/11)
Review by matt -
I used the old beige seam sealer that wasn't the Eastwood brand and worked fine. This seam sealer will not dry. I used an entire tube on the drip rail on my classic car. I let it sit for an entire week. It never dried. I spent an entire day trying to remove the undried sealer without scratching my primer.Value Quality Price -
Did not like
(Posted on 7/15/10)
Review by Mark -
I did not like this product.it never would dry completely.It is impossible to sand or spread with a brush.Value Quality Price
3 Item(s)
per page
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|