Details
Internal Frame Coating destroys rust hiding inside the chassis, so it doesn’t rust its way through
You spend time and money restoring a chassis...but what about all that rust inside the frame? Use our Internal Frame Coating to make your chassis rust-free throughout!
You spend time and money restoring a chassis...but what about all that rust inside the frame? Use our Internal Frame Coating to make your chassis rust-free throughout!
- Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface
- Zinc phosphate seals it to prevent future corrosion
- 24"-long tube with conical nozzle reaches in to spray coating in a radial pattern for complete coverage
- Covers 10 sq. ft. per can
- Fully cures in 24 hours
Rust Remover - Eastwood Gel Rust DissolverStarting at: $19.99 |
Eastwood Chassis Kleen 18 oz Aerosol
Only
$6.99
|
Eastwood Rust ConverterStarting at: $12.99 |
See this product in action!
About Eastwood Internal Frame Coating w/Spray Nozzle
Use our Internal Frame Coating to make your chassis rust-free throughout! Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface, and zinc phosphate seals it to prevent future corrosion. Penetrates under the heaviest surface rust. If not treated, the metal surface will continue to rust and begin to show as paint flaking, pin holes or even worse—structural frame failure.
14-oz. aerosol can includes an 24"-long extension tube with conical nozzle that reaches in to apply the coating in a radial spray pattern for complete coverage. Insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck. Fully cures in 24 hours. Made in the USA.
Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.
Internal Frame Coating w/Spray Nozzle, 14-oz. aerosol
Application
Use included extension tube and conical nozzle, and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck.
Use included extension tube and conical nozzle, and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck.
(Q) When can I top-coat over it?
(A) Top coating can be done after the 24-hour cure. Can be used as a primer on external metal surfaces.
(A) Top coating can be done after the 24-hour cure. Can be used as a primer on external metal surfaces.
Always wear protective eye, face and hand protection when applying.
1-year mfr's. warranty against defects.
Customer Reviews
-
Good but....
(Posted on 9/15/10)
Review by HokieJoe -
very easy to use, but I have a fully boxed frame on a 1970 GM A body convertible. I used two cans, and easily need two or even three more. I inspected the inside with a light and a mirror, and did notice places with uneven coverage. I also wondered why Eastwood didn't just put Rust Encapsulator in a can with a spray wand. The wand works great, and I thought RE was supposed to be the ultimate rust treatment. Just wondering.Value Quality Price -
Should be good with a little innovation.
(Posted on 9/2/10)
Review by Beerstalker -
I am doing all the unibody channels on a '73 Cougar convertible. The rockers are 75" long- too long to reach with an 18' wand, and I use the term wand loosely- it's like a limp noodle. I put two of the tubing sections together with a small piece of brass tubing- it looks kike a piece uf brake tubing would work. I taped them to a 4' long 1/4" rod. Insert the rod, and start spraying as you slowly remove the rod. Also, cover all the access holes with transparent tape--you'll be able to see coverage without making a mess.Value Quality Price -
great product
(Posted on 8/30/10)
Review by RP -
Finally here is a product that finishes the job when you are removing rust from a frame. This product has excellent coating and can get in to all the tight places. I recommend this product highly.Value Quality Price -
Works Great
(Posted on 8/28/10)
Review by Mike -
I bought 2 cans to do the inside of my '67 Camaro Sub-frame. Works great, covered good. I highly recommend watching the Video first. I had no problems. I think secret is to shake very well, and move as fast as possible. And shake again whenever possible. I am very pleased with ease, and coverage. Only time will tell as for longevity. Great Product!Value Quality Price -
Great product - works well, but have a suggestion
(Posted on 8/25/10)
Review by Dave -
I bought three cans of the Internal Frame Coating to use on the boxed areas of my 69 GTO convertible... I probably should have bought four though.Value Quality Price
It was very easy to use and seemed to cover the visible areas fairly well.
You definitely need eye protection though as it will spray out through any holes as you move the tube.
The only issue I had was that trying to "snake" the plastic tube into the frame sometimes didn't always work as expected because it kinked up...so I'm not sure I covered all surfaces completely. That may be part of the reason I used three cans and really should have had four.
I think that if the tube was just a little more rigid, it would work better. Also, as another user posted, it would be better if it was black. Unless you don't care about the ugly greenish yellow color, you'll need to paint over it through the holes in the frame etc.
However, I am very confident it will work well just like all the other Eastwood products I've purchased. -
great product ,rom to improve
(Posted on 8/22/10)
Review by rdfrmn53 -
Piled 200' 1" rope hauled from saltwater & let it sit in back of 4 runner 12hrs. Stupidest of stuoid .Value Quality Price
This product wil enable me to minimize damage as "96 truck @ 123000 w/ many left .
Would like to see longer wand . -
Great product
(Posted on 8/20/10)
Review by Tef -
This is a great product, easy to use and to clean up, I used it on my chevelle frame that I am doing ground up restoration on and it solved the problem of how to protect the area's that the body shop didn't cover. Thanks guy's at Eastwood!Value Quality Price -
loved it, well thought out
(Posted on 8/19/10)
Review by Eric in NH -
I just used 2 cans on my '99 Pathfinders uni-body frame. seems to really work well at coating and creeping into the frame. I am hoping it helps stave off the dreaded frame rot, time will tell. The new nozzle with the built on hose really worked awesome for me. I think I will order maybe one or two more cans, just to be sure I have it all SUPER coated as I do already have some surface rust starting. better safe than sorry, and a few cans sure beats uni-body repair later down the road! I think this is WELL worth trying,I have always had great luck with other products from eastwood and have no reason to think this wont work great. Thanks!Value Quality Price -
Great Product
(Posted on 8/15/10)
Review by hernac -
I used 4 cans on my 62 Sprite to spray box sections/sills. Very easy to use and had no clogging problems with nozzles.Value Quality Price
Gret Product! -
good product
(Posted on 8/10/10)
Review by bullyboy -
I used this in the rocker panels on my 65 VW squareback. No access from anywhere but the trim holes, so just poked the hose in and sprayed everywhere up and down the rocker. I tried it out in a pop bottle and it coated everywhere pretty well so I think it should coat inside the rockers easily.Value Quality Price
Great idea!
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|