Eastwood Internal Frame Coating w/Spray Nozzle

    Item #12515Z

    Quality
    Price
    Value
    100 Review(s)

    Details

    Internal Frame Coating is a quality rust inhibitor that destroys rust hiding inside the chassis, so it doesn’t rust its way through

    You spend time and money restoring a chassis...but what about all that rust inside the frame? Use our Internal Frame Coating to make your chassis rust-free throughout!
    • Tough phenolic resin penetrates, converts and encapsulates the rust on the internal surface
    • Zinc phosphate seals it to prevent future corrosion
    • 24"-long tube with conical nozzle reaches in to spray coating in a radial pattern for complete coverage
    • Covers 10 sq. ft. per can
    • Fully cures in 24 hours


    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

    About Eastwood Internal Frame Coating w/Spray Nozzle

    Internal frame coating is formulated to convert and encapsulate the rust INSIDE your frame. Our formulation also incorporates zinc phosphate to further protect the metal from future corrosion. The viscosity is stabilized to assure proper flow and penetration to the existing corrosion and will yield complete coverage when sprayed with the included "conical nozzle". Easy to use and perfect for rust proofing, this must-have product is aerosolized to simply spray the entire inside of the frame with the supplied extension tube and "conical nozzle" for complete coverage and elimination of the rust for years of protection.

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Contents

    Internal Frame Coating w/Spray Nozzle, 14-oz. aerosol


    Specs

    Application

    Use included extension tube and conical nozzle, and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. Two 14-oz. aerosol cans are required for a subframe vehicle, 3 cans for a full-frame vehicle or truck.


    FAQ’s

    Top coating can be done after 24 hour cure Can be used as a primer on external metal surfaces


    Safety

    always wear protective eye, face and hand protection when applying


    Warranty

    made in USA 1 year warranty


    Application

    Use included extension tube and conical nozzle and insert into bolt holes, lightening holes and any open access area in the frame. Spray using a back or forth motion to cover entire internal frame area. 2 cans are required for a subrame vehicle and 3 cans for a full frame vehicle. Note: truck frame will require 3 cans 1 can covers 10 sq ft.


    Customers also viewed:

    Customer Reviews

    Items 21 to 30 of 100 total

    per page
    Works well for what it is (Posted on 8/21/13)
    Review by Andrew
    Value
    Quality
    Price
    The product is good. I didn't want to just spray a wax product in the frame and trap the rust, so this seems to be a good alternative. The challenge of course is that i have no idea how long it will last, or how well it protects, but something is better then nothing. It is very thin, and it will drip out of the frame. Also, because you can't really control the wand, you will get uneven coverage. I flipped my frame over and did this from top and bottom using every hole I could find. I even used on some external spots that the sandblaster could not reach. I think the price for a spray can is a bit much, but that is the cost for a specialty product. I bought 3 cans and used 2.5 on a TR6 frame. I would 2 cans should normally do it, but I went around and did some touch up just in case.

    Also, do this before you paint the frame, it does run out the holes, even where you don't expect it too.
    Does nice job . (Posted on 8/3/13)
    Review by John
    Price
    Value
    Quality
    Seems like it will work very well. Will get back to you in 4-5 years and give you an update.
    Great Product! (Posted on 7/25/13)
    Review by Marty
    Price
    Value
    Quality
    I've been using this for several years and can't say enough good things about it. Remember to place drop cloths under the area being coated to catch any run off. This coating flows very well. To control the wand better, get a piece of welding rod or coat hanger, make a small 90 degree bend near the end and tape the wand to it. Use the wire to give you better control over the wand!
    I was able to use this product jsut as it was advertised. (Posted on 7/24/13)
    Review by Jeff
    Quality
    Price
    Value
    I masked off holes and put tarps on the floor after reading other reviews as a percaution. I really enjoyed the flexible extension once I got use to the flow rate I did my entire frame and also other areas that I could get the extension in.
    Review Eastwood Internal Frame Coating w/Spray Nozzle (Posted on 7/24/13)
    Review by Mustang7173
    Quality
    Price
    Value
    Wow! The long tube and can reach areas where I cannot. I sprayed in areas where I could not get Rust Encapsulator. I also sprayed in the cowl area of my mustang. I liked this product so much, I bought another can. Recommended!
    I believe It'll do the job (Posted on 6/8/13)
    Review by Thomas
    Price
    Value
    Quality
    This stuff really does a great job as far as coverage and ease of using. I'm glad before trying, that I read some reviews on this product. It will leak out here and there, so cover the floor.Old plastic shower curtains worked well for me. So far I've used it on a partially rebuilt rocker panel and done about half my undercarriage frame. Hope to make this 4th Gen Maxima last another 5 yrs. Thank You Eastwood
    Good Way To Coat Inside Fenders!!!!!!!!!!!!! (Posted on 5/16/13)
    Review by Awalll
    Value
    Quality
    Price
    The spray nozzle worked exactly as advertised, and allowed me to completely coat the Inside of my Fenders Loved Being Able To Apply It Where It Where I Needed It To Be !!!!. I'm satisfied my Fenders is now protected from future corrosion. Thanks Eastwood!
    worked well,i hope! (Posted on 4/2/13)
    Review by randy
    Price
    Value
    Quality
    15 bucks a can is ok. I would buy it again for my next project. I would like to see it a little thicker consistancy or a different nozzle for more of a rattle can spray so my 15 dollars doesn't end up on the shed floor
    Excellent Treatment for Hard to get places - doors (Posted on 4/2/13)
    Review by Mikey Bakken
    Price
    Value
    Quality
    I used to treat the insides of some rusty doors. Of course they are difficult to get inside, near corners and edges. The brilliant hose with nozzle (included) gets way back in all the areas you need. Label states states it stops rust and coats to prevent further rust. It is a nice thick coating. Caution; when the nozzle gets to an opening it sprays the walls, toolbox, me, etc. Pricey but considering the quality and time savings it is a great value.
    Very good Product (Posted on 3/14/13)
    Review by skoolbiz
    Price
    Value
    Quality
    Product does a very good job of getting into those tight places. If there are any holes in the frame rail, you can expect some overspray to come out, so to prevent that you may want to tape up any holes that you don't want the spray to come out. Product covers very well. Have used the product many times and will use again in the future.

    Items 21 to 30 of 100 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register