Eastwood Internal Frame Coating w/Spray Nozzle

    Item #12515Z

    Quality
    Price
    Value
    100 Review(s)

    Details

    Internal Frame Coating is a quality rust inhibitor that destroys rust hiding inside the chassis, so it doesn’t rust its way through

    You spend time and money restoring a chassis...but what about all that rust inside the frame? Use our Internal Frame Coating to make your chassis rust-free throughout!
    • Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface
    • Zinc phosphate seals it to prevent future corrosion
    • 24"-long tube with conical nozzle reaches in to spray coating in a radial pattern for complete coverage
    • Covers 10 sq. ft. per can
    • Fully cures in 24 hours


    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

    About Eastwood Internal Frame Coating w/Spray Nozzle

    Internal frame coating is formulated to convert and encapsulate the rust INSIDE your frame. Our formulation also incorporates zinc phosphate to further protect the metal from future corrosion. The viscosity is stabilized to assure proper flow and penetration to the existing corrosion and will yield complete coverage when sprayed with the included "conical nozzle". Easy to use and perfect for rust proofing, this must-have product is aerosolized to simply spray the entire inside of the frame with the supplied extension tube and "conical nozzle" for complete coverage and elimination of the rust for years of protection.

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Contents

    Internal Frame Coating w/Spray Nozzle, 14-oz. aerosol


    Specs

    Application

    Use included extension tube and conical nozzle, and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck.


    FAQ’s

    Top coating can be done after 24 hour cure Can be used as a primer on external metal surfaces


    Safety

    always wear protective eye, face and hand protection when applying


    Warranty

    made in USA 1 year warranty


    Application

    Use included extension tube and conical nozzle and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. 2 cans are required for a subrame vehicle and 3 cans for a full frame vehicle. Note: truck frame will require 3 cans 1 can covers 10 sq ft.


    Customers also viewed:

    Customer Reviews

    Items 11 to 20 of 100 total

    per page
    Excellent product. (Posted on 12/15/13)
    Review by Ed
    Quality
    Price
    Value
    Years ago I worked for Warn Industries. They built government products under contract. Those contracts required specific "primers" as well as special top coats. This product looks and acts like that 'primer'. Excellent product. Occasionally I've gotten a defective can, no product would dispense. A couple good hints: 1.Insert a small diameter welding wire into the supplied plastic extension tube to help direct the spray better. 2. Put drop cloths under what you are coating. 3. Plug holes or tape over them to keep the product from running out.
    product fulills three roles (Posted on 12/9/13)
    Review by Conley
    Quality
    Price
    Value
    I use this product for many other painting and prevention jobs. I have done some long term testing in harsh MN salt environment. Also have done some research on the make-up of the product. It seems to take the place of three other items that I was using. In the past I would typically use a rust converter on light rust and then a zinc based paint and then sealer of some sort. This product takes care of all three steps and thus far has held up extremely well. It has very good penetrating properties and the zinc based paint/sealer is very tough. I have several jobs out that have seen some tough duty and this coating is very impressive.
    Owner of JanFab LLC fabrication shop.
    Great product, but buy 2 so you have 1 good nozzle assembly to use. (Posted on 11/30/13)
    Review by Jamie
    Quality
    Price
    Value
    Excellent product. Reminds me of Zink Chromate primer used on air craft. The only bad thing about this product is make sure you buy 2 cans...as one of the 2 sets of spray nozzles will be loose and the super glue fix recommended in the instructions is a waste of time. When I swapped over to the good nozzle tube assembly, it worked great. I used it in my frame rails and in the roof structure and 1/4 window areas of my 66 Mustang.
    Hoping To Head Off The Inevitable (Posted on 11/19/13)
    Review by David
    Quality
    Price
    Value
    Bought a couple cans to coat the rockers and bed support channels of a used '05 pickup. Tubes did not want to cooperate as they kept wanting to recoil and hang up in the panels.
    I found a heavy wire coat hanger, trimmed it to length and added a small 2" bend to one end. I wrapped painters tape as tight as I could to hold the tubing just behind the nozzle to the wire. This allowed me to get further into the rockers and I was able to twist the nozzle while spraying. I know I saturated things pretty well as the drips were falling from the rocker drains onto my paint tarp.
    I do know this is coating is not flexible after it dries as I can bend the tarp and it will crack. We'll see how it goes!
    Does a great job! (Posted on 11/13/13)
    Review by Kyrie
    Quality
    Price
    Value
    Used this to seal up my rocker panels and frames when repairing severe rust in the underbody. Nozzle was great for getting everywhere I needed. It is thin, but it does "creep" into tiny gaps and out through tight seams. Perfect for what I needed
    only time will tell (Posted on 11/7/13)
    Review by William
    Quality
    Price
    Value
    The product was featured in Hot VW's Magazine as a method of treating a very ignored area in VW restoration. It covered well, the spray nozzle performed beautifully. Now if the product does as its portrayed. My car will be in good shape. Also very useful for any inaccessible nook or cranny. My plan is to order a few more cans. The product goes fast. Doesnt take be a few seconds and you've emptied the can. Personally I have never purchased anything from Eastwood that I wasnt very satisfied with.
    Great Product (Posted on 10/10/13)
    Review by Dave
    Quality
    Price
    Value
    I used it to seal the rocker panels on my restoration. I also used it for the frame. The coat goes on nicely and thanks to the Extension hose make it great for those hard to reach areas. In some cases wish the hose was a little longer. But Highly recommended.
    Internal Frame Coating does an excellant job (Posted on 10/4/13)
    Review by Dave
    Price
    Value
    Quality
    This internal frame coating was used to coat inaccessible areas of a toolbox. There are hat sections that support the drawer slides. Rust was visible but allowed no access for rust removal so I coated the area of the blind hat section with Eastwood's Internal frame coating and the included extension with nozzle made application a breeze. I was refurbishing the toolbox and my main concern was the elimination of rust and this product helped me do that.
    awsome product (Posted on 9/30/13)
    Review by FRANK
    Quality
    Price
    Value
    i used this product to treat the inside of a frame over a year ago amazing how this stuff works with little or no prep,i pressure washed as much as i could but some areas are just impossible to get to,no signs of flaking or peeeling anywhere,it seems that the eastwood really spends some time in research and developement of a product,becuase this produt
    Used one can this morning... (Posted on 8/31/13)
    Review by Christopher
    Quality
    Price
    Value
    My 2010 Equinox was starting to show signs of slight corrosion on the underside. So I figured I would wash it down and then use this product to coat as much of the vehicle as I could. The spray nozzle worked like a charm. I was able to get into the uni-body frame and other places where salt likes to sit. I'm going to buy another can to coat any where else on the floors, etc. It doesn't come off the skin easy so I'm hoping it's the same on metal. Time will tell if it stops the rust that's there and prevents other rust from forming.

    Items 11 to 20 of 100 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register