Eastwood MIG Welder 135 Amp

    Item #12011 Brand: Eastwood

    Quality
    Price
    Value
    150 Review(s)
    Heavy Item - Special shipping charges may apply.

    Details

    Eastwood's own MIG 135 Welder: as good as the "name brands", but at a fraction of the price!

    As a home hobbyist or light fabricator, you don't need to spend more for a "brand name" industrial MIG welder. Our R&D guys developed the Eastwood MIG 135 Welder from scratch to produce excellent bead quality and capabilities that match—and even exceed—the more expensive MIG welders for sale!

    • Welds mild and stainless steel, 24-ga. to 1/4"
    • 25-135-amp welding range
    • Tweco-Style Gun and Consumables
    • Powered by standard 120v household current
    • Ships with regulator and hose for MIG welding. Can also be used for Flux-Core welding.
    • Compare to similar welders that sell for over $500
    • Backed by Eastwood's no-hassle return policy and 3-year warranty. Try it out for 30 days and if you don't like it, return it for a full refund!

    About Eastwood MIG Welder 135 Amp

    MIG 135 welder is designed for the home hobbyist and light fabricator. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 1/4" mild steel and stainless. Welder has a 20% duty cycle at 90 amps, and 25-135-amp welding range. Feeds wire at 39"-468" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, wire, tips and other MIG welding equipment...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration and flawless welds. Backed by Eastwood's no-hassle return policy and a 3-year manufacturer's warranty.

    Click here for warranty information


    Contents

    MIG 135 Welder (57 lbs.)
    0.023" Steel MIG Wire
    Extra 0.023" Contact Tip
    Gas Regulator with hose
    Tweco-Style Gun and Consumables
    Switchable Drive Roller
    8' Ground Cable and Gun Cable
    Wire Brush
    Welding Face Shield
    3-Year “No Hassle” Warranty


    Specs

    Output Amperage Range: 25-135 A
    Maximum Output No Load Voltage: 28 V DC
    Maximum Input Amperage: 20 Amp
    Input Voltage: 120 VAC 60 Hz
    Rated Duty Cycle: 20% @ 90 A
    Wire Feed Rate: 40-450 IPM
    Welding Wire Spool Sizes: 4-8 in
    Weight: 56 Lbs. (25kg)
    Overall Dimensions: 16.5” (408 mm) x 9.6” (244 mm) x 14.5” (367 mm)
    Wire Type & Diameter: Solid 0.023-0.030in (0.6-0.8mm), Stainless 0.023-0.030in (0.6-0.8mm), Flux Cored 0.030-0.035in (0.8-0.9mm)


    Instructions

    Click here for product instructions


    Safety

    Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants.


    Warranty

    Click here for warranty info


    Instructions

    Click here for product instructions


    Welding steel, stainless metals: this unit welds 20- and 18-gauge body panels beautifully. The amperage and output voltage can be controlled precisely to get the proper penetration required. The wire speed can be infinitely adjusted also to gain proper wire fill in the weld pool. This unit has been compared to the leading U.S.-manufactured red welders with equal results at a fraction of the cost. The drive roll mechanism, the heart of any MIG welder, is designed to our specifications and delivers flawless wire feed without skipping or slipping on the wire.


    Accessories & Consumables

    Replacement Parts
    12211 Contact Tip 0.023
    12224 Contact Tip 0.030
    12226 MIG Wire 0.023
    12227 MIG Wire 0.030
    12225 Flux Wire 0.030
    12239 Drive Roller
    12210 Tweco-Style Nozzle

    Accessories
    TIG Welding Cart
    Auto Darkening Welding Helmet
    Welding Jacket
    Large View Auto Darkening Helmet
    Welding Gloves

    Consumables
    Contact Tip, 0.023 Inch
    Contact Tip, .030 Inch
    MIG Wire, 0.023 Inch
    MIG Wire, .030 Inch
    Flux Cored Wire 0.030 Inch
    MIG Nozzle


    Customers also viewed:

    Customer Reviews

    Items 61 to 70 of 150 total

    per page
    awesome!!!!!!!!!!!!!! (Posted on 12/15/12)
    Review by firechicken
    Quality
    Price
    Value
    I'm crazy happy. this welder is perfect for everything I need it to do. Welded in new floor pans in my firebird and ramp racks on my car hauler. went from very thin to heavy gauge steel with the turn of a dial. Hard to believe the same machine from Lincoln or Miller is over $800.00. So far I've been happy with everything I bought from Eastwood. Thanks guys!!!!!!!!!!!!
    QUALITY COULD USE SOME WORK. (Posted on 12/10/12)
    Review by Tim
    Quality
    Price
    Value
    BOUGHT MY 135 IN JULY. USED THE SUPPLIED SPOOL OF WIRE. MACHINE STOP FEEDING WIRE, THOUGHT I RAN OUT OF WIRE.COME TO FIND OUT THE UPPER PART OF THE WIRE FEED DRIVE BROKE (ALL MADE OF PLASTIC). CALLED EASTWOOD FOR 2 DAYS AND KEPT GETTING AN ANSWERING SERVICE AND NEVER GOTA CALL BACK FINALLY ON DAY 3 GOT A ANSWER FROM A PERSON. THE HELPER WAS GREAT HELP. SENT OUT A REPALCEMENT PART. TOOK A WEEK AND HALF TO GET TO ME. SENT THE WRONG PART. ON DAY 3 NOW OF TRYING TO GET A HOLD OF SOMEONE TO CORRECT THE PROBLEM. THAT ROCKER ARM FOR DRIVE FEED IS ONE PART THAT SHOULD STEEL. EASTWOOD SHOULD MAKE AN UPDATED PART TIN STEEL.
    Great Price (Posted on 12/9/12)
    Review by Naspc
    Quality
    Price
    Value
    Haven't used the welder yet so I will only review the over look, feel of the welder and price. I got this welder on sale for 279.99 with free shipping. Shipping was quick, then again I live in NJ and Eastwood is in PA. The box it came in was pretty sturdy. Very Heavy, usually a good indication of quality. Well packed for something that big. When I got the welder out I was pretty impressed. The welder is designed very well, the case is a thick material not cheap flimsy metal. with the lifted side panel open it will show how clean inside the machine is, no cluttering or sloppy wiring. Hope to use it soon.
    Works well, Component quality lacking. (Posted on 11/25/12)
    Review by Ed
    Price
    Value
    Quality
    This welder works very well for light duty welding. Bought it last year but just started really using it on my 66 Biscayne project. Last week the outer sheath of the nozzle fell off. It didn't come unscrewed, it separated from the brass threaded fitting, fell off, and will not stay on. Eastwood's customer support is sending me a new nozzle. I hooked it up to argon/CO-2 and welded away. It worked great even though I hadn't welded in 40 years. Today while welding a quarter panel in place I noticed my fresh cylinder was low, according to the gauge on the regulator. On closer inspection the needle on the gauge on the regulated side was all the way around to the stop. I checked the hose connection with soapy water to see if it was leaking and it wasn't, but something was leaking and I had lost almost a full cylinder of gas before I discovered it. The regulator is obviously defective. I'll tell Eastwood and I know they will replace it. They treat their customers very well. Thanks Eastwood. Oh and aside from the issues listed here the machine Works great.
    Unhappy customer (Posted on 11/25/12)
    Review by Charles
    Price
    Value
    Quality
    Welder will not feed. Wire feed opening in unit competely off center. Hose opening where the wire feeds does not come close to being in line with the feed hole in the unit. Will be returning and not looking to replaceng this Eastwood welder. Quality control has opportunities for improvement.
    Great value (Posted on 11/20/12)
    Review by jeffy
    Quality
    Price
    Value
    just received my new 135 mig today, and I must say I was impressed. I weld everyday for a living, and restore Mopar muscle for a hobby, I was looking for a small welder for my shop, and was a little apprehensive on buying a welder in this price category. After setting it up I put it through the paces, and I was more then impressed, this welder is way nicer then I expected! With a little practice anyone can weld with this welder, easy controls, and great penetration , welds as good, or better then some of the more expensive welders I have used!
    Easy setup, good value (Posted on 11/12/12)
    Review by goochman134
    Quality
    Price
    Value
    Just like most of the reviews said, this unit is easy to set up and a very good bang for the buck. One minor note: if you use this outside, the plastic face plate on the control panel will warp in a couple of hours. Again, very minor but seemed kind of cheap.
    Good for most jobs, not for spot welding (Posted on 11/10/12)
    Review by DrStang
    Quality
    Price
    Value
    I purchased this Eastwood MIG based on it's very positive reviews. I am a novice welder and figured this would be a good start up unit. I added gas to the unit and here is my review.

    PROS: You get a lot for you money ($299) compared to other units (Lincoln, Hobart)

    The instructions are complete and easy to follow.

    The unit lays down a good bead and does well on autobody sheet metal.

    CONS: Despite purchasing the Eastwood spot welding kit, The MIG 135 doesn't cut it. I spent a good 2 hours manipulating the controls trying to get a spot weld. I DID drill a 3/16 pilot hole in the facing metal. The weld looked and sounded great, lots of penetration, but no adhesion. My best guess was that the unit does not have the power to combine the metals (16G)

    Also, I replaced the supplied solid core wire with a thicker Lincoln spool. The Lincoln spool does not match up to the Eastwood axle. I had to use a homemade spacer to get it to work.

    Summary: I would still buy this unit again, IF I didn't need to do any spot welding.
    Great Welder! Awesome Value! (Posted on 11/9/12)
    Review by Corey
    Quality
    Price
    Value
    Ordered my welder and it arrived at my doorstep in 2 days! Works great compared to my old unit. I would recommend this to anyone. Now I can finish my restorations without having to fiddle with my old unit.
    Excellent Welder (Posted on 10/10/12)
    Review by New welder
    Quality
    Price
    Value
    I finally used the MIG 135 I ordered last winter, and it is awesome. I don't really have any experience welding, but I am looking forward to gaining some now. I tried it with flux-core, now am looking forward to trying it with gas.

    Items 61 to 70 of 150 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register