- Home
- Eastwood Anodize Remover Qt
- Product Reviews
Details
Eastwood Anodize Remover - A safer way to strip anodizing from those valuable aluminum trim parts before buffing or powder coating. This water based formula removes anodize coatings in as quickly as 20 minutes. Available in Quarts and Gallons.
Eastwood Diamond Clear Gloss for Bare MetalStarting at: $12.99 |
Eastwood PRE Painting PrepStarting at: $7.99 |
Tank Tone Metallic Coating Aerosol 13 oz
Only
$14.99
As low as:
$14.49
|
About Eastwood Anodize Remover Qt
Eastwood Anodize Remover - A safer way to strip anodizing from those valuable aluminum trim parts before buffing or powder coating. This water based formula removes anodize coatings in as quickly as 20 minutes. Available in Quarts and Gallons.
one US quart, 32 fl oz
10041z PRE 10120 Metal Wash 13104 Buff Kit
always wear eye skin and respiratory protection. Consult MSDS for specific safety precautions
Customer Reviews
3 Item(s)
per page
-
Works...but finishes badly/
(Posted on 4/18/13)
Review by Rob -
Removes anodizing as advertised, but is very time critical and leaves a very splotchy and streaked finish. Wear gloves when using, watch your times and rinse thoroughly, Be prepared to deal with the streaks and blotches it always leaves behind after rinsing.Value Quality Price -
Great Product
(Posted on 8/14/11)
Review by Mike -
This product removed the anodization just as advertised. I used the product in a spray botlle and misted the piece of trim I was restoring. I allowed the product to work and then repeated.Using a scuff pad helped remove the anodized fininsh. Be sure to wear gloves and rinse the piece you restoring with clear water. This allowed me to buff out the trim to a brilliant shine, using Eastwoods buffing compounds and wheels, to a brilliant shine. I also used the trim anvil and hammer to remove some minor dings and bumps.Price Value Quality
-
Excellent product!
(Posted on 1/15/11)
Review by Big Bob -
Fully met my expectations. Worked effectively to remove anodizing. Finished four trim pieces in less than two hours.Price Value Quality
Would recommend wearing gloves when cleaning parts or handling the remover
3 Item(s)
per page












