Eastwood MIG Welder 135 Amp

    Item #12011 Brand: Eastwood

    150 Review(s)
    Heavy Item - Special shipping charges may apply.


    Eastwood's own MIG 135 Welder: as good as the "name brands", but at a fraction of the price!

    As a home hobbyist or light fabricator, you don't need to spend more for a "brand name" industrial MIG welder. Our R&D guys developed the Eastwood MIG 135 Welder from scratch to produce excellent bead quality and capabilities that match—and even exceed—the more expensive MIG welders for sale!

    • Welds mild and stainless steel, 24-ga. to 1/4"
    • 25-135-amp welding range
    • Tweco-Style Gun and Consumables
    • Powered by standard 120v household current
    • Ships with regulator and hose for MIG welding. Can also be used for Flux-Core welding.
    • Compare to similar welders that sell for over $500
    • Backed by Eastwood's no-hassle return policy and 3-year warranty. Try it out for 30 days and if you don't like it, return it for a full refund!

    About Eastwood MIG Welder 135 Amp

    MIG 135 welder is designed for the home hobbyist and light fabricator. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 1/4" mild steel and stainless. Welder has a 20% duty cycle at 90 amps, and 25-135-amp welding range. Feeds wire at 39"-468" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, wire, tips and other MIG welding equipment...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration and flawless welds. Backed by Eastwood's no-hassle return policy and a 3-year manufacturer's warranty.

    Click here for warranty information


    MIG 135 Welder (57 lbs.)
    0.023" Steel MIG Wire
    Extra 0.023" Contact Tip
    Gas Regulator with hose
    Tweco-Style Gun and Consumables
    Switchable Drive Roller
    8' Ground Cable and Gun Cable
    Wire Brush
    Welding Face Shield
    3-Year “No Hassle” Warranty


    Output Amperage Range: 25-135 A
    Maximum Output No Load Voltage: 28 V DC
    Maximum Input Amperage: 20 Amp
    Input Voltage: 120 VAC 60 Hz
    Rated Duty Cycle: 20% @ 90 A
    Wire Feed Rate: 40-450 IPM
    Welding Wire Spool Sizes: 4-8 in
    Weight: 56 Lbs. (25kg)
    Overall Dimensions: 16.5” (408 mm) x 9.6” (244 mm) x 14.5” (367 mm)
    Wire Type & Diameter: Solid 0.023-0.030in (0.6-0.8mm), Stainless 0.023-0.030in (0.6-0.8mm), Flux Cored 0.030-0.035in (0.8-0.9mm)


    Click here for product instructions


    Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants.


    Click here for warranty info


    Click here for product instructions

    Welding steel, stainless metals: this unit welds 20- and 18-gauge body panels beautifully. The amperage and output voltage can be controlled precisely to get the proper penetration required. The wire speed can be infinitely adjusted also to gain proper wire fill in the weld pool. This unit has been compared to the leading U.S.-manufactured red welders with equal results at a fraction of the cost. The drive roll mechanism, the heart of any MIG welder, is designed to our specifications and delivers flawless wire feed without skipping or slipping on the wire.

    Accessories & Consumables

    Replacement Parts
    12211 Contact Tip 0.023
    12224 Contact Tip 0.030
    12226 MIG Wire 0.023
    12227 MIG Wire 0.030
    12225 Flux Wire 0.030
    12239 Drive Roller
    12210 Tweco-Style Nozzle

    TIG Welding Cart
    Auto Darkening Welding Helmet
    Welding Jacket
    Large View Auto Darkening Helmet
    Welding Gloves

    Contact Tip, 0.023 Inch
    Contact Tip, .030 Inch
    MIG Wire, 0.023 Inch
    MIG Wire, .030 Inch
    Flux Cored Wire 0.030 Inch
    MIG Nozzle

    Customers also viewed:

    Customer Reviews

    Items 11 to 20 of 150 total

    per page
    Perfect for patch panels (Posted on 2/16/14)
    Review by John
    I am an amateur at welding and could not be more pleased with the ease of assembling and using this welder. The instructions were very informative and easy to understand, I was welding within an hour of receiving the welder. A buddy of mine has a Lincoln and they seem identical at 1/2 the price. With the Christmas special and free shipping you cant beat it. Thank you Eastwood,
    Great welder (Posted on 2/15/14)
    Review by Oatman
    Fast shipping and the welder works like a champ!
    135 mig welder (Posted on 2/5/14)
    Review by Gerald
    great little welder I wish I had purchased the 175 but this welder exceeded my expectations I reworked a 1948 ford frame mustang ll IFS and a TCI leaf spring rear assem and fitted a 8.8 Lincoln rear axle with this welder I did all the welding, also repaired all sheet metal patch work buying this welder for the price I paid and free shipping it saved me over 10k did it my self rather then send out to a custom shop
    Nice welder, but cart sucks (Posted on 12/31/13)
    Review by Thomas
    My only disappointment is the cart. The tank blocks the gas intake on the welder and the chains are worthless to hold the gas tank. Also, as other people wrote about, the door on the welder is blocked by the lip on the cart. You have to lift the welder out to open the door. I asked the salesperson if they fixed that problem and the answer was it's fixed. WRONG! The unit is top heavy and you have to be careful when moving the unit. One thing, I now have a welder so I can fab this cart so it will work as it should.
    great buy (Posted on 12/17/13)
    Review by steven
    I researched all mig welders. After reading reviews I settled on this machine the price was just to good to pass up. Free shipping on top of that. I expected to get it in a few weeks but got it delivered in 3 days. Out of the box welded perfect just need to play with heat and speed to fine tune it. I used name brand prior to this and this welder laid a perfect bead. You won't regret the purchase I just wish I would have spent the extra money and got the 175 for more welding options.
    Nice Welder (Posted on 11/29/13)
    Review by Dennis
    I've had this welder for a couple of months now and have used it to fix my John Deere 450 loader form time to time. Used flux core at first, have switched to gas now welds much better. Anyone purchasing one of these I would recommend you get the MIG135 Knurled Drive Roller (Key Way Style) — 14113. The wire slips and jerks with the one supplied, other than that it's a very nice welder for the money
    great value (Posted on 11/17/13)
    Review by Michael
    Out of the box I was welding. For the price you would be crazy not to have this in your shop
    Eastwood MIG Welder 135 Amp experience (Posted on 11/3/13)
    Review by Mario
    I am not a professional welder, but I do repair work on my cars to save a dollares. I have two toyota prius and have previously used the welding machine and tools freight harbor is the difference really is in the evening to the morning.
    The machine Eastwood MIG Welder 135 Amp is fantastic and very good for anyone who is not an expert. I recommend it to everyone. Welding is very good as it appears on the video. If you buy the Eastwood MIG Spot Weld Kit excencial is a great addition for anyone who does body shop.
    No Regrets (Posted on 10/30/13)
    Review by Bob
    Works as advertized, no problems, no glitches. Great Value for home use.
    Good First Welder (Posted on 10/7/13)
    Review by Rob
    Great price when looking around. It was ordered and delivered within the same week - great response. I used the videos to set the unit up and all was well except feeding the wire into the actual welding cable. I had a bit of a challenge getting it setup (it felt like there was a little lip that was causing the wire to hang up - the auto feed wouldn't work). After some trial and error I finally got it setup and I was off and running/welding. I ran some practice beads on an old muffler since I was doing some minor auto body work. That same weekend I had the panels fixed. I recommend getting a welding helmet (holding the hand held face shield and steadying the gun is less than desirable).

    I sent an email the following week about the difficulty in feeding the wire, and haven't heard back from them (it's been two weeks now). I do look forward to a few more projects that aren't so sensitive to heat and feed rate. It should be fun. I think this is a good first welder for almost anyone.

    Items 11 to 20 of 150 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register