Eastwood Meteor Gray Metallic Paint 96 OZ

    Item #50283ZP

    Quality
    Price
    Value
    2 Review(s)

    Details

    Eastwood Meteor Gray Metallic is a premium acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, requires 21856ZP activator.

    About Eastwood Meteor Gray Metallic Paint 96 OZ

    EW Meteor Gray Metallic is a premium acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, requires 21856ZP activator.


    Contents

    96 Fl. Oz.


    Accessories

    21856 ZP activator required. 50250 ZP Urethane Clear and 50251 ZP Activator 50240 ZP Urethane primer and 50241 ZP Activator 50040ZP THRU 50042ZP PAINT PREP KITS 12454Z Block sanding kit, 12252 3-gun set 20472 Air managemnet system 51550 Concourse HVLP Gun


    Safety

    Always wear appropriate eye, skin and breathing protection. Consult MSDS for specific safety instructions


    Warranty

    Made in USA


    Application

    Clean surfaces of all contaminents. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesions. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator Use caution mixing materials as paint may begin to gel after 2 hours at 70Ö. HVLP gun setting 8-10psi 1.4-1.8mm tip. Eastwood paint is designed to give complete coverage in 2 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours


    Customer Reviews

    2 Item(s)

    per page
    wow,just a little more (Posted on 4/16/13)
    Review by Mike
    Price
    Value
    Quality
    I had a problem spraying this color on my 59 belair, I purchased 2 gallons for the jambs and body, this color is rough to spray , a lot of separation going on for the color and metallic, this color is real tricky to get right, well I guess its time to sand the whole car again, I wish your gallons were truegallons because if they were my car would have been done,
    color seperation (Posted on 12/31/11)
    Review by David
    Quality
    Price
    Value
    this paint sprays good but I keep getting color seperation in the paint on the vehicle.I'm using all eastwood prep for this paint before spraying.This is the second gallon of the same color that has done this.I've not had any problem with other colors just this one....Time to sand again.I've got one more gallon to try and if it does it this time I'll have to change the color of the vehicle.This is getting expensive.

    2 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register