Eastwood Coastal Hiway Blue Urethane 96 oz

    Item #50285ZP

    Details

    Eastwood Coastal Hiway Blue is a premium acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, requires 21856ZP activator.

    About Eastwood Coastal Hiway Blue Urethane 96 oz

    EW Coastal Hiway Blue is a premium acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, requires 21856ZP activator.


    Contents

    96 Fl. Oz.


    Accessories

    21856 ZP activator required. 50250 ZP Urethane Clear and 50251 ZP Activator 50240 ZP Urethane primer and 50241 ZP Activator 50040ZP THRU 50042ZP PAINT PREP KITS 12454Z Block sanding kit, 12252 3-gun set 20472 Air Management System 51550 Concours paint gun


    Safety

    Always wear appropriate eye, skin and breathing protection. consult MSDS for specific precautions and warnings


    Warranty

    Made in the USA


    Application

    Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximim adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator Use caution mixing materials as paint may begin to gel after 2 hours at 70Ö. HVLP gun setting 8-10psi 1.2-1.6mm tip. Eastwood paint is designed to give complete coverage in 2 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours


    Write Your Own Review

    Only registered users can write reviews. Please, log in or register