Eastwood Internal Frame Coating w/Spray Nozzle

    Item #12515Z

    Quality
    Price
    Value
    100 Review(s)

    Details

    Internal Frame Coating is a quality rust inhibitor that destroys rust hiding inside the chassis, so it doesn’t rust its way through

    You spend time and money restoring a chassis...but what about all that rust inside the frame? Use our Internal Frame Coating to make your chassis rust-free throughout!
    • Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface
    • Zinc phosphate seals it to prevent future corrosion
    • 24"-long tube with conical nozzle reaches in to spray coating in a radial pattern for complete coverage
    • Covers 10 sq. ft. per can
    • Fully cures in 24 hours


    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

    About Eastwood Internal Frame Coating w/Spray Nozzle

    Internal frame coating is formulated to convert and encapsulate the rust INSIDE your frame. Our formulation also incorporates zinc phosphate to further protect the metal from future corrosion. The viscosity is stabilized to assure proper flow and penetration to the existing corrosion and will yield complete coverage when sprayed with the included "conical nozzle". Easy to use and perfect for rust proofing, this must-have product is aerosolized to simply spray the entire inside of the frame with the supplied extension tube and "conical nozzle" for complete coverage and elimination of the rust for years of protection.

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Contents

    Internal Frame Coating w/Spray Nozzle, 14-oz. aerosol


    Specs

    Application

    Use included extension tube and conical nozzle, and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck.


    FAQ’s

    Top coating can be done after 24 hour cure Can be used as a primer on external metal surfaces


    Safety

    always wear protective eye, face and hand protection when applying


    Warranty

    made in USA 1 year warranty


    Application

    Use included extension tube and conical nozzle and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. 2 cans are required for a subrame vehicle and 3 cans for a full frame vehicle. Note: truck frame will require 3 cans 1 can covers 10 sq ft.


    Customers also viewed:

    Customer Reviews

    Items 31 to 40 of 100 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6
    7. ...
    8. 10
    Finally, a way to protect the inside of the frame. (Posted on 2/19/13)
    Review by Biotex
    Price
    Value
    Quality
    The spray nozzle worked exactly as advertised, and allowed me to completely coat the inside of my frame. I'm satisfied my frame is now protected from future corrosion. Thanks Eastwood!
    Went on great (Posted on 2/1/13)
    Review by Doug
    Price
    Value
    Quality
    I used it on my T-Bird frame and it went on well, the frame was already painted so i taped up all of the holes but a little still leaked out. Great idea but only time will tell if it wored well.
    Really great product! (Posted on 1/1/13)
    Review by Mike
    Quality
    Price
    Value
    I used the cans with the sprayer hose-genius design and easy. Make sure you tape off frame holes, put plastic down on the floor. Cures very fast. Rock hard when it cures. Impressive product.
    good (Posted on 12/8/12)
    Review by blazer hater
    Quality
    Price
    Value
    good stuff,used inside rockers/quarters on 2 dr blazer,good spray nice tube/brass sprayer
    TIME WILL TELL???
    Thumbs up. (Posted on 11/18/12)
    Review by Justin
    Quality
    Price
    Value
    The key is to catch your car before the rust starts. I found a tiny bit of rust when I pulled a rubber plug so it was just in time.

    I was able to hit all the frame pars of the unibody, the front fame rails and upper rails under the fenders with six cans so stock up any go at it. The price would be better if there was a discount for buying a case, but product does its job so i will live with it. You are going to get messy when you do this.
    This is a good product (Posted on 11/11/12)
    Review by Ernie
    Quality
    Price
    Value
    The nozzle worked well for reaching tough areas. I highly recommend wearing gloves and old cloths. This does make a mess. I had trouble with one can but Eastwood replaced it. I would recommend this and would purchase again.
    Thank You,
    Great for Rustproofing Rocker panels on Pickups!! (Posted on 11/10/12)
    Review by Justin S
    Quality
    Price
    Value
    Used it to keep the rockers from rusting out on my Silverado. The salt they use seems to eat them up on the other trucks I have seen, The 2ft tube works great to get into the long extended cab rockers! Just don't lay under the truck while doing it! It leaks out of the water holes onto you, Ask me how I know!
    Not bad (Posted on 10/15/12)
    Review by DevilDog
    Quality
    Price
    Value
    I do recommend this product. make sure you plug up open holes in the frame or tape them up, and if you dont want it to get on the floor i recommend putting some kind of drop cloth down. I used 4 cans on my 88 dodge raider frame, could of used 2 more. No way would 2 cans do a frame properly. I wish the price was a little cheaper though!
    Good when on sale (Posted on 10/1/12)
    Review by sixtharmy
    Price
    Value
    Quality
    Liked the idea of this product, but found $20 + $5 shipping to be a bit steep. Checked back periodically until it went on sale for $15 and signed up for emails to get free ship on order. One can coated interior of frame horns and rocker panels on my subcompact. Applied easily. Spray nozzle works well. Covered ground to avoid leakage stain. Odor in car went away after 3-4 days. I'll give it a few years and see how well it stops rust.
    Great Product (Posted on 7/17/12)
    Review by PatG
    Price
    Value
    Quality
    Just used this product last weekend. Worked as promised. Drilled access holes to a boxed section of my car body, taped tube to a steel rod, and fed tube/rod deep into car body cavity. Sprayed out great through tube with spray end fitting. Thickens rapidly and only dripped out a bit. Flashlight shows great coverage. Very happy with product.

    Items 31 to 40 of 100 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6
    7. ...
    8. 10

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register