About 7 Inch Cleaning / Stripping Disc System
Use the stripping disc on rust and paint to get a less-aggressive, 320-grit finish. The cleaning disc is more aggressive and leaves an 80-grit finish on metal. For all discs, the maximum speed is 6,000 rpm.
31096 Cleaning Disc
31074 Cushioned Backing Pad for a 5/8" x 11 shaft
31096 Additional Cleaning Disc
Customer Reviews
-
(Posted on 1/26/10)
Super product
Review by GASMAN -
Quality Price Value If you want to strip paint, filler, and/or rust to bare metal without damage to the metal, this system is it! The black disc hogs paint off fast and the disc lasts. I did a truck lid, rear quarter, and half a floor with one disc in twenty minutes of work time. I would have used a bunch of DA paper and hours of time to have accomplished the same work with a DA.
-
(Posted on 3/6/11)
great product
Review by christian -
Quality Price Value i bought this product to scrape off some gunk and residue on my engine bay, tranny, rear end, leaf springs etc. it preforms amazingly and strips off stuff better than a wire wheel attatched to a grinder. the only drawback i can see is its size. it is a little difficult to get in nooks and cranny's but if your looking for flat work i doubt you will find something that will beat this.
-
(Posted on 5/21/11)
outstanding
Review by Jose -
Value Quality Price Excellent for prep. Just strip, then prep for mechanical Bondo mix 2 in 1. just too easy
-
(Posted on 12/7/11)
Must have for the hobbyest
Review by Nemo -
Price Value Quality This is a great stripper that last extensive abuse. I would recommend for anyone that wants to strip paint from metal without damaging the metal or using hard chemicals.















