Eastwood Internal Frame Coating w/Spray Nozzle

    Item #12515Z

    Details

    Internal Frame Coating is a quality rust inhibitor that destroys rust hiding inside the chassis, so it doesn’t rust its way through

    You spend time and money restoring a chassis...but what about all that rust inside the frame? Use our Internal Frame Coating to make your chassis rust-free throughout!
    • Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface
    • Zinc phosphate seals it to prevent future corrosion
    • 24"-long tube with conical nozzle reaches in to spray coating in a radial pattern for complete coverage
    • Covers 10 sq. ft. per can
    • Fully cures in 24 hours


    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

    About Eastwood Internal Frame Coating w/Spray Nozzle

    Internal frame coating is formulated to convert and encapsulate the rust INSIDE your frame. Our formulation also incorporates zinc phosphate to further protect the metal from future corrosion. The viscosity is stabilized to assure proper flow and penetration to the existing corrosion and will yield complete coverage when sprayed with the included "conical nozzle". Easy to use and perfect for rust proofing, this must-have product is aerosolized to simply spray the entire inside of the frame with the supplied extension tube and "conical nozzle" for complete coverage and elimination of the rust for years of protection.

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Contents

    Internal Frame Coating w/Spray Nozzle, 14-oz. aerosol


    Specs

    Application

    Use included extension tube and conical nozzle, and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck.


    FAQ’s

    Top coating can be done after 24 hour cure Can be used as a primer on external metal surfaces


    Safety

    always wear protective eye, face and hand protection when applying


    Warranty

    made in USA 1 year warranty


    Application

    Use included extension tube and conical nozzle and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. 2 cans are required for a subrame vehicle and 3 cans for a full frame vehicle. Note: truck frame will require 3 cans 1 can covers 10 sq ft.


    Customers also viewed:

    Customer Reviews

    Items 41 to 50 of 105 total

    per page
    This is a good product (Posted on 11/11/2012)
    Review by Ernie
    Quality
    Price
    Value
    The nozzle worked well for reaching tough areas. I highly recommend wearing gloves and old cloths. This does make a mess. I had trouble with one can but Eastwood replaced it. I would recommend this and would purchase again.
    Thank You,
    Great for Rustproofing Rocker panels on Pickups!! (Posted on 11/10/2012)
    Review by Justin S
    Quality
    Price
    Value
    Used it to keep the rockers from rusting out on my Silverado. The salt they use seems to eat them up on the other trucks I have seen, The 2ft tube works great to get into the long extended cab rockers! Just don't lay under the truck while doing it! It leaks out of the water holes onto you, Ask me how I know!
    Not bad (Posted on 10/15/2012)
    Review by DevilDog
    Quality
    Price
    Value
    I do recommend this product. make sure you plug up open holes in the frame or tape them up, and if you dont want it to get on the floor i recommend putting some kind of drop cloth down. I used 4 cans on my 88 dodge raider frame, could of used 2 more. No way would 2 cans do a frame properly. I wish the price was a little cheaper though!
    Good when on sale (Posted on 10/1/2012)
    Review by sixtharmy
    Price
    Value
    Quality
    Liked the idea of this product, but found $20 + $5 shipping to be a bit steep. Checked back periodically until it went on sale for $15 and signed up for emails to get free ship on order. One can coated interior of frame horns and rocker panels on my subcompact. Applied easily. Spray nozzle works well. Covered ground to avoid leakage stain. Odor in car went away after 3-4 days. I'll give it a few years and see how well it stops rust.
    Great Product (Posted on 7/17/2012)
    Review by PatG
    Price
    Value
    Quality
    Just used this product last weekend. Worked as promised. Drilled access holes to a boxed section of my car body, taped tube to a steel rod, and fed tube/rod deep into car body cavity. Sprayed out great through tube with spray end fitting. Thickens rapidly and only dripped out a bit. Flashlight shows great coverage. Very happy with product.
    Chevy stepside sealing areas from rusting (Posted on 7/7/2012)
    Review by Smitty
    Quality
    Price
    Value
    This is a great product I have used many cans on all panels where it is impossible to get to like cab corners, rockers, frame, doors seams and in between fender walls. Some tips are - remove the tube and nozzle after spraying and soak in a container of lacquer thinner I'm still using the first tube, another is insert a long piece of MIG wire inside the tube and you will be able to direct the tube easier, the can end is easy to remove. One last thing mark the tube as to eliminate spraying allover as you remove the tube! Great product atomizes the spray soaks in like water drys quickly, but only time will yield the results!
    Pretty good, unique product (Posted on 3/24/2012)
    Review by Jim
    Price
    Value
    Quality
    Overall, I was happy with the Internal Frame Coating. It seemed to stick well and cut through the embedded dirt on the surface on the internal frame portions I used it on (as much as I could tell anyway) I would say to watch out, as this stuff is very (almost too) runny. If you are underneath the car trying to do this, you will get it all over you. It was a little pricey though. I would like to see them lower this $15.99. It would seem more of a value then- Just my opinion.
    Good product but doesn't cover much area (Posted on 3/15/2012)
    Review by Matt B
    Price
    Value
    Quality
    This stuff seems to stick very well to rusted area and the nozzle works as described. I expect that the reults will last a very long time. My only complaint is that you do have to use a good amount to get full coverage and therefore the can does not last very long. Great product but one can won't get you far.
    Good stuff/bad mess after (Posted on 1/30/2012)
    Review by Donny
    Quality
    Price
    Value
    This stuff appears to work great. Only problem though is its pretty watery (thin) and gets all over the place. I had just as much on my hands as I did on the frame LOL. I highly recommend painters gloves.
    pretty slick (Posted on 12/4/2011)
    Review by 69 Stingray
    Price
    Value
    Quality
    This stuff was pretty easy to apply. As others have mentioned, make sure to mask off all holes not being used to insert the tube. Otherwise, you'll have the green paint all over your driveway/garage floor. Just used it today so I can't speak to the longevity of the product. I'll check back in a year to let you know how it performs.

    Items 41 to 50 of 105 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register