Eastwood Internal Frame Coating w/Spray Nozzle

    Item #12515Z

    Quality
    Price
    Value
    96 Review(s)

    Details

    Internal Frame Coating is a quality rust inhibitor that destroys rust hiding inside the chassis, so it doesn’t rust its way through

    You spend time and money restoring a chassis...but what about all that rust inside the frame? Use our Internal Frame Coating to make your chassis rust-free throughout!
    • Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface
    • Zinc phosphate seals it to prevent future corrosion
    • 24"-long tube with conical nozzle reaches in to spray coating in a radial pattern for complete coverage
    • Covers 10 sq. ft. per can
    • Fully cures in 24 hours


    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

    About Eastwood Internal Frame Coating w/Spray Nozzle

    Internal frame coating is formulated to convert and encapsulate the rust INSIDE your frame. Our formulation also incorporates zinc phosphate to further protect the metal from future corrosion. The viscosity is stabilized to assure proper flow and penetration to the existing corrosion and will yield complete coverage when sprayed with the included "conical nozzle". Easy to use and perfect for rust proofing, this must-have product is aerosolized to simply spray the entire inside of the frame with the supplied extension tube and "conical nozzle" for complete coverage and elimination of the rust for years of protection.

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Contents

    Internal Frame Coating w/Spray Nozzle, 14-oz. aerosol


    Specs

    Application

    Use included extension tube and conical nozzle, and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck.


    FAQ’s

    Top coating can be done after 24 hour cure Can be used as a primer on external metal surfaces


    Safety

    always wear protective eye, face and hand protection when applying


    Warranty

    made in USA 1 year warranty


    Application

    Use included extension tube and conical nozzle and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. 2 cans are required for a subrame vehicle and 3 cans for a full frame vehicle. Note: truck frame will require 3 cans 1 can covers 10 sq ft.


    Customers also viewed:

    Customer Reviews

    Items 41 to 50 of 96 total

    per page
    pretty slick (Posted on 12/4/11)
    Review by 69 Stingray
    Price
    Value
    Quality
    This stuff was pretty easy to apply. As others have mentioned, make sure to mask off all holes not being used to insert the tube. Otherwise, you'll have the green paint all over your driveway/garage floor. Just used it today so I can't speak to the longevity of the product. I'll check back in a year to let you know how it performs.
    great product (Posted on 11/28/11)
    Review by mike
    Quality
    Price
    Value
    This is a great product and easy to use. I did 1 car with it to experiment with and bought more to do a 2nd car. very easy to use and 1 can went a long way. would definitely buy again . The price has gone up 2 dollars a can since I started but it is still a good deal. You will be amazed at the ease of application.
    perfect for the job (Posted on 11/16/11)
    Review by montecarloman454
    Price
    Value
    Quality
    I sandblasted my frame with the body on the frame.I had to do something with the areas i couldn't get into to blast.This worked perfect for what i wanted to do.I bought 4 cans and wished i gotten 6 or 8.I could have done all the boxed frame area with 4, but i wanted to blast inside of all the floor pans braces and trunk braces.I was able to spray everything from the rear of the frame to the front of the frame , up to the engine bay area.2 more cans and i will have the rest of frame done.I sprayed the heck out of the rear portion of the frame from midway back, where most of the rust was worse.TIP: i saw some comments about nozzles coming off. I took a small paper clip and used part of the clip and coiled it tighly around the nozzle, where the lip on the brass fitting and coiled down to the bottom of the brass fitting. i used a neddlenose plier and and regular plier to do that. I didnt have any issues with nozzle or spray patterns. I just used two of the long tubes for 4 cans, so i didn't have to make any more coiled tips right away.Just get 8 cans and that will coat everything twice over if your real picky about stuff like this.I am going to get a couple of the black cans to cover the green paint for the visible areas because it is a show car.
    Sprayer malfunctioned (Posted on 11/13/11)
    Review by rrobm@hotmail.com
    Price
    Value
    Quality
    Seems like a good idea, and I have had good results with other Eastwood products. However, the sprayer would not attach to the can properly, and I was unable to use the product as intended.
    good product but applicator doesn't always function well. (Posted on 10/3/11)
    Review by luke
    Value
    Quality
    Price
    I like the product, I like the idea of it, but the applicator nozzle needs a lot of work otherwise you waste most of the product and your time. I have a borescope, so after I coated the inside of my challengers frame rails (if you wanna call'em that) I checked how well it coated. on the shorter rails, like the ones under the floorpan, it covers well. However- on the taller rails i.e. the front frame rails in the engine comp. or the ones under the trunk pan, the top third is uncoated. It would help if they designed the nozzel with some vertical holes and shrank their overall size a bit. I used 3 cans trying to get the coverage I needed but no dice. This stuff would be great, if the applicator were redisigned.
    Good for more then frames (Posted on 9/21/11)
    Review by Chris
    Value
    Quality
    Price
    Used this on my 87 Chevy Monte Carlo SS. I sprayed it in the spaces between the inner and outer body panels and from the spots I could view it coated very well. I used 5 cans on the body.
    Good studf (Posted on 9/10/11)
    Review by Geo Dude
    Value
    Quality
    Price
    Can't speak for the rust proofing abilities yet, but the nozzle and long tube make for excellent coverage of impossible to reach areas. Application to the rocker panels and wheel wells for my Geo took about a can and a half for one side, and I am confident I hit every nook and cranny.

    EastWoods constant badgering for reviews and more purchases is a bit annoying though. If the product works we will come back for more. Simple enoug.
    Great product (Posted on 9/6/11)
    Review by High Crest 1
    Value
    Quality
    Price
    Used it to treat a fully boxed and x'ed street rod frame. Material worked as described and the hose and spray nozzle worked better than expected. Price seems right for the product when considering the accompanying spray tube and nozzle. Once I got the feel for spray coverage I was able to manage the entire frame and support box tubing with by 4 can order. Time will tell if the product lives up to it's advertising but judging from test pieces expose to weather it should be as good as claimed. I will be ordering more for other projects.
    Excellent product ++++++ (Posted on 9/3/11)
    Review by Big Dog
    Value
    Quality
    Price
    The internal frame coating goes on easly with the spray nozzle,giving entire area a exellent coating of paint.Great hard finish that will last a long time..I use the spray nozzle with other Eastwood rust coatings to get the hard to reach spots..THANX
    I hate this stuff (Posted on 8/17/11)
    Review by jdawg9696
    Price
    Value
    Quality
    I used this stuff and I thought it was crap... I sprayed it light for the first 2 coats then started to cover heavier.. So I sprayed it on good and it flacked and rusted through... I'll spend more and buy the rust encapulator it's worth it... Atleast it never rusted...

    Items 41 to 50 of 96 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register