Eastwood Rat Rod Red 96 oz w/ Activator

    Item #51074ZPKIT

    Details

    Now you can replicate the look of red oxide primer while still having a top coat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, requires 21856ZP activator.

    About Eastwood Rat Rod Red 96 oz w/ Activator

    Now you can replicate the look of red oxide primer while still having a top coat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings, a catalyzed urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, requires 21856ZP activator.


    Contents

    96 Fl. Oz. 32 OZ ACTIVATOR


    Accessories

    21856 ZP activator required. 10194zp PRE Quart 51559 digital regulator 12817 paint gun acessory kit 50040ZP THRU 50042ZP PAINT PREP KITS 12454Z Block sanding kit, 12252 3-gun set 20472 Air managemnet system 51550 Concours paint gun


    Safety

    Always wear appropriate eye, skin and breathing protection. consult MSDS for specific precautions and warnings


    Warranty

    Made in USA


    Application

    Clean surfaces of all contaminents. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesions. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator Use caution mixing materials as paint may begin to gel after 2 hours at 70ø. HVLP gun setting 8-10psi 1.2-1.6mm tip. Eastwood paint is designed to give complete coverage in 2 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours


    Customers also viewed:

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register