Eastwood Internal Frame Coating w/Spray Nozzle

    Item #12515Z

    Details

    Internal Frame Coating is a quality rust inhibitor that destroys rust hiding inside the chassis, so it doesn’t rust its way through

    You spend time and money restoring a chassis...but what about all that rust inside the frame? Use our Internal Frame Coating to make your chassis rust-free throughout!
    • Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface
    • Zinc phosphate seals it to prevent future corrosion
    • 24"-long tube with conical nozzle reaches in to spray coating in a radial pattern for complete coverage
    • Covers 10 sq. ft. per can
    • Fully cures in 24 hours

    About Eastwood Internal Frame Coating w/Spray Nozzle

    Internal frame coating is formulated to convert and encapsulate the rust INSIDE your frame. Our formulation also incorporates zinc phosphate to further protect the metal from future corrosion. The viscosity is stabilized to assure proper flow and penetration to the existing corrosion and will yield complete coverage when sprayed with the included "conical nozzle". Easy to use and perfect for rust proofing, this must-have product is aerosolized to simply spray the entire inside of the frame with the supplied extension tube and "conical nozzle" for complete coverage and elimination of the rust for years of protection.


    Contents

    Internal Frame Coating w/Spray Nozzle, 14-oz. aerosol


    Specs

    Application

    Use included extension tube and conical nozzle, and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck.


    FAQ’s

    Top coating can be done after 24 hour cure Can be used as a primer on external metal surfaces


    Safety

    always wear protective eye, face and hand protection when applying


    Warranty

    made in USA 1 year warranty


    Application

    Use included extension tube and conical nozzle and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. 2 cans are required for a subrame vehicle and 3 cans for a full frame vehicle. Note: truck frame will require 3 cans 1 can covers 10 sq ft.


    Customers also viewed:

    Customer Reviews

    Items 61 to 70 of 105 total

    per page
    great product (Posted on 7/14/2011)
    Review by joey
    Price
    Value
    Quality
    I ordered this spray on monday it arrived on wednesday, fast shipping indeed.

    I used this spray to coat inside my 98 ranger's rocker panels and boxed forward frame areas. I ordered two cans and managed to get two completely saturated coats on both the rockers and frame. The nozzle worked great for me, no failures and the spray pattern was very good.

    The only thing to note is that you may want to either tape off the areas your coating or have some paint thinner on hand because this stuff is sticky. It will get everywhere if there is a breeze.

    Can't speak for it's rustproofing yet but it does get into every nook and cranny, and I'm sure it will hold up just fine. Highly recommend.
    Capturing the nozzle (Posted on 7/10/2011)
    Review by turbo140
    Price
    Value
    Quality
    "Gluing" the nozzle to the flexible tube may or may not work. You will find out when it comes off in a non-accessible location. Use safety wire or equivalent to physically secure the nozzle to the tube.
    no other product like it. (Posted on 6/24/2011)
    Review by Jay
    Price
    Value
    Quality
    this stuffs great. I wish I found it years ago. I used it to pray the inside of my vw bug tunnel like in the pics.
    another great eastwood product keep giving us more guys thanks
    Great Stuff! (Posted on 6/18/2011)
    Review by Jim
    Price
    Value
    Quality
    We used this to seal any remaining rust on the inside of a Miata rocker panel (not enough to justify a new panel), and it worked perfect. I won't know how well for several years, but will only know if rust comes back. So we'll look at it as "no news is good news". The product was great, and definitely made the difference in getting to otherwise impossible to reach spaces.
    Great Product That Covers Very Well!!! (Posted on 5/29/2011)
    Review by Mark
    Value
    Quality
    Price
    I had always wanted to use this product on my older Celica daily driver, since rust-through always seems to be an issue with Toyotas. I bought two cans of it & was able to get all main areas I wanted to coat (rockers & rear rails). I knew the product was doing its job once it began seeping out of all the access holes.

    Now that I've been able to see how well it works on my daily driver, I plan on purchasing a plug kit & carefully masking off the frame on my Challenger project & getting everything protected on the inside...Not getting any seepage will be the key, though, since it's already been painted & cleared underneath.
    3-4 cans for early Mustang (Posted on 5/5/2011)
    Review by 65 fastback
    Value
    Quality
    Price
    I just wanted to add my input for the product. I happened to be lucky enough when Eastwood was running a special offer on the product so I picked up 4 cans for my 65 Mustang 2+2.

    I used a little over three full cans. After coating the front and rear sub frame sections I used the product to coat anywhere I thought would be appropriate including rocker panels, a pillar panels, boxed in sections of roof toward outer edge and generally any boxed in area that had some rust already forming. It was easy to use and I didn't have to worry too much about over spraying and runnoff due to a drop cloth and have my car on a rotisserie in full restoration mode. I am hoping this will make the car hold together another 40 years.

    To be honest though whether or not the product works, I think one of the best things is the applicator nozzle/hose/diffuser tip. I had no issues with mine falling off, and actually only used one of the 4 that I got. Just used a little PRE to clean out the innside and outside and I still have 4 for whatever else I need it for.
    GOOD STUFF! (Posted on 4/30/2011)
    Review by STANLEY
    Value
    Quality
    Price
    I normally sandblast & powder coat all my rusty parts, but what do you do when the car body & frame are rusty them selves?

    I bought 2 cans of the internal frame coating. This stuff works great! This stuff goes a long way, it covered way more than I thought 2 cans would. Used them in my 99 Infiniti G20 which is a huge rust bucket. Sprayed down tons of the unibody frame rails up front, along the sides ect. With the extension nozzle I did not have to disassemble the car what so ever, I was able to snake it in different holes.

    This stuff is messy (as it should be with any good product). Wear rubber gloves , long sleeves or painters tyvek overalls & safety glassed. This will make a mess on your garage floor as it drips out of the different passages of the frame. I was able to clean out the nozzle & tube with a can of brake cleaner, I did not have any prep solvent or pre around.

    Over all a good deal for the price of 19.99 but could be a little cheaper for maximum value, or come in one of the large cans like chassis Kleen.
    Great Product (Posted on 4/10/2011)
    Review by Dale
    Value
    Quality
    Price
    This is a great product and I have used it twice now. The only problem is the price. If it wasn't so pricey I would buy more. It is good for more than just internal frames. I use it anywhere I can not reach to paint. I coated the inside of the vent cowls by the kick panels, the inside of the floor pan supports, the inside of the door seals, doors, and quarter windows, and the inside of the roof supports and sail panels. It is great stuff but does not go very far and is a too expensive.
    Good stuff, bad price. (Posted on 4/4/2011)
    Review by justin
    Quality
    Price
    Value
    This stuf was very easy to use, and the nozle will fit through a 3/16 hole so you can get it just about everywhere within your frame very simply. It flows very well, albiet a bit messily at times, and seems to cover very well inside the frame. It took 4 cans to do the inside of my TR6 frame. The only problem I have with the stuff is the outrageously expensive cost. A TR6 is a tiny car, and it takes 4 cans, I'd hate to do anything larger just from the pain it would give my wallet !
    good but the price is too high (Posted on 3/27/2011)
    Review by Michael
    Quality
    Price
    Value
    great product, get some super glue prior to glue the nozzle on. It works as advertised. VERY IMPORTANT: prep and cover all holes or you will end up with green coating over everything. Prep is key. Also if it is not a frame off, use a power washer, vacuum or whatever you can to get the crap out of your frame it will work better. Eastwood should give a price break on this stuff as you don't get a lot and it goes VERY fast. Overall I am happy but the cost is hight

    Items 61 to 70 of 105 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register