Eastwood MIG Welder 135 Amp

    Item #12011 Brand: Eastwood

    Price
    Value
    Quality
    156 Review(s)
    Heavy Item - Special shipping charges may apply.

    Details

    Eastwood's own MIG 135 Welder: as good as the "name brands", but at a fraction of the price!

    As a home hobbyist or light fabricator, you don't need to spend more for a "brand name" industrial MIG welder. Our R&D guys developed the Eastwood MIG 135 Welder from scratch to produce excellent bead quality and capabilities that match—and even exceed—the more expensive MIG welders for sale!

    • Welds mild and stainless steel, 24-ga. to 1/4"
    • 25-135-amp welding range
    • Tweco-Style Gun and Consumables
    • Powered by standard 120v household current
    • Ships with regulator and hose for MIG welding. Can also be used for Flux-Core welding.
    • Compare to similar welders that sell for over $500
    • Backed by Eastwood's no-hassle return policy and 3-year warranty. Try it out for 30 days and if you don't like it, return it for a full refund!

    About Eastwood MIG Welder 135 Amp

    MIG 135 welder is designed for the home hobbyist and light fabricator. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 1/4" mild steel and stainless. Welder has a 20% duty cycle at 90 amps, and 25-135-amp welding range. Feeds wire at 39"-468" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, wire, tips and other MIG welding equipment...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration and flawless welds. Backed by Eastwood's no-hassle return policy and a 3-year manufacturer's warranty.

    Click here for warranty information


    Contents

    MIG 135 Welder (57 lbs.)
    0.023" Steel MIG Wire
    Extra 0.023" Contact Tip
    Gas Regulator with hose
    Tweco-Style Gun and Consumables
    Switchable Drive Roller
    8' Ground Cable and Gun Cable
    Wire Brush
    Welding Face Shield
    3-Year “No Hassle” Warranty


    Specs

    Output Amperage Range: 25-135 A
    Maximum Output No Load Voltage: 28 V DC
    Maximum Input Amperage: 20 Amp
    Input Voltage: 120 VAC 60 Hz
    Rated Duty Cycle: 20% @ 90 A
    Wire Feed Rate: 40-450 IPM
    Welding Wire Spool Sizes: 4-8 in
    Weight: 56 Lbs. (25kg)
    Overall Dimensions: 16.5” (408 mm) x 9.6” (244 mm) x 14.5” (367 mm)
    Wire Type & Diameter: Solid 0.023-0.030in (0.6-0.8mm), Stainless 0.023-0.030in (0.6-0.8mm), Flux Cored 0.030-0.035in (0.8-0.9mm)


    Instructions

    Click here for product instructions


    Safety

    Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants.


    Warranty

    Click here for warranty info


    Instructions

    Click here for product instructions


    Welding steel, stainless metals: this unit welds 20- and 18-gauge body panels beautifully. The amperage and output voltage can be controlled precisely to get the proper penetration required. The wire speed can be infinitely adjusted also to gain proper wire fill in the weld pool. This unit has been compared to the leading U.S.-manufactured red welders with equal results at a fraction of the cost. The drive roll mechanism, the heart of any MIG welder, is designed to our specifications and delivers flawless wire feed without skipping or slipping on the wire.


    Accessories & Consumables

    Replacement Parts
    12211 Contact Tip 0.023
    12224 Contact Tip 0.030
    12226 MIG Wire 0.023
    12227 MIG Wire 0.030
    12225 Flux Wire 0.030
    12239 Drive Roller
    12210 Tweco-Style Nozzle

    Accessories
    TIG Welding Cart
    Auto Darkening Welding Helmet
    Welding Jacket
    Large View Auto Darkening Helmet
    Welding Gloves

    Consumables
    Contact Tip, 0.023 Inch
    Contact Tip, .030 Inch
    MIG Wire, 0.023 Inch
    MIG Wire, .030 Inch
    Flux Cored Wire 0.030 Inch
    MIG Nozzle


    Customers also viewed:

    Customer Reviews

    Items 101 to 110 of 156 total

    per page
    Great welder, great price (Posted on 3/14/12)
    Review by Jae
    Price
    Value
    Quality
    I've owned this welder for about a month now and am thrilled with it so far. After using a Harbor Freight 90A welder for a few weeks I knew I needed something better. I tried out my friend's Lincoln Handy Mig, and was just about sold on it, but the infinitely variable voltage control was what really sold me on the Eastwood. Now after using the MIG135 for a few weeks, I honestly feel I made the better choice. So far I've used it to build a trailer, welding mostly .090" and .120" wall steel using .030" flux core wire, and I couldn't be happier with the results. I'm looking forward to adding gas and trying it out with some .023" wire on some thin sheet.
    Not bad for a little guy (Posted on 3/14/12)
    Review by Hawk
    Price
    Value
    Quality
    I have not welded in a several years, and now I have started a new Toyota FJ45 rebuild project. I use to own a Miller Mig welder, and love them but cost was an issue. Lots of body work to be done on the PU box. All I had at the time was the good old stick welder, and that's not going to do the sheet metal work I have to do so looked into a small but reliable Mig welder and came across the Eastwood Mig 135.
    All I can say is from the five minutes of adjustments I did with the controls and a few test runs I was welding grate welds just as I had done with my Miller. This machine is not high end as some of the big names but it holds its own. With proper use and care it should last a long time in the shop.
    Great machine, Great price (Posted on 3/13/12)
    Review by Andrew
    Price
    Value
    Quality
    I did a LOT of research before I bought this welder. I looked in to all the other brands, read all the reviews, and asked around. I found that this was about the best deal anywhere.

    I'm not a very experienced welder, but I found this machine to be super easy to set up and use. I just got it last week, and played first with some .35 flux core wire. I welded some sheet steel (22 ga), and got pretty good at it. I also did some thicker stuff, up to 1/4". The setting chart on the welder makes it easy to find initial settings. Having the infinite adjustments on both the wire feed and the voltage is nice, unlike other welders on the market you can fine tune the settings to just where you want them.

    I went out and bought a tank of shielding gas today- and I'm absolutely amazed at how well this welder performs! I did a quick patch panel on a junk fender, and got excellent results- And no blow through even on the thin sheet metal I was using. I can't believe that I was able to do this well the first time I tried!

    I did some thicker material as well, and found that it handles that beautifully as well. I can't wait to get started on some real projects!

    Can't be beat for the price (Posted on 3/10/12)
    Review by Mark75H
    Price
    Value
    Quality
    A competent little welder, but not worth a penny more than they get for it.

    Ground wire came off the clamp after about 3 ft of bead ... trigger wire ends fell off while I was assembling the machine the first time. Several other minor quality problems that weren't worth sending it back by freight. If I had bought it locally I wouldn't have fixed it myself, I would have taken it back for replacement.

    You CAN weld aluminum with it, but ONLY if you find the stiffer magnesium alloy wire.

    The fact that the wire and gas feed start at the same time makes the beginning of an aluminum bead a problem. If there was a slight delay in the wire, it would work much better ... it could be a minor software upgrade. I'm probably going to add a purge/pre-weld switch to the gas solenoid.

    If you plan on welding a lot of aluminum ... save a few more pennies and buy something farther up the line
    great buy (Posted on 2/3/12)
    Review by enlarry
    Price
    Value
    Quality
    i have owned a few mig welders this one was great straight out of the box nice welds best of all great price
    Unit I'd great (Posted on 12/31/11)
    Review by Billy bad ass
    Quality
    Price
    Value
    Great unit for the price. Would recommended this unit to anyone that is on a budget. This thing throws down some nice welds once it is set up correctly.
    Good Value for Price and Quality (Posted on 12/29/11)
    Review by Martin
    Quality
    Price
    Value
    So far so good! Shopped around and this unit seemed best value for features, quality, price.
    Best features:
    Infinite power & speed controls
    Cable-hose length
    Gas valve & pressure gauge decent quality.
    Amps for 120 volt model.
    I think is is very good value. I never welded B-4.
    Just used this a little so far and I found it very easy to MIG with gas. Welded some decorative coat hooks from horse shoes. I will use it more w/ flux core wire sicne I want to weld thicker steel, but I chose 120 volt model for more portability. I went on YouTube learned basics for welding.

    graet welder!!! (Posted on 12/18/11)
    Review by pops
    Quality
    Price
    Value
    i got this welder several months ago, have had other similar welders but this east wood mig 135 beats them hands down!!! great unit for the money!!! the only thing i do not like about this unit is the fact that it keeps blowing gas about 2 seconds after you let go of the trigger!! which i believe is wasting gas and see no real benefits from it doing this?? any feed back from any one with this same concern would be appreciated!! other than that i have no other complaints about the quality of this unit, great little unit!!!! elmerfurst@gmail.com
    GREAT Welder For The Money! (Posted on 12/10/11)
    Review by Buzzman72
    Price
    Value
    Quality
    Bought my MIG 135 in July, and I've had some time to run it on flux-core wire. I've gotta say I really like the infinitely variable adjustments on BOTH wire speed AND voltage--I don't know of any other welders in this price range with BOTH! My ONLY complaint was that I had to lengthen both control wires about 2" in order to be able to connect them [don't worry, Ma...splices are soldered, and then covered with heat-shrink insulation]. If the control wires had been long enough, I'd have given the welder 5 stars ALL THE WAY !
    WOW (Posted on 12/4/11)
    Review by Phillip
    Price
    Value
    Quality
    I was hesitant on purchasing a 110 volt welder especially for such a low price,I took a shot and WOW was I surprised when I was welding on my Jeep XJ rock crawler,This machine welded 3/16th pipe to 1/4 square tube like nothing. This machine welds so smooth and what a nice bead. Strongly recommend this unit to anyone. Eastwood,you guys are awesome. Thanks,Bud

    Items 101 to 110 of 156 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register