Eastwood MIG Welder 135 Amp

Item #12011 Brand: Eastwood

Quality
Price
Value

120 Review(s)

FREE SHIPPING on this item.This offer ends soon!

Details

Eastwood's own MIG 135 Welder: as good as the "name brands", but at a fraction of the price!

As a home hobbyist or light fabricator, you don't need to spend more for a "brand name" industrial MIG welder. Our R&D guys developed the Eastwood MIG 135 Welder from scratch to produce excellent bead quality and capabilities that match—and even exceed—the more expensive competition!

Welds mild and stainless steel, 24-ga. to 1/4"
25-135-amp welding range
Powered by standard 120v household current
Compare to similar welders that sell for over $500
Backed by Eastwood's no-hassle return policy and 3-year warranty

Get this MIG 135 Welder PLUS our Plasma Cutter and SAVE BIG! Click here!

About Eastwood MIG Welder 135 Amp

MIG 135 welder is designed for the home hobbyist and light fabricator. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 1/4" mild steel and stainless. Welder has a 20% duty cycle at 90 amps, and 25-135-amp welding range. Feeds wire at 39"-468" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, wire, tips and accessories...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration. Backed by Eastwood's no-hassle return policy and a 3-year manufacturer's warranty.

Click here for warranty information

MIG 135 Welder (57 lbs.)
0.023" Steel MIG Wire
Extra 0.023" Contact Tip
Gas Regulator with hose
Tweco-Style Gun and Consumables
Switchable Drive Roller
8' Ground Cable and Gun Cable
Wire Brush
Welding Face Shield
3-Year “No Hassle” Warranty

Output Amperage Range: 25-135 A
Maximum Output No Load Voltage: 28 V DC
Maximum Input Amperage: 20 Amp
Input Voltage: 120 VAC 60 Hz
Rated Duty Cycle: 20% @ 90 A
Wire Feed Rate: 40-450 IPM
Welding Wire Spool Sizes: 4-8 in
Weight: 56 Lbs. (25kg)
Overall Dimensions: 16.5” (408 mm) x 9.6” (244 mm) x 14.5” (367 mm)
Wire Type & Diameter: Solid 0.023-0.030in (0.6-0.8mm), Stainless 0.023-0.030in (0.6-0.8mm), Flux Cored 0.030-0.035in (0.8-0.9mm)

Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants.

Click here for warranty info

Click here for product instructions

Welding steel, stainless metals: this unit welds 20- and 18-gauge body panels beautifully. The amperage and output voltage can be controlled precisely to get the proper penetration required. The wire speed can be infinitely adjusted also to gain proper wire fill in the weld pool. This unit has been compared to the leading U.S.-manufactured red welders with equal results at a fraction of the cost. The drive roll mechanism, the heart of any MIG welder, is designed to our specifications and delivers flawless wire feed without skipping or slipping on the wire.

Replacement Parts
12211 Contact Tip 0.023
12224 Contact Tip 0.030
12226 MIG Wire 0.023
12227 MIG Wire 0.030
12225 Flux Wire 0.030
12239 Drive Roller
12210 Tweco-Style Nozzle

Accessories
TIG Welding Cart
Auto Darkening Welding Helmet
Welding Jacket
Large View Auto Darkening Helmet
Welding Gloves

Consumables
Contact Tip, 0.023 Inch
Contact Tip, .030 Inch
MIG Wire, 0.023 Inch
MIG Wire, .030 Inch
Flux Cored Wire 0.030 Inch
MIG Nozzle

Customer Reviews

Awesome (Posted on 9/30/12) Review by Just getting started.

Price
Value
Quality

I bought the 135 last winter, and I am now just getting started using it. Bought a cheap cheap and decided to put the welder to use. It works great. I have used just flux-core so far, but I am looking forward to buying a bottle and getting started on my mustang. I have never really welded before and this thing is great.

Stellar (Posted on 9/6/12) Review by Cyle

Price
Value
Quality

My friends flaked with their tools so i ordered this AWESOME welder. It came with a small spool of wire. Be sure that you read the instructions and set it up correctly or you will end up like the very few people who gave this a bad review and cant seem to get the welder to work for them. Those are the same guys who get lost and refuse to ask for directions. I got a large spool of wire and a tank of gas and set it up as directed and i was able to make beautiful beads. Now i am nearly 40 and i learned to weld in High school so that was long ago. And i haven't touched one sense. My goal was to build a entry level race car. It turned out great and this tool was a key piece of my success. Currently the car i built is second fastest in its class.

Excellent welder! (Posted on 9/4/12) Review by XCELR8

Price
Value
Quality

Bought the 135 to work on my 66 Mustang restoration. Has been about 10 yrs since I welded and was a bit nervous. I plugged it in, ran a few test beads, and was off working on the car. This machine brought back my confidence. Never used flux wire, went right to gas. Set-up was super easy and the machine operates perfectly. Only complaint I have is length of the power cord. My car is on jack stands and the cord isn't long enough to move around and still have it plugged in. I had to make my own 15' 8ga extension cord (which I was told by an EW tech was ok) and it works fine. Don't pass this by. Eastwood hit a home run with this one!

Good value for the price. (Posted on 9/4/12) Review by zoomer10h

Price
Value
Quality

Recieved my 135 Mig faster then expected!
Was in a hurry to set it up and get it going as I had to leave town and my son needed that night.
Set up was a no brainer, very easy and quick.
Welder showed up in a very well package box with no damage.
When I plugged unit it, it would not go on, as in no power to anything. No fuse/breaker problem, not an issue on my end (checked all outlets for AC).
Called and emailed Eastwood, email would not go through, and no live person on the phone and no clall back to date. As I had to get this up and going, pulled the cover off and found on of the main wires to the switch had come dislodged in shipping. Plugged it in and away we went. WORKED awsume! better then expected. Alittle hicup in the beginning, but a great machine for the value!

very unhappy (Posted on 8/14/12) Review by chevelle guy

Price
Value
Quality

Just got the welder reviewed the dvd and booklet everything setup easy and nothing was missing but the welder does not work! It will not feed wire the roller does not work and it made a funny noise when I first plugged it in. I have to say I'm shocked that it is not working a very angry another weekend wasted now I have to go through the hassel of repacking it and returning it this sucks!

Great product (Posted on 8/14/12) Review by Bastien

Price
Value
Quality

I wasnt sur when I order The Eastwood Mig135 welder but as soon that I receive it I was very happy it work great, the box was in good shape and no damage to the machine. I had a lincoln before and nothing to be a shame of the Eastwood product is GREAT and work great to. I enjoy getting my old Chovrolet Sylverado in shape whit it once it's done all send picture of my pickup.

great value (Posted on 8/2/12) Review by homer

Price
Value
Quality

just got my new welder and so far im very happy makes a novice welder like myself look good and was only using flux core wire cant wait until i get a bottle for it. thanks eastwood

Major bang for your buck! (Posted on 7/25/12) Review by Carlos

Price
Value
Quality

I was a little skeptical bought this badboy last year, I figured it was priced too low, but My brother owns a lincoln 140 and a miller matic and ther is no difference in weld quality whatsoever, The accessories like the gun and regulator are a little cheap Ive returned them already with no hassles and got replacments, but the machine itself you cannot go wrong, I did a frame off restoration on my 1958 plymouth , I replaced the floors , trunk floor inner/outer rocker panles and much more ,welded her all up with this little machine, will lay down strong welds, beautiful beads the metal around it will break before the welds do if your experienced or have some practice, will weld 18 guage sheetmetal all day long, welds thicker stuff easily as well,easy to use. again if your on a budget like myself you cannot go wrong you arent getting any less welder than a hobart or licoln for the price,mine is still in my garage kicking butt!

NICE WELDER FOR THE PRICE (Posted on 7/19/12) Review by RAYJAY

Price
Value
Quality

RECEIVED MY 135 ABOOUT A WEEK AGO. EASTWOOD HAS GREAT PACKAGING. 5 MIN. AFTER UNBOXING WENT RIGHT TO WORK. SO FAR I HAVE WELDED 24 GAUGE SHEET METAL UP TO 3/16 IN. PLATE. WELDER WORKS FLAWLESSLY. GREAT SUBSTUTE FOR MY OLD HOBART HANDLER 135. CAN'T BEAT THE PRICE FOR THE CAPABILITIES OF THIS MACHINE.

The best welder for 300$ (Posted on 7/5/12) Review by John

Quality
Price
Value

I bought this welder about a month ago and as soon as I got it I tried it building a meat smoker. It just works great. The sheet metal I was using was pretty thin and I could really pin point the right amount of heat and wire speed to get a very good looking and strong weld.

Two weeks ago I replaced my rusted out fenders on my car and it also worked really well. I'm very satisfied with the adjustment, portability. The only thing that "broke" so far is the thin plastic cover where the labels are. I left the welder in my car for 2-3 hours and I guess it was too hot, the label warped, but no biggie, still 100% satisfied with the welding part.