Eastwood Internal Frame Coating w/Spray Nozzle

Item #12515 Z

Quality
Price
Value

75 Review(s)

Details

Internal Frame Coating destroys rust hiding inside the chassis, so it doesn’t rust its way through

You spend time and money restoring a chassis...but what about all that rust inside the frame? Use our Internal Frame Coating to make your chassis rust-free throughout!

Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface
Zinc phosphate seals it to prevent future corrosion
24"-long tube with conical nozzle reaches in to spray coating in a radial pattern for complete coverage
Covers 10 sq. ft. per can
Fully cures in 24 hours

About Eastwood Internal Frame Coating w/Spray Nozzle

Use our Internal Frame Coating to make your chassis rust-free throughout! Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface, and zinc phosphate seals it to prevent future corrosion. Penetrates under the heaviest surface rust. If not treated, the metal surface will continue to rust and begin to show as paint flaking, pin holes or even worse—structural frame failure.

14-oz. aerosol can includes an 24"-long extension tube with conical nozzle that reaches in to apply the coating in a radial spray pattern for complete coverage. Insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck. Fully cures in 24 hours. Made in the USA.

Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.

Internal Frame Coating w/Spray Nozzle, 14-oz. aerosol

Application

Use included extension tube and conical nozzle, and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck.

(Q) When can I top-coat over it?
(A) Top coating can be done after the 24-hour cure. Can be used as a primer on external metal surfaces.

Always wear protective eye, face and hand protection when applying.

Click Here for Material Safety Data Sheet

1-year mfr's. warranty against defects.

Click here for instructions

Customer Reviews

I believe It'll do the job (Posted on 6/8/13) Review by Thomas

Price
Value
Quality

This stuff really does a great job as far as coverage and ease of using. I'm glad before trying, that I read some reviews on this product. It will leak out here and there, so cover the floor.Old plastic shower curtains worked well for me. So far I've used it on a partially rebuilt rocker panel and done about half my undercarriage frame. Hope to make this 4th Gen Maxima last another 5 yrs. Thank You Eastwood

Good Way To Coat Inside Fenders!!!!!!!!!!!!! (Posted on 5/16/13) Review by Awalll

Value
Quality
Price

The spray nozzle worked exactly as advertised, and allowed me to completely coat the Inside of my Fenders Loved Being Able To Apply It Where It Where I Needed It To Be !!!!. I'm satisfied my Fenders is now protected from future corrosion. Thanks Eastwood!

worked well,i hope! (Posted on 4/2/13) Review by randy

Price
Value
Quality

15 bucks a can is ok. I would buy it again for my next project. I would like to see it a little thicker consistancy or a different nozzle for more of a rattle can spray so my 15 dollars doesn't end up on the shed floor

Excellent Treatment for Hard to get places - doors (Posted on 4/2/13) Review by Mikey Bakken

Price
Value
Quality

I used to treat the insides of some rusty doors. Of course they are difficult to get inside, near corners and edges. The brilliant hose with nozzle (included) gets way back in all the areas you need. Label states states it stops rust and coats to prevent further rust. It is a nice thick coating. Caution; when the nozzle gets to an opening it sprays the walls, toolbox, me, etc. Pricey but considering the quality and time savings it is a great value.

Very good Product (Posted on 3/14/13) Review by skoolbiz

Price
Value
Quality

Product does a very good job of getting into those tight places. If there are any holes in the frame rail, you can expect some overspray to come out, so to prevent that you may want to tape up any holes that you don't want the spray to come out. Product covers very well. Have used the product many times and will use again in the future.

Finally, a way to protect the inside of the frame. (Posted on 2/19/13) Review by Biotex

Price
Value
Quality

The spray nozzle worked exactly as advertised, and allowed me to completely coat the inside of my frame. I'm satisfied my frame is now protected from future corrosion. Thanks Eastwood!

Went on great (Posted on 2/1/13) Review by Doug

Price
Value
Quality

I used it on my T-Bird frame and it went on well, the frame was already painted so i taped up all of the holes but a little still leaked out. Great idea but only time will tell if it wored well.

Really great product! (Posted on 1/1/13) Review by Mike

Quality
Price
Value

I used the cans with the sprayer hose-genius design and easy. Make sure you tape off frame holes, put plastic down on the floor. Cures very fast. Rock hard when it cures. Impressive product.

good (Posted on 12/8/12) Review by blazer hater

Quality
Price
Value

good stuff,used inside rockers/quarters on 2 dr blazer,good spray nice tube/brass sprayer
TIME WILL TELL???

Thumbs up. (Posted on 11/18/12) Review by Justin

Quality
Price
Value

The key is to catch your car before the rust starts. I found a tiny bit of rust when I pulled a rubber plug so it was just in time.

I was able to hit all the frame pars of the unibody, the front fame rails and upper rails under the fenders with six cans so stock up any go at it. The price would be better if there was a discount for buying a case, but product does its job so i will live with it. You are going to get messy when you do this.