Eastwood Fast Etch with pump 32 oz

    Item #19415ZP

    Value
    Quality
    Price
    9 Review(s)
    Use in a well ventilated area.

    Details

    This specially formulated rust remover is a powerful, rust-fighting liquid created to meet the needs of auto restorers. It reaches even inaccessible areas, quickly dissolving iron oxide completely and leaving a zinc phosphate coating. Fast Etch can be sprayed, brushed, or used as a parts dip. It is non-toxic, non-flammable and reusable. This is not a primer. Treated surfaces should be wiped with PRE Painting Prep (10041 Z) or thinner before priming and painting.

    About Eastwood Fast Etch with pump 32 oz

    This specially formulated rust remover is a powerful, rust-fighting liquid created to meet the needs of auto restorers. It reaches even inaccessible areas, quickly dissolving iron oxide completely and leaving a zinc phosphate coating. Fast Etch can be sprayed, brushed, or used as a parts dip. It is non-toxic, non-flammable and reusable. This is not a primer. Treated surfaces should be wiped with PRE Painting Prep (10041 Z) or thinner before priming and painting.


    Contents

    32 OZ


    Accessories

    PRE Self Etching primer


    FAQ’s

    There is a minimal risk of Hydrogen embrittlement when using this rust remover. Bake de-rusted parts at 400 degrees F. for 3 hours if the minimal amount of hydrogen embrittlement is a concern. This rust remover works as a great alternative to abrasive blasting for rust removal.


    Safety

    always use in a well ventilated area. Consult MSDS for specific safety warnings


    Warranty

    MADE IN THE USA


    Application

    Eastwood Fast Etch is a Phosphoric acid solution that leaves behind a corrosion resistant coating. Removes rust in seconds to several hrs. depending on temp. and severity of rust. One pt. treats about 20 sq ft. Our rust remover works faster at 90 deg F than at 70 deg F. Fast Etch does not remove paint but may cause discoloring. Remove loose rust & degrease surface with PRE Painting Prep (10041 Z) before using rust remover. After removing rust, wipe down part with PRE Painting Prep (10041 Z) and top coat with Self Etching Primer


    Customers also viewed:

    Customer Reviews

    9 Item(s)

    per page
    Srayed it on some rusted out braces and inside roof (Posted on 7/14/14)
    Review by Tom
    Quality
    Price
    Value
    Sprayed it on and it seemed to do as described. I'll get back with you in a couple years to see if it stopped the rust - Sprayed the rust encapsulator over it.
    product works as advertised (Posted on 11/23/13)
    Review by jeff
    Quality
    Price
    Value
    I sprayed it on the underside of my van after scraping off the loose paint and scale.
    I wasn't able to return for a week. I sprayed on a soap/water solution and several minutes later power washed it off. I will know results in a year or two, but pretty confident it stopped the rust. Topped off with epoxy primer and undercoat.
    Okay (Posted on 8/14/13)
    Review by LYLE
    Value
    Quality
    Price
    I gave it an okay because most of the product leaked from the spray nozzle onto the floor. So it is quite expensive when you can't use all of it. What did go on the car was excellent.
    Eastwood needs better bottle and nozzle, other wise good product (Posted on 8/11/13)
    Review by Arthur
    Quality
    Price
    Value
    The product is great and goes a long way! but my only complaint is the bottle and spray nozzle. The bottle comes shipped completely tapped shut over the cap. As soon as the tape is removed if you turn the bottle to its side, it drips out. So when I attach the nozzle same thing. You can't spray at any angle with out it dripping out, unless completely vertical.
    Great rust remover (Posted on 5/26/13)
    Review by Wayland
    Quality
    Price
    Value
    I just use the fast etch on the frame of my '73 F250 and the rust just faded away. I am very pleased with the result and will use it again.
    Great work eastwood (Posted on 1/30/13)
    Review by ARBtn
    Price
    Value
    Quality
    I`ve used this product,but in a different way and found it works better if you give it more time to work.I was skeptical at first but I tried and it works.Eastwood has a winner here.I`ll be buying more products in the near future.
    but Eastwood does not stand good to its word (Posted on 8/18/12)
    Review by Palladin
    Price
    Value
    Quality
    Pump leaked like a sieve, haven't tried the new one.
    Great Product (Posted on 6/16/12)
    Review by banatello
    Price
    Value
    Quality
    This product is great. You do need to try and do it out of direct sunlight, you don't have to use as much. I had a hard time getting the panel clean, I had to use soap and water then use the rubbing alcohol to finally get it feeling clean.
    Works as advertised (Posted on 6/1/11)
    Review by Halbirtski
    Price
    Value
    Quality
    The product worked as it was advertised and as yet, no rust has returned. I was skeptical since I didn't see any phosphoric acid in it. I don't know the chemistry but I am happy and intend to use it some more.

    9 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register