Eastwood MIG Welder 135 Amp

    Item #12011 Brand: Eastwood

    Price
    Value
    Quality
    150 Review(s)
    Heavy Item - Special shipping charges may apply.

    Details

    Eastwood's own MIG 135 Welder: as good as the "name brands", but at a fraction of the price!

    As a home hobbyist or light fabricator, you don't need to spend more for a "brand name" industrial MIG welder. Our R&D guys developed the Eastwood MIG 135 Welder from scratch to produce excellent bead quality and capabilities that match—and even exceed—the more expensive MIG welders for sale!

    • Welds mild and stainless steel, 24-ga. to 1/4"
    • 25-135-amp welding range
    • Tweco-Style Gun and Consumables
    • Powered by standard 120v household current
    • Ships with regulator and hose for MIG welding. Can also be used for Flux-Core welding.
    • Compare to similar welders that sell for over $500
    • Backed by Eastwood's no-hassle return policy and 3-year warranty. Try it out for 30 days and if you don't like it, return it for a full refund!

    About Eastwood MIG Welder 135 Amp

    MIG 135 welder is designed for the home hobbyist and light fabricator. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 1/4" mild steel and stainless. Welder has a 20% duty cycle at 90 amps, and 25-135-amp welding range. Feeds wire at 39"-468" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, wire, tips and other MIG welding equipment...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration and flawless welds. Backed by Eastwood's no-hassle return policy and a 3-year manufacturer's warranty.

    Click here for warranty information


    Contents

    MIG 135 Welder (57 lbs.)
    0.023" Steel MIG Wire
    Extra 0.023" Contact Tip
    Gas Regulator with hose
    Tweco-Style Gun and Consumables
    Switchable Drive Roller
    8' Ground Cable and Gun Cable
    Wire Brush
    Welding Face Shield
    3-Year “No Hassle” Warranty


    Specs

    Output Amperage Range: 25-135 A
    Maximum Output No Load Voltage: 28 V DC
    Maximum Input Amperage: 20 Amp
    Input Voltage: 120 VAC 60 Hz
    Rated Duty Cycle: 20% @ 90 A
    Wire Feed Rate: 40-450 IPM
    Welding Wire Spool Sizes: 4-8 in
    Weight: 56 Lbs. (25kg)
    Overall Dimensions: 16.5” (408 mm) x 9.6” (244 mm) x 14.5” (367 mm)
    Wire Type & Diameter: Solid 0.023-0.030in (0.6-0.8mm), Stainless 0.023-0.030in (0.6-0.8mm), Flux Cored 0.030-0.035in (0.8-0.9mm)


    Instructions

    Click here for product instructions


    Safety

    Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants.


    Warranty

    Click here for warranty info


    Instructions

    Click here for product instructions


    Welding steel, stainless metals: this unit welds 20- and 18-gauge body panels beautifully. The amperage and output voltage can be controlled precisely to get the proper penetration required. The wire speed can be infinitely adjusted also to gain proper wire fill in the weld pool. This unit has been compared to the leading U.S.-manufactured red welders with equal results at a fraction of the cost. The drive roll mechanism, the heart of any MIG welder, is designed to our specifications and delivers flawless wire feed without skipping or slipping on the wire.


    Accessories & Consumables

    Replacement Parts
    12211 Contact Tip 0.023
    12224 Contact Tip 0.030
    12226 MIG Wire 0.023
    12227 MIG Wire 0.030
    12225 Flux Wire 0.030
    12239 Drive Roller
    12210 Tweco-Style Nozzle

    Accessories
    TIG Welding Cart
    Auto Darkening Welding Helmet
    Welding Jacket
    Large View Auto Darkening Helmet
    Welding Gloves

    Consumables
    Contact Tip, 0.023 Inch
    Contact Tip, .030 Inch
    MIG Wire, 0.023 Inch
    MIG Wire, .030 Inch
    Flux Cored Wire 0.030 Inch
    MIG Nozzle


    Customers also viewed:

    Customer Reviews

    Items 101 to 110 of 150 total

    per page
    Good Value for Price and Quality (Posted on 12/29/11)
    Review by Martin
    Quality
    Price
    Value
    So far so good! Shopped around and this unit seemed best value for features, quality, price.
    Best features:
    Infinite power & speed controls
    Cable-hose length
    Gas valve & pressure gauge decent quality.
    Amps for 120 volt model.
    I think is is very good value. I never welded B-4.
    Just used this a little so far and I found it very easy to MIG with gas. Welded some decorative coat hooks from horse shoes. I will use it more w/ flux core wire sicne I want to weld thicker steel, but I chose 120 volt model for more portability. I went on YouTube learned basics for welding.

    graet welder!!! (Posted on 12/18/11)
    Review by pops
    Quality
    Price
    Value
    i got this welder several months ago, have had other similar welders but this east wood mig 135 beats them hands down!!! great unit for the money!!! the only thing i do not like about this unit is the fact that it keeps blowing gas about 2 seconds after you let go of the trigger!! which i believe is wasting gas and see no real benefits from it doing this?? any feed back from any one with this same concern would be appreciated!! other than that i have no other complaints about the quality of this unit, great little unit!!!! elmerfurst@gmail.com
    GREAT Welder For The Money! (Posted on 12/10/11)
    Review by Buzzman72
    Price
    Value
    Quality
    Bought my MIG 135 in July, and I've had some time to run it on flux-core wire. I've gotta say I really like the infinitely variable adjustments on BOTH wire speed AND voltage--I don't know of any other welders in this price range with BOTH! My ONLY complaint was that I had to lengthen both control wires about 2" in order to be able to connect them [don't worry, Ma...splices are soldered, and then covered with heat-shrink insulation]. If the control wires had been long enough, I'd have given the welder 5 stars ALL THE WAY !
    WOW (Posted on 12/4/11)
    Review by Phillip
    Price
    Value
    Quality
    I was hesitant on purchasing a 110 volt welder especially for such a low price,I took a shot and WOW was I surprised when I was welding on my Jeep XJ rock crawler,This machine welded 3/16th pipe to 1/4 square tube like nothing. This machine welds so smooth and what a nice bead. Strongly recommend this unit to anyone. Eastwood,you guys are awesome. Thanks,Bud
    Inexpensive quality! (Posted on 11/28/11)
    Review by Frocky
    Quality
    Price
    Value
    I have welded 22ga to 1/8th inch metals with this unit. Thoroughly impressed, infinite adjustments are great. Well built, easy to maintain. Eventually you will want to buy all of your friends this one.
    Great welder (Posted on 11/6/11)
    Review by SPS
    Quality
    Price
    Value
    Bought this welder over a year ago and have loved it ever since. This machine is Built strong enough for daily work..We highly recomnend it to anyone looking for a good welder at a low price.
    Great portable welder for the price !! (Posted on 11/3/11)
    Review by Dan
    Quality
    Price
    Value
    Have a miller200 amp garage welder. Was in need of a portable 120 volt welder for field work for fencing & gate work on site. This machine preforms with excellent output for the short amount of time I have used. Highly recommend for the home projects. East woods staff are always there to help with any questions. Great products & service !!.
    mig 135 UPDATE WITH GAS (Posted on 9/22/11)
    Review by tassue
    Value
    Quality
    Price
    i was finally able to add gas...followed the chart printed inside the door it was a very good starting point ...
    i got pretty good using flux core i could get the dime look beads...but using the gas shield with the suppled wire my welds look fantastic there is no spatter ....welds look beautiful and are holding strong ...i even rate the sound it makes while welding a *5 * ...so far ive welded 1/8 angle iron and sheet metal ...and i have plenty of amps left for the thicker steels ...
    ill tryed to post a weld pic of my flux and gas..
    flux pic has some spatter the gas pic i welded trying different motions just playing around i hope it loads up
    mig 135 (Posted on 8/16/11)
    Review by Tassue
    Price
    Value
    Quality
    i currently used a craftman 80amp flux wire feeder....i went back and forth on a hobart ,lincoln, and this eastwood 135. 30day money back so i gave it a try....the drive system is identical to a 8-10yr old lincoln mig pak...that being said wirefeed was very smooth .....i loaded lincolns innershield flux core(.30)wire to try it out ....WOW it took me a second to tweek the speed and amps ..the chart is good starting point...spatter was way down...starting arc was great ..its very powerful and a quality machine.
    love that the wire is cold until the triggger is pulled
    the quality i gave 4 stars because the door wasnt straight /out of square but worked fine (im anal)...if your on the fence give it a try you will love it!!! going to add gas soon ...welded up a new cart to hold this 1/8 steel w/flux check out the weld..thanks eastwood you mad me and my ($$$wife$$$) happy
    awesome welder (Posted on 8/6/11)
    Review by John
    Price
    Value
    Quality
    Had this welder for a couple days now and have welded with it every day since I got it on everything from sheet metal to roll cage tubing and love it. I am not an expert welder but it is easy to make nice strong welds with this unit. It will weld just as good and almost as fast as my hobart 220 unit at less than half the cost. This is a great welder for around the house projects for beginners and experienced welders alike. My only complaint is that cheesy face mask that comes with it. Expect to buy a good welding helmet to get started but with the money you save on this unit that shouldnt be a problem.

    Items 101 to 110 of 150 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register