Eastwood MIG Welder 135 Amp

    Item #12011 Brand: Eastwood

    Quality
    Price
    Value
    157 Review(s)
    Heavy Item - Special shipping charges may apply.

    Details

    Eastwood's own MIG 135 Welder: as good as the "name brands", but at a fraction of the price!

    As a home hobbyist or light fabricator, you don't need to spend more for a "brand name" industrial MIG welder. Our R&D guys developed the Eastwood MIG 135 Welder from scratch to produce excellent bead quality and capabilities that match—and even exceed—the more expensive MIG welders for sale!

    • Welds mild and stainless steel, 24-ga. to 1/4"
    • 25-135-amp welding range
    • Tweco-Style Gun and Consumables
    • Powered by standard 120v household current
    • Ships with regulator and hose for MIG welding. Can also be used for Flux-Core welding.
    • Compare to similar welders that sell for over $500
    • Backed by Eastwood's no-hassle return policy and 3-year warranty. Try it out for 30 days and if you don't like it, return it for a full refund!

    About Eastwood MIG Welder 135 Amp

    MIG 135 welder is designed for the home hobbyist and light fabricator. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 1/4" mild steel and stainless. Welder has a 20% duty cycle at 90 amps, and 25-135-amp welding range. Feeds wire at 39"-468" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, wire, tips and other MIG welding equipment...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration and flawless welds. Backed by Eastwood's no-hassle return policy and a 3-year manufacturer's warranty.

    Click here for warranty information


    Contents

    MIG 135 Welder (57 lbs.)
    0.023" Steel MIG Wire
    Extra 0.023" Contact Tip
    Gas Regulator with hose
    Tweco-Style Gun and Consumables
    Switchable Drive Roller
    8' Ground Cable and Gun Cable
    Wire Brush
    Welding Face Shield
    3-Year “No Hassle” Warranty


    Specs

    Output Amperage Range: 25-135 A
    Maximum Output No Load Voltage: 28 V DC
    Maximum Input Amperage: 20 Amp
    Input Voltage: 120 VAC 60 Hz
    Rated Duty Cycle: 20% @ 90 A
    Wire Feed Rate: 40-450 IPM
    Welding Wire Spool Sizes: 4-8 in
    Weight: 56 Lbs. (25kg)
    Overall Dimensions: 16.5” (408 mm) x 9.6” (244 mm) x 14.5” (367 mm)
    Wire Type & Diameter: Solid 0.023-0.030in (0.6-0.8mm), Stainless 0.023-0.030in (0.6-0.8mm), Flux Cored 0.030-0.035in (0.8-0.9mm)


    Instructions

    Click here for product instructions


    Safety

    Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants.


    Warranty

    Click here for warranty info


    Instructions

    Click here for product instructions


    Welding steel, stainless metals: this unit welds 20- and 18-gauge body panels beautifully. The amperage and output voltage can be controlled precisely to get the proper penetration required. The wire speed can be infinitely adjusted also to gain proper wire fill in the weld pool. This unit has been compared to the leading U.S.-manufactured red welders with equal results at a fraction of the cost. The drive roll mechanism, the heart of any MIG welder, is designed to our specifications and delivers flawless wire feed without skipping or slipping on the wire.


    Accessories & Consumables

    Replacement Parts
    12211 Contact Tip 0.023
    12224 Contact Tip 0.030
    12226 MIG Wire 0.023
    12227 MIG Wire 0.030
    12225 Flux Wire 0.030
    12239 Drive Roller
    12210 Tweco-Style Nozzle

    Accessories
    TIG Welding Cart
    Auto Darkening Welding Helmet
    Welding Jacket
    Large View Auto Darkening Helmet
    Welding Gloves

    Consumables
    Contact Tip, 0.023 Inch
    Contact Tip, .030 Inch
    MIG Wire, 0.023 Inch
    MIG Wire, .030 Inch
    Flux Cored Wire 0.030 Inch
    MIG Nozzle


    Customers also viewed:

    Customer Reviews

    Items 41 to 50 of 157 total

    per page
    great value for the price (Posted on 5/20/13)
    Review by John Cushing
    Quality
    Price
    Value
    I purchased this unit for body patch repairs. I am a mig novice so for my first repair I was concerned with burn thru. I was amazed with the ease of my spot welds and with following fill in, and no burn thru. It is a pro repair, I wish I had this welder years ago.
    great machine (Posted on 5/14/13)
    Review by lacey
    Price
    Value
    Quality
    use this welder all the time , even have my 15 year old daughter welding with it , it a great small welder
    AWESOME!!! (Posted on 5/10/13)
    Review by Jeremy
    Price
    Value
    Quality
    I have welded professionally with both Lincolns and Millers and in my opinion the Eastwood MIG 135 performs just as well as any machine at 2x or 3x the cost... the only thing I wish they would change or at least offer a replacement wire feed mechanism out of metal or thicker plastic I feel wish heavier use it may fail but I'm not too concerned because of the solid 3yr warranty they have.
    Great welder (Posted on 4/29/13)
    Review by Brian
    Price
    Value
    Quality
    Don't be fooled by the price. This is a great value welder. I am on my second 10lb spool in a short time. It has ran it flawlessly. I used Hobart wire the first time with good results but switched to Lincoln wire and it got better. I am currently using flux core wire because I'm welding a lot outside. I would not be afraid to suggest this to a friend. I also have a Lincoln and it welds pretty much the same. I cannot speak for long term life because I've only had it a couple weeks but so far so good.
    better than Eastwood says it is (Posted on 4/23/13)
    Review by rockett
    Value
    Quality
    Price
    this is my first mig welder and i had never welded but a very few times and i found that it is very easy with this welder
    Couldnt ask for more (Posted on 4/15/13)
    Review by Kerry
    Price
    Value
    Quality
    I got my first one and the top handle was broken despite the great packaging. Eastwood didnt even flinch, they just sent me a replacement unit even though I only asked for a new handle. Once I started using it, I found out that this little unit works better than any other welder of comparable size that I have ever used....including miller porta paks. It took me less than 5 minutes to get the feel and the handy chart on the inside cover is nice when you are switching wire or metal so you have a "reminder" of where to start and then adjust from there. I have run 30 lbs of wire thru this since November when I bought it and I love it so much I wont even let me nephews borrow it for fear that I may never get it back again. If they want to use it, it stays in my shop!
    Easiest Welder I have ever used (Posted on 4/14/13)
    Review by Ernesto
    Price
    Value
    Quality
    Got this Eastwood MIG Welder 135 Amp, easy instructions. I haven't welded for over 20 years, but I used this welder for some restoration work on my 54 chevy truck frame and welded with ease, welded first on some scrap steel to get the right voltage and wire speed, after that welded parts of the truck frame and suspension with no issues. Recommend this also to anyone and very portable can take this anywhere for other type of welding projects. It worth the price, better than some other welders I used in the past!
    Great for the price (Posted on 4/9/13)
    Review by Danny
    Price
    Value
    Quality
    The mig 135 works well. It is a pretty good light duty welder. I haven't used it alot yet, but what I have done it did great. I would recomend it to anybody.
    Perfect 110 welder (Posted on 4/4/13)
    Review by Renurb
    Quality
    Price
    Value
    This thing worked awesome out of the box. Im a total noob welder and was laying some nice beads. A friend of mine that is a professional welder came over and told me that he likes it better than his lincoln 140. Super fast shipping, no shipping cost, no tax, and nice product, no brainer
    nice unit (Posted on 3/30/13)
    Review by carlito
    Price
    Value
    Quality
    The unit came in a timly manor. Purchased a bottle of 75 25 argon gas and co2 set the unit up in about 30 minutes and i was welding.i am a novist welder and after getting a few tips from welder friend i,m very saticfied that this unitwill doall my welding needs on trailers, truck floorpan and angle iron to 1/4" stocki have planned. I viewed half dozen welders in the same catagory 110v. 135 amp. Units and i think i got a good deal w/ eastwood brand. Watch forthe salesand free shipping sales and you will be good to go too. !!!

    Items 41 to 50 of 157 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register