Eastwood Internal Frame Coating w/Spray Nozzle

    Item #12515Z

    Quality
    Price
    Value
    100 Review(s)

    Details

    Internal Frame Coating is a quality rust inhibitor that destroys rust hiding inside the chassis, so it doesn’t rust its way through

    You spend time and money restoring a chassis...but what about all that rust inside the frame? Use our Internal Frame Coating to make your chassis rust-free throughout!
    • Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface
    • Zinc phosphate seals it to prevent future corrosion
    • 24"-long tube with conical nozzle reaches in to spray coating in a radial pattern for complete coverage
    • Covers 10 sq. ft. per can
    • Fully cures in 24 hours


    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

    About Eastwood Internal Frame Coating w/Spray Nozzle

    Internal frame coating is formulated to convert and encapsulate the rust INSIDE your frame. Our formulation also incorporates zinc phosphate to further protect the metal from future corrosion. The viscosity is stabilized to assure proper flow and penetration to the existing corrosion and will yield complete coverage when sprayed with the included "conical nozzle". Easy to use and perfect for rust proofing, this must-have product is aerosolized to simply spray the entire inside of the frame with the supplied extension tube and "conical nozzle" for complete coverage and elimination of the rust for years of protection.

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Contents

    Internal Frame Coating w/Spray Nozzle, 14-oz. aerosol


    Specs

    Application

    Use included extension tube and conical nozzle, and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck.


    FAQ’s

    Top coating can be done after 24 hour cure Can be used as a primer on external metal surfaces


    Safety

    always wear protective eye, face and hand protection when applying


    Warranty

    made in USA 1 year warranty


    Application

    Use included extension tube and conical nozzle and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. 2 cans are required for a subrame vehicle and 3 cans for a full frame vehicle. Note: truck frame will require 3 cans 1 can covers 10 sq ft.


    Customers also viewed:

    Customer Reviews

    Items 51 to 60 of 100 total

    per page
    Good studf (Posted on 9/10/11)
    Review by Geo Dude
    Value
    Quality
    Price
    Can't speak for the rust proofing abilities yet, but the nozzle and long tube make for excellent coverage of impossible to reach areas. Application to the rocker panels and wheel wells for my Geo took about a can and a half for one side, and I am confident I hit every nook and cranny.

    EastWoods constant badgering for reviews and more purchases is a bit annoying though. If the product works we will come back for more. Simple enoug.
    Great product (Posted on 9/6/11)
    Review by High Crest 1
    Value
    Quality
    Price
    Used it to treat a fully boxed and x'ed street rod frame. Material worked as described and the hose and spray nozzle worked better than expected. Price seems right for the product when considering the accompanying spray tube and nozzle. Once I got the feel for spray coverage I was able to manage the entire frame and support box tubing with by 4 can order. Time will tell if the product lives up to it's advertising but judging from test pieces expose to weather it should be as good as claimed. I will be ordering more for other projects.
    Excellent product ++++++ (Posted on 9/3/11)
    Review by Big Dog
    Value
    Quality
    Price
    The internal frame coating goes on easly with the spray nozzle,giving entire area a exellent coating of paint.Great hard finish that will last a long time..I use the spray nozzle with other Eastwood rust coatings to get the hard to reach spots..THANX
    I hate this stuff (Posted on 8/17/11)
    Review by jdawg9696
    Price
    Value
    Quality
    I used this stuff and I thought it was crap... I sprayed it light for the first 2 coats then started to cover heavier.. So I sprayed it on good and it flacked and rusted through... I'll spend more and buy the rust encapulator it's worth it... Atleast it never rusted...
    Works well! (Posted on 8/5/11)
    Review by Mojo
    Price
    Value
    Quality
    This stuff does the trick! The nozzle coats 360 degrees as advertised. The coating is very low viscosity and sets up slowly so it permeates into cracks and crevices as needed. Hint: Use a red marker to put a mark around the tube about an inch from the nozzle. This will help you to know where the nozzle is as you pull the tube and nozzle back towards the opening. This will prevent the surprise of pulling the nozzle out while still spraying. It took 2 cans to do a fully boxed frame on my 29 Chevy.
    great product (Posted on 7/14/11)
    Review by joey
    Price
    Value
    Quality
    I ordered this spray on monday it arrived on wednesday, fast shipping indeed.

    I used this spray to coat inside my 98 ranger's rocker panels and boxed forward frame areas. I ordered two cans and managed to get two completely saturated coats on both the rockers and frame. The nozzle worked great for me, no failures and the spray pattern was very good.

    The only thing to note is that you may want to either tape off the areas your coating or have some paint thinner on hand because this stuff is sticky. It will get everywhere if there is a breeze.

    Can't speak for it's rustproofing yet but it does get into every nook and cranny, and I'm sure it will hold up just fine. Highly recommend.
    Capturing the nozzle (Posted on 7/10/11)
    Review by turbo140
    Price
    Value
    Quality
    "Gluing" the nozzle to the flexible tube may or may not work. You will find out when it comes off in a non-accessible location. Use safety wire or equivalent to physically secure the nozzle to the tube.
    no other product like it. (Posted on 6/24/11)
    Review by Jay
    Price
    Value
    Quality
    this stuffs great. I wish I found it years ago. I used it to pray the inside of my vw bug tunnel like in the pics.
    another great eastwood product keep giving us more guys thanks
    Great Stuff! (Posted on 6/18/11)
    Review by Jim
    Price
    Value
    Quality
    We used this to seal any remaining rust on the inside of a Miata rocker panel (not enough to justify a new panel), and it worked perfect. I won't know how well for several years, but will only know if rust comes back. So we'll look at it as "no news is good news". The product was great, and definitely made the difference in getting to otherwise impossible to reach spaces.
    Great Product That Covers Very Well!!! (Posted on 5/29/11)
    Review by Mark
    Value
    Quality
    Price
    I had always wanted to use this product on my older Celica daily driver, since rust-through always seems to be an issue with Toyotas. I bought two cans of it & was able to get all main areas I wanted to coat (rockers & rear rails). I knew the product was doing its job once it began seeping out of all the access holes.

    Now that I've been able to see how well it works on my daily driver, I plan on purchasing a plug kit & carefully masking off the frame on my Challenger project & getting everything protected on the inside...Not getting any seepage will be the key, though, since it's already been painted & cleared underneath.

    Items 51 to 60 of 100 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register