Eastwood Internal Frame Coating w/Spray Nozzle

    Item #12515Z

    Quality
    Price
    Value
    96 Review(s)

    Details

    Internal Frame Coating is a quality rust inhibitor that destroys rust hiding inside the chassis, so it doesn’t rust its way through

    You spend time and money restoring a chassis...but what about all that rust inside the frame? Use our Internal Frame Coating to make your chassis rust-free throughout!
    • Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface
    • Zinc phosphate seals it to prevent future corrosion
    • 24"-long tube with conical nozzle reaches in to spray coating in a radial pattern for complete coverage
    • Covers 10 sq. ft. per can
    • Fully cures in 24 hours


    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

    About Eastwood Internal Frame Coating w/Spray Nozzle

    Internal frame coating is formulated to convert and encapsulate the rust INSIDE your frame. Our formulation also incorporates zinc phosphate to further protect the metal from future corrosion. The viscosity is stabilized to assure proper flow and penetration to the existing corrosion and will yield complete coverage when sprayed with the included "conical nozzle". Easy to use and perfect for rust proofing, this must-have product is aerosolized to simply spray the entire inside of the frame with the supplied extension tube and "conical nozzle" for complete coverage and elimination of the rust for years of protection.

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Contents

    Internal Frame Coating w/Spray Nozzle, 14-oz. aerosol


    Specs

    Application

    Use included extension tube and conical nozzle, and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck.


    FAQ’s

    Top coating can be done after 24 hour cure Can be used as a primer on external metal surfaces


    Safety

    always wear protective eye, face and hand protection when applying


    Warranty

    made in USA 1 year warranty


    Application

    Use included extension tube and conical nozzle and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. 2 cans are required for a subrame vehicle and 3 cans for a full frame vehicle. Note: truck frame will require 3 cans 1 can covers 10 sq ft.


    Customers also viewed:

    Customer Reviews

    Items 71 to 80 of 96 total

    per page
    works well, nicely tought out (Posted on 10/2/10)
    Review by Eric in NH
    Price
    Value
    Quality
    I have a 1999 Pathfinder that had some rust starting on the unibody frame. in an effort to make the car last another 200k miles, I bought the inner frame coating to try and prevent any further rust. With the hose attached to the nozzle now (I had heard people had problems with the first setup) I had no problems at all. it was easy to snake the tube into the drain holes and pump a lot of coating onto places that would otherwise be uncoatable. time will tell how well of a job it does keeping the rust at bay, but as far as application goes it is a very slick setup. I wish it was a little cheaper, but if it does keep the rust out it is WELL worth the cost. plan on ordering some more to do a second application on some tough looking areas, and I plan to use it on the inner parts of the hood as well! Thanks!
    Looks good / Expensive (Posted on 9/21/10)
    Review by Ford Guy
    Price
    Value
    Quality
    I am in the process of restoring two uni-body vehicles. Both will be drivers, but I am giving them a near show quality restoration. A lot of work that I don't want to do again for a VERY long time.

    That being said, I am willing to spend a little extra time (and money) sealing up those tough-to-reach places. So far I did the frame structure of the deck lid that I had soda blasted. I applied it everywhere I could reach until it ran out from under the seams. It flows pretty well, and is a bit runny, so it can travel into tight recess that a simple spray alone might not otherwise reach. I am very pleased without the results, although it did take a couple minutes to get the hang of applying it.

    At $20 a can, its expensive. No two ways about it. BUT, it is a large can. And, I would probably be spending about $10 to get the equivalent amount of paint without the delivery system, the special formulations, or the benefit of the improved coverage.

    At the end of the day, the decision is pretty simple. If you are spending any amount of effort or money on your vehicles restoration, BUY THIS PRODUCT. I can't see needing more than 3-4 cans to do every recess in your vehicle. And for $60-$80 to be able to get in just about every place on your vehicle that you can't otherwise protect (i.e. all you guys who are dipping your vehicles) it's cheap insurance.
    Good but.... (Posted on 9/15/10)
    Review by HokieJoe
    Value
    Quality
    Price
    very easy to use, but I have a fully boxed frame on a 1970 GM A body convertible. I used two cans, and easily need two or even three more. I inspected the inside with a light and a mirror, and did notice places with uneven coverage. I also wondered why Eastwood didn't just put Rust Encapsulator in a can with a spray wand. The wand works great, and I thought RE was supposed to be the ultimate rust treatment. Just wondering.
    Should be good with a little innovation. (Posted on 9/2/10)
    Review by Beerstalker
    Value
    Quality
    Price
    I am doing all the unibody channels on a '73 Cougar convertible. The rockers are 75" long- too long to reach with an 18' wand, and I use the term wand loosely- it's like a limp noodle. I put two of the tubing sections together with a small piece of brass tubing- it looks kike a piece uf brake tubing would work. I taped them to a 4' long 1/4" rod. Insert the rod, and start spraying as you slowly remove the rod. Also, cover all the access holes with transparent tape--you'll be able to see coverage without making a mess.
    great product (Posted on 8/30/10)
    Review by RP
    Value
    Quality
    Price
    Finally here is a product that finishes the job when you are removing rust from a frame. This product has excellent coating and can get in to all the tight places. I recommend this product highly.
    Works Great (Posted on 8/28/10)
    Review by Mike
    Value
    Quality
    Price
    I bought 2 cans to do the inside of my '67 Camaro Sub-frame. Works great, covered good. I highly recommend watching the Video first. I had no problems. I think secret is to shake very well, and move as fast as possible. And shake again whenever possible. I am very pleased with ease, and coverage. Only time will tell as for longevity. Great Product!
    Great product - works well, but have a suggestion (Posted on 8/25/10)
    Review by Dave
    Value
    Quality
    Price
    I bought three cans of the Internal Frame Coating to use on the boxed areas of my 69 GTO convertible... I probably should have bought four though.
    It was very easy to use and seemed to cover the visible areas fairly well.
    You definitely need eye protection though as it will spray out through any holes as you move the tube.
    The only issue I had was that trying to "snake" the plastic tube into the frame sometimes didn't always work as expected because it kinked up...so I'm not sure I covered all surfaces completely. That may be part of the reason I used three cans and really should have had four.
    I think that if the tube was just a little more rigid, it would work better. Also, as another user posted, it would be better if it was black. Unless you don't care about the ugly greenish yellow color, you'll need to paint over it through the holes in the frame etc.
    However, I am very confident it will work well just like all the other Eastwood products I've purchased.
    great product ,rom to improve (Posted on 8/22/10)
    Review by rdfrmn53
    Value
    Quality
    Price
    Piled 200' 1" rope hauled from saltwater & let it sit in back of 4 runner 12hrs. Stupidest of stuoid .
    This product wil enable me to minimize damage as "96 truck @ 123000 w/ many left .
    Would like to see longer wand .
    Great product (Posted on 8/20/10)
    Review by Tef
    Value
    Quality
    Price
    This is a great product, easy to use and to clean up, I used it on my chevelle frame that I am doing ground up restoration on and it solved the problem of how to protect the area's that the body shop didn't cover. Thanks guy's at Eastwood!
    loved it, well thought out (Posted on 8/19/10)
    Review by Eric in NH
    Value
    Quality
    Price
    I just used 2 cans on my '99 Pathfinders uni-body frame. seems to really work well at coating and creeping into the frame. I am hoping it helps stave off the dreaded frame rot, time will tell. The new nozzle with the built on hose really worked awesome for me. I think I will order maybe one or two more cans, just to be sure I have it all SUPER coated as I do already have some surface rust starting. better safe than sorry, and a few cans sure beats uni-body repair later down the road! I think this is WELL worth trying,I have always had great luck with other products from eastwood and have no reason to think this wont work great. Thanks!

    Items 71 to 80 of 96 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register