Eastwood MIG Welder 175 Amp with Spool Gun

    Item #12012 Brand: Eastwood

    Heavy Item-Special shipping charges may apply.

    Details

    Eastwood's MIG 175 Welder: "high-end" features at a DIY price! As a professional or weekend enthusiast, you can now get industrial-quality features in a hard-workin', affordable, MIG welder! Our R&D guys designed the Eastwood MIG 175 Welder (12012) for steel and aluminum to produce excellent bead quality and capabilities that match—and even exceed—the more expensive other MIG welders for sale!

    • Welds mild and stainless steel, 24-ga. to 5/16"
    • Welds aluminum, 14-ga. to 1/4" with included FREE spool gun ($199.99 value!)
    • 30-175-amp welding range
    • Ships with regulator and hose for optimum MIG welding. Can also be used for Flux-Core welding.
    • Powered by 220v current
    • Compare to similar welders that sell for over $700
    • ETL Approved
    • Backed by Eastwood's no-hassle return policy and 3-year warranty. Try it out for 30 days and if you don't like it, return it for a full refund!

    About Eastwood MIG Welder 175 Amp with Spool Gun

    MIG 175 welder is designed for the professional or weekend enthusiast. The welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 5/16" mild steel and stainless, plus 14-ga. to 1/4" aluminum. This high-quality MIG welding machine has a 30% duty cycle at 135 amps, and 30-175-amp welding range. Feeds wire at 58"-471" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, spool gun (to weld aluminum, 19-gauge to 1/4" plate), wire, tips and accessories...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration. Backed by Eastwood's no-hassle return policy and a 3-year manufacturer's warranty.


    Contents

    MIG 175 Welder (89 lbs.)
    Spool Gun with 9' cable (works with 2-lb. wire spools only)
    MIG Wire 0.030
    Aluminum Wire 0.030
    Gas Regulator with hose
    8' Ground Clamp
    8' Gun Cable
    3-Year “No Hassle” Warranty


    Specs

    Rated Electrical Input: 210-240 VAC; 50-60Hz; 22AMP
    Max Voltage at No Load: 20 V DC
    Rated Duty Cycle: 130A@30% duty cycle
    Wire Feed Rate: 4.9 Ft/min – 39.3 Ft/min
    Wire Sizes: 0.025”(0.6mm) – 0.030”(0.8mm) mig wire or 0.030”(0.8mm) – 0.035” Flux core wire
    Welding Wire Spool: 4” and 8” spool
    Weight: 62.0Lbs (24.5kg)
    Overall Dimensions: 24.4 (620mm) x 12.6” (320mm) x 16.9 (430mm)


    Instructions

    Click here for product instructions


    Safety

    Always wear a minimum #10 shade helmet, leather welding gloves and long sleeve shirt and long pants.


    Warranty

    3-year manufacturer's warranty.

    Click here for warranty information


    Instructions

    Click here for product instructions



    Amperage and output voltage can be controlled precisely to get the proper penetration required. Wire speed can be infinitely adjusted to gain proper wire fill in the weld pool. This unit has been compared to the leading U.S.-manufactured red welders, with equivalent results at a fraction of the cost. The drive roll mechanism which is the heart of any MIG welder is designed to our specifications and delivers flawless wire feed without skipping or slipping on the wire.


    Accessories & Consumables

    Consumables:

    12211 Contact Tip 0.023
    12224 Contact Tip 0.030
    12226 MIG Wire 0.023
    12227 MIG Wire 0.030
    12225 Flux Wire 0.030
    12239 Drive Roller
    12210 Tweco-Style Nozzle

    Accessories:

    Welding Cart
    Auto Darkening Welding Helmet
    Welding Jacket
    Large View Auto Darkening Helmet
    Welding Gloves


    Customers also viewed:

    Customer Reviews

    Items 51 to 60 of 108 total

    per page
    Best deal ever (Posted on 2/9/2013)
    Review by Skweldingfab
    Value
    Quality
    Price
    This is the best welder I've used in this size I've used miller and Lincoln and thy don't even compare
    Makes good welds (Posted on 1/31/2013)
    Review by beebe
    Price
    Value
    Quality
    What matters is the welder makes good welds. It's easy to use, and so far it has been reliable. The downside is the cart is flimsy and poorly designed. If I could go back I would buy the welder alone and then use it to build a good cart. The welder has an overall feel of low quality. Like the rubber isn't as strong/thick, some other parts just aren't up to par with the miller/lincoln welders. But I have used miller and lincoln welders and it is just as easy to use and makes just as good or better welds. For the price it is UNBEATABLE. Trust me I did a lot of research. The spool gun has the same cheap feel but it works great for fixing my aluminum sprinkler pipe and I have had no problems so far (it takes some practice to weld aluminum though). Great overall I would and have recommended to others and they also agree. Gets fairly heavy use on a 500 acre farm and no real problems so far after two years. The price with spool gun is amazing. It uses same disposable parts as lincoln mig welder I believe (they have the parts at local hardware stores.) I never write reviews but thought I would cause this was a great buy.
    excellent value (Posted on 12/15/2012)
    Review by Bruski 288
    Quality
    Price
    Value
    Ran beads with gas and flux core.Plenty of penetration on lower settings.Great value considering free delivery and the spool gun!!!!
    Great Machine (Posted on 12/8/2012)
    Review by Ray
    Quality
    Price
    Value
    I recently purchased an Eastwood 175 Amp Mig Welder with spool gun this product has met and exceeded my expectations I'm just learning to weld from the guy's I work with.They were impressed, I let three certified welders use my welder they were surprised at how smooth it worked and that the settings for metal thickness and wire speed were so close they needed no fine tuning.

    Thanks Eastwood
    Great Bang For Your Buck (Posted on 11/22/2012)
    Review by Turftech welder
    Quality
    Price
    Value
    I needed to upgrade from my Lincoln Weld-pak 110v welder. I looked at many machines, and it came down to either Hobart or Eastwood. The free shipping, spool gun infinite heat control and 3 yr warranty convinced me to pull the trigger on the Eastwood.
    To my surprise the welder showed up 3 days later, Fed Exed to my door.
    I ran a 2lb spool of .023 wire and about 1lb of .030 welding a wide range of materials and thicknesses the first day. This machine did great, you may have to tinker/fine tune your settings, especially on thinner material, but that is where the infinite controls really shine. I have now built a HD welding cart, that holds both my welders, a 200 CU ft bottle, and a 125 CU ft bottle, and a go-kart. I have yet to have a single hick-up or problem. This welder kicks my 110v Lincoln's butt!
    This is not a Miller 211, or a higher end Hobart, like the 230 Ironman, but it is a great machine that has performed as well as any brand name 175/180 mig I have used.
    Good job Eastwood!
    Nice welder!!! (Posted on 11/21/2012)
    Review by Big Bopper 1959
    Quality
    Price
    Value
    I've owned this welder for about six months and love it. I used to manage a Fab shop and was a certified pipe welder for years and this welder stacks right up with the name brand industry leaders except for the fact that the Eastwood MIG 175 is affordable.
    You can dial this unit in so it sings and lays a perfect bead. It is a joy to use, I'm glad I purchased it.
    Best Bang for the Buck (Posted on 11/18/2012)
    Review by Weldguy
    Quality
    Price
    Value
    Great little welder for all types of around the house and farm repairs or projects.
    The no hassle replacement warranty works fantastically. Pickup and replacement ship to the front door. Great welder for the money.
    Best Bang for the Buck (Posted on 11/16/2012)
    Review by RedZ
    Quality
    Price
    Value
    Purchased welder not initially for automotive use, but rather to weld 3/16 steel on a custom made fence. I began project in one of my friends commercial welding shops using his big Lincoln machine--he retired before I finished leaving me without a welder. So far, I have used 10 small rolls of wire and half way through a large roll, two bottles of argon mix--and all I can say is this welder is awesome. When compared to my friends commercial welder, I couldn't notice any difference on 3/16 steel, if anything, I think the striker trigger was more controllable on the Eastwood. The instructions that come with the unit--and the videos set the standard for all tool manufacturers--they are top-notch and simple to follow. If I had any complaints; the first isn't related to Eastwood, but rather the shipper--the box is kind of heavy and they smashed two units--Eastwood sent out new ones right away--the last one they only broke a door hinge and Eastwood sent me out an entire new door (great customer service). My last desire is that the striker hose was longer--maybe 10-12 foot long instead of the 8 foot. I have yet to use the spool gun, but I keep looking around the shop for something aluminum to break so I can try it out. All in all, this welder performs just like the big boys, but as it is equipped, costs half the price, and has better warranty.
    Excellent weldere (Posted on 11/7/2012)
    Review by Dano
    Quality
    Price
    Value
    I have had this welder for several months. It does everything I have asked it to do and then some. No complaints. Great welder.
    Needs some improvement (Posted on 10/15/2012)
    Review by Walt
    Quality
    Price
    Value
    welder is not to bad but it has problems feeding the wire. the first one i got had a hard spot on the wire feed it would slip when it got to a spot on the wheel,eastwood replaced it,the one i have now doesn't feed well at low wire speeds

    Items 51 to 60 of 108 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register