Eastwood MIG Welder 135 Amp

    Item #12011 Brand: Eastwood

    Heavy Item - Special shipping charges may apply.

    Details

    Eastwood's own MIG 135 Welder: as good as the "name brands", but at a fraction of the price!

    As a home hobbyist or light fabricator, you don't need to spend more for a "brand name" industrial MIG welder. Our R&D guys developed the Eastwood MIG 135 Welder from scratch to produce excellent bead quality and capabilities that match—and even exceed—the more expensive MIG welders for sale!

    • Welds mild and stainless steel, 24-ga. to 1/4"
    • 25-135-amp welding range
    • Tweco-Style Gun and Consumables
    • Powered by standard 120v household current
    • Ships with regulator and hose for MIG welding. Can also be used for Flux-Core welding.
    • Compare to similar welders that sell for over $500
    • Backed by Eastwood's no-hassle return policy and 3-year warranty. Try it out for 30 days and if you don't like it, return it for a full refund!

    About Eastwood MIG Welder 135 Amp

    MIG 135 welder is designed for the home hobbyist and light fabricator. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 1/4" mild steel and stainless. Welder has a 20% duty cycle at 90 amps, and 25-135-amp welding range. Feeds wire at 39"-468" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, wire, tips and other MIG welding equipment...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration and flawless welds. Backed by Eastwood's no-hassle return policy and a 3-year manufacturer's warranty.

    Click here for warranty information


    Contents

    MIG 135 Welder (57 lbs.)
    0.023" Steel MIG Wire
    Extra 0.023" Contact Tip
    Gas Regulator with hose
    Tweco-Style Gun and Consumables
    Switchable Drive Roller
    8' Ground Cable and Gun Cable
    Wire Brush
    Welding Face Shield
    3-Year “No Hassle” Warranty


    Specs

    Output Amperage Range: 25-135 A
    Maximum Output No Load Voltage: 28 V DC
    Maximum Input Amperage: 20 Amp
    Input Voltage: 120 VAC 60 Hz
    Rated Duty Cycle: 20% @ 90 A
    Wire Feed Rate: 40-450 IPM
    Welding Wire Spool Sizes: 4-8 in
    Weight: 56 Lbs. (25kg)
    Overall Dimensions: 16.5” (408 mm) x 9.6” (244 mm) x 14.5” (367 mm)
    Wire Type & Diameter: Solid 0.023-0.030in (0.6-0.8mm), Stainless 0.023-0.030in (0.6-0.8mm), Flux Cored 0.030-0.035in (0.8-0.9mm)


    Instructions

    Click here for product instructions


    Safety

    Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants.


    Warranty

    Click here for warranty info


    Instructions

    Click here for product instructions


    Welding steel, stainless metals: this unit welds 20- and 18-gauge body panels beautifully. The amperage and output voltage can be controlled precisely to get the proper penetration required. The wire speed can be infinitely adjusted also to gain proper wire fill in the weld pool. This unit has been compared to the leading U.S.-manufactured red welders with equal results at a fraction of the cost. The drive roll mechanism, the heart of any MIG welder, is designed to our specifications and delivers flawless wire feed without skipping or slipping on the wire.


    Accessories & Consumables

    Replacement Parts
    12211 Contact Tip 0.023
    12224 Contact Tip 0.030
    12226 MIG Wire 0.023
    12227 MIG Wire 0.030
    12225 Flux Wire 0.030
    12239 Drive Roller
    12210 Tweco-Style Nozzle

    Accessories
    TIG Welding Cart
    Auto Darkening Welding Helmet
    Welding Jacket
    Large View Auto Darkening Helmet
    Welding Gloves

    Consumables
    Contact Tip, 0.023 Inch
    Contact Tip, .030 Inch
    MIG Wire, 0.023 Inch
    MIG Wire, .030 Inch
    Flux Cored Wire 0.030 Inch
    MIG Nozzle


    Customers also viewed:

    Customer Reviews

    Items 11 to 20 of 172 total

    per page
    Good welder for the price (Posted on 6/18/2014)
    Review by Steve
    Quality
    Price
    Value
    Decided on this welder after comparing to the Lincoln 140 at HD. Half the price and it seems to work well. I am a complete novice and we got the welder to do some floor pan repairs on a 66 VW bug. I'm sure I will get better with practice but the unit is easy to use and predictable. Had a bit of trouble with the 0.023 wire included with the unit. Could not get it to feed smoothly. Eastwood sent me a free spool of higher quality 0.023 wire and things are working well now. My only complaint so far is that it is a little tough to feed the wire into the nozzle on the front side of the little drive wheel. The hold down just wants to keep dropping down. You really need three hands or a helper. The unit is solid and just the right level of power for our needs. Time will tell if this unit holds up over time. The only thing preventing a 5 star on quality is the junky 0.023 wire the unit ships with. Hopefully EW can correct that.
    Great Welder even better Price (Posted on 6/15/2014)
    Review by Larry
    Price
    Value
    Quality
    Welder seem to well built, much better quality than our last welder for the same price. Welds as good as top Name machines.
    Great Welder (Posted on 6/8/2014)
    Review by Marvin
    Price
    Value
    Quality
    I bought the 135 last winter because of the really good price and good reviews. I started setting it up, but it was just too cold to weld in the garage, so it sat. I finally had some welding to do this past week and finished setting it up according to the manual which had very good directions. What a nice machine!! This is my first MIG welder. I have a Lincoln stick and wire welders and have been welding off and on for 50 years. This MIG welder welds soooo nice! I am super pleased with it. Buy one you won't regret it.
    Just what I needed (Posted on 6/2/2014)
    Review by Ken
    Price
    Value
    Quality
    My 30 year old mig regulator broke & I decided to buy this mig to replace it. I wish I had thrown out that old mig long ago. My projects look professional now & it is much easier to use than my old mig. The welds are nicer looking,has less splatter and easier cleanup. Thanks Eastwood!
    Great product (Posted on 5/26/2014)
    Review by ROGER
    Value
    Quality
    Price
    I've been using it for over a year and it has worked very well.
    This is an excellent welder at a great price (Posted on 5/13/2014)
    Review by Matt
    Quality
    Price
    Value
    I just finished taking a mig welding class where I learned on a Millermatic 140 autoset. I used my new Eastwood 135 for the first time yesterday and it was most impressive. Once I got my temp and speed adjusted where I wanted, this welder preformed as well if not better than the Miller I had been using in school. I cant speak to its longevity as I've only got two hours on it at the moment but initially this is an unbeatable welder for the price. I would definitely recommend this welder with a tank of argon/co2 to anyone. I could not be more pleased with it.
    Amazing in all phases (Posted on 5/9/2014)
    Review by Troy
    Price
    Value
    Quality
    I want to preface this by saying that I am not an experienced welder. I've taught myself how to weld almost exclusively using YouTube and tech articles, and the recent Kevin Tetz welding videos in particular. That said, I have a 1967 Mustang that I have been restoring for almost a year now. I had originally bought a $200 MIG from a big chain department store, and it never worked right, no matter what I did, how I tried to set it, or how many "how to" videos I watched.

    I finally gave up and decided to purchase Eastwood's unit instead. First of all, the shipping was amazing. I ordered this on Tuesday, and I had it set up in my garage by Thursday afternoon. And let me tell you, the difference was NIGHT and DAY. You could see the quality right out the box. The instructions weren't written in three different languages, the shield gas hose didn't look as if it would be better suited for an aquarium, the drive motor didn't whine and creak along, and the settings on door were accurate and easy to understand. The second I pulled the trigger, I heard not intermittent pops and sputters as with the other welder on the same settings, but the sweet sound of "bacon frying." Perfect penetration, and no blowthrough. In fact, for all of the money I spent on trying to get the cheap department store MIG to work, I could have bought two of these Eastwood units. My only regret is that I didn't buy it to start with.
    Fast shipping, easy assembly. (Posted on 5/7/2014)
    Review by Bob
    Quality
    Price
    Value
    easy to assemble. The welding results are excellent.
    Awesome and great price (Posted on 4/30/2014)
    Review by James
    Quality
    Price
    Value
    I already have the Eastwood 200amp tig and plasma cutter, the blue ones. I have a Lincoln weldpak I keep set up for flux core, and wanted a small welder with infinite current control. I bought this and have run a spool of wire through it already. A great welder.
    Great buy (Posted on 4/22/2014)
    Review by Terry
    Quality
    Price
    Value
    Very good welder for the price. Only thing is I had a century 105 amp welder and this 135 amp seems just a little more powerful. Wonder if its true 135 amp. Still a great buy either way.

    Items 11 to 20 of 172 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register