Eastwood MIG Welder 135 Amp

    Item #12011 Brand: Eastwood

    156 Review(s)
    Heavy Item - Special shipping charges may apply.


    Eastwood's own MIG 135 Welder: as good as the "name brands", but at a fraction of the price!

    As a home hobbyist or light fabricator, you don't need to spend more for a "brand name" industrial MIG welder. Our R&D guys developed the Eastwood MIG 135 Welder from scratch to produce excellent bead quality and capabilities that match—and even exceed—the more expensive MIG welders for sale!

    • Welds mild and stainless steel, 24-ga. to 1/4"
    • 25-135-amp welding range
    • Tweco-Style Gun and Consumables
    • Powered by standard 120v household current
    • Ships with regulator and hose for MIG welding. Can also be used for Flux-Core welding.
    • Compare to similar welders that sell for over $500
    • Backed by Eastwood's no-hassle return policy and 3-year warranty. Try it out for 30 days and if you don't like it, return it for a full refund!

    About Eastwood MIG Welder 135 Amp

    MIG 135 welder is designed for the home hobbyist and light fabricator. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 1/4" mild steel and stainless. Welder has a 20% duty cycle at 90 amps, and 25-135-amp welding range. Feeds wire at 39"-468" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, wire, tips and other MIG welding equipment...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration and flawless welds. Backed by Eastwood's no-hassle return policy and a 3-year manufacturer's warranty.

    Click here for warranty information


    MIG 135 Welder (57 lbs.)
    0.023" Steel MIG Wire
    Extra 0.023" Contact Tip
    Gas Regulator with hose
    Tweco-Style Gun and Consumables
    Switchable Drive Roller
    8' Ground Cable and Gun Cable
    Wire Brush
    Welding Face Shield
    3-Year “No Hassle” Warranty


    Output Amperage Range: 25-135 A
    Maximum Output No Load Voltage: 28 V DC
    Maximum Input Amperage: 20 Amp
    Input Voltage: 120 VAC 60 Hz
    Rated Duty Cycle: 20% @ 90 A
    Wire Feed Rate: 40-450 IPM
    Welding Wire Spool Sizes: 4-8 in
    Weight: 56 Lbs. (25kg)
    Overall Dimensions: 16.5” (408 mm) x 9.6” (244 mm) x 14.5” (367 mm)
    Wire Type & Diameter: Solid 0.023-0.030in (0.6-0.8mm), Stainless 0.023-0.030in (0.6-0.8mm), Flux Cored 0.030-0.035in (0.8-0.9mm)


    Click here for product instructions


    Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants.


    Click here for warranty info


    Click here for product instructions

    Welding steel, stainless metals: this unit welds 20- and 18-gauge body panels beautifully. The amperage and output voltage can be controlled precisely to get the proper penetration required. The wire speed can be infinitely adjusted also to gain proper wire fill in the weld pool. This unit has been compared to the leading U.S.-manufactured red welders with equal results at a fraction of the cost. The drive roll mechanism, the heart of any MIG welder, is designed to our specifications and delivers flawless wire feed without skipping or slipping on the wire.

    Accessories & Consumables

    Replacement Parts
    12211 Contact Tip 0.023
    12224 Contact Tip 0.030
    12226 MIG Wire 0.023
    12227 MIG Wire 0.030
    12225 Flux Wire 0.030
    12239 Drive Roller
    12210 Tweco-Style Nozzle

    TIG Welding Cart
    Auto Darkening Welding Helmet
    Welding Jacket
    Large View Auto Darkening Helmet
    Welding Gloves

    Contact Tip, 0.023 Inch
    Contact Tip, .030 Inch
    MIG Wire, 0.023 Inch
    MIG Wire, .030 Inch
    Flux Cored Wire 0.030 Inch
    MIG Nozzle

    Customers also viewed:

    Customer Reviews

    Items 71 to 80 of 156 total

    per page
    Unhappy customer (Posted on 11/25/12)
    Review by Charles
    Welder will not feed. Wire feed opening in unit competely off center. Hose opening where the wire feeds does not come close to being in line with the feed hole in the unit. Will be returning and not looking to replaceng this Eastwood welder. Quality control has opportunities for improvement.
    Great value (Posted on 11/20/12)
    Review by jeffy
    just received my new 135 mig today, and I must say I was impressed. I weld everyday for a living, and restore Mopar muscle for a hobby, I was looking for a small welder for my shop, and was a little apprehensive on buying a welder in this price category. After setting it up I put it through the paces, and I was more then impressed, this welder is way nicer then I expected! With a little practice anyone can weld with this welder, easy controls, and great penetration , welds as good, or better then some of the more expensive welders I have used!
    Easy setup, good value (Posted on 11/12/12)
    Review by goochman134
    Just like most of the reviews said, this unit is easy to set up and a very good bang for the buck. One minor note: if you use this outside, the plastic face plate on the control panel will warp in a couple of hours. Again, very minor but seemed kind of cheap.
    Good for most jobs, not for spot welding (Posted on 11/10/12)
    Review by DrStang
    I purchased this Eastwood MIG based on it's very positive reviews. I am a novice welder and figured this would be a good start up unit. I added gas to the unit and here is my review.

    PROS: You get a lot for you money ($299) compared to other units (Lincoln, Hobart)

    The instructions are complete and easy to follow.

    The unit lays down a good bead and does well on autobody sheet metal.

    CONS: Despite purchasing the Eastwood spot welding kit, The MIG 135 doesn't cut it. I spent a good 2 hours manipulating the controls trying to get a spot weld. I DID drill a 3/16 pilot hole in the facing metal. The weld looked and sounded great, lots of penetration, but no adhesion. My best guess was that the unit does not have the power to combine the metals (16G)

    Also, I replaced the supplied solid core wire with a thicker Lincoln spool. The Lincoln spool does not match up to the Eastwood axle. I had to use a homemade spacer to get it to work.

    Summary: I would still buy this unit again, IF I didn't need to do any spot welding.
    Great Welder! Awesome Value! (Posted on 11/9/12)
    Review by Corey
    Ordered my welder and it arrived at my doorstep in 2 days! Works great compared to my old unit. I would recommend this to anyone. Now I can finish my restorations without having to fiddle with my old unit.
    Excellent Welder (Posted on 10/10/12)
    Review by New welder
    I finally used the MIG 135 I ordered last winter, and it is awesome. I don't really have any experience welding, but I am looking forward to gaining some now. I tried it with flux-core, now am looking forward to trying it with gas.
    Awesome (Posted on 9/30/12)
    Review by Just getting started.
    I bought the 135 last winter, and I am now just getting started using it. Bought a cheap cheap and decided to put the welder to use. It works great. I have used just flux-core so far, but I am looking forward to buying a bottle and getting started on my mustang. I have never really welded before and this thing is great.
    Stellar (Posted on 9/6/12)
    Review by Cyle
    My friends flaked with their tools so i ordered this AWESOME welder. It came with a small spool of wire. Be sure that you read the instructions and set it up correctly or you will end up like the very few people who gave this a bad review and cant seem to get the welder to work for them. Those are the same guys who get lost and refuse to ask for directions. I got a large spool of wire and a tank of gas and set it up as directed and i was able to make beautiful beads. Now i am nearly 40 and i learned to weld in High school so that was long ago. And i haven't touched one sense. My goal was to build a entry level race car. It turned out great and this tool was a key piece of my success. Currently the car i built is second fastest in its class.
    Excellent welder! (Posted on 9/4/12)
    Review by XCELR8
    Bought the 135 to work on my 66 Mustang restoration. Has been about 10 yrs since I welded and was a bit nervous. I plugged it in, ran a few test beads, and was off working on the car. This machine brought back my confidence. Never used flux wire, went right to gas. Set-up was super easy and the machine operates perfectly. Only complaint I have is length of the power cord. My car is on jack stands and the cord isn't long enough to move around and still have it plugged in. I had to make my own 15' 8ga extension cord (which I was told by an EW tech was ok) and it works fine. Don't pass this by. Eastwood hit a home run with this one!
    Good value for the price. (Posted on 9/4/12)
    Review by zoomer10h
    Recieved my 135 Mig faster then expected!
    Was in a hurry to set it up and get it going as I had to leave town and my son needed that night.
    Set up was a no brainer, very easy and quick.
    Welder showed up in a very well package box with no damage.
    When I plugged unit it, it would not go on, as in no power to anything. No fuse/breaker problem, not an issue on my end (checked all outlets for AC).
    Called and emailed Eastwood, email would not go through, and no live person on the phone and no clall back to date. As I had to get this up and going, pulled the cover off and found on of the main wires to the switch had come dislodged in shipping. Plugged it in and away we went. WORKED awsume! better then expected. Alittle hicup in the beginning, but a great machine for the value!

    Items 71 to 80 of 156 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register