Eastwood Metal Wash 7 oz

    Item #10120

    Quality
    Price
    Value
    3 Review(s)

    Details

    Metal Wash Concentrate is your water-based solution for cleaning greasy metal parts Non-toxic, concentrated compound removes grease, oily preservatives and contaminants to prepare surface for the topcoat, leaving behind corrosion inhibitors.
    • Promotes adhesion of paints and powder coatings
    • Prevents flash rusting for up to 3 weeks
    • 7 ozs. makes up to 8-10 quarts of solution

    About Eastwood Metal Wash 7 oz

    Metal Wash cleans and protects in one quick step without using harsh or flammable solvents, and promotes topcoat adhesion on bare metal. Mix with hot water; 7 ozs. of concentrate makes 8-10 quarts of solution (or mix 5 level teaspoons with 1 quart of warm water). Apply by dipping or using a pump spray bottle. Metal wash not only removes residual grease and oil but also leaves a protective film behind that prevents rust for up to 3 weeks in dry storage. Metal wash is an excellent prep for any coating. For faster cleaning (without corrosion resistance) use PRE Painting Prep (10041Z).


    Contents

    7-oz. container of Metal Wash Concentrate


    Accessories

    10041Z PRE Painting Prep


    MSDS Sheet

    Click Here for Material Safety Data Sheet


    Safety

    Always wear eye, skin and respiratory protection.


    Customers also viewed:

    Customer Reviews

    3 Item(s)

    per page
    Excellent product (Posted on 3/21/13)
    Review by Walter
    Quality
    Price
    Value
    This product is very useful a must for every restoration I usually clean my parts with water but I need to blow it dry with air compressor right away to avoid the flash rust but with this it really help my jobs.
    Has worked well fo me (Posted on 2/24/13)
    Review by duke46
    Price
    Value
    Quality
    I have been using this product for over 5 years right after I remove a piece of steel from my blast cabinet. I bow the part off and then rinse the part down and then blow it dry. You can see is washing away any left over media dust. Once the part is dry I can prep and powder coat the item. It does a great job of keeping rust away for weeks and that is also a big + for me.
    Great price (Posted on 4/17/10)
    Review by Matt
    Price
    Value
    Quality
    A little bit of powder in the spray bottle, add water, shake, and presto! Great for final wipe down of bare metal before priming. Be careful to avoid breathing the dust when taking the lid off, it's probably not good for you, so where a dust mask when miking to be safe. Will keep rust away on bare metal, but not forever. Eastwood advertises about three weeks of corrosion protection on bare metal and that's sounds about right (based on my experience).

    3 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register