Eastwood Plasma Cutter 40 Amp Versa-Cut

    Item #12740 Brand: Eastwood

    Quality
    Price
    Value
    58 Review(s)
    Heavy Item - Special shipping charges may apply.

    Details

    Versa-Cut 40 Plasma Cutter easily slices through materials up to 3/8" thick. Our Eastwood-designed plasma cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 3/8". Compared to mechanical cutting, our Versa-Cut 40 Plasma Cutter works significantly faster, and makes curved and intricate cuts more easily and precisely. Inverter technology offers superior arc stability and plasma cutting power using either 110 or 220 volts, making this a portable unit that is also light weight. A built-in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results.
    • Works with 110v or 220v AC input
    • 20' torch cable; 10' ground cable with clamp
    • Rated 40-amp output
    • Air flow rate: 5-7 CFM at 20-60 PSI
    • Backed by Eastwood's no-hassle 3-year warranty
    Get this portable Plasma Cutter PLUS our MIG 175 Welder and SAVE BIG!Click here to see our money-saving Versa Cut 40 Plasma Cutter and MIG175 Kit!

    Get this Plasma Cutter PLUS our MIG 135 Welder and SAVE BIG!Click here to see our money-saving Versa Cut Plasma Cutter and MIG135 Kit!

    Get this Plasma Cutter PLUS our TIG 200 Welder and SAVE BIG!Click here to see our money-saving Versa Cut Plasma Cutter and TIG 200 Welder Kit!

    This unit now comes with a black powder-coated finish.

    Click here to see our Versa Cut 40 set-up chart

    About Eastwood Plasma Cutter 40 Amp Versa-Cut

    This innovative, affordable, plasma cutter was designed and developed by Eastwood's own R&D staff, and tested in-house on the same type of real-life projects you'll use it for. It doesn't matter where you need to work, because this plasma cutter's voltage-sensing technology lets you use either a 110v or 220v outlet with our adapter cord. Works with any standard home- or shop-type air compressor within a range of 20-65 psi; internal moisture separator ensures dry air is delivered to the torch. Rated 140 volts at 40 amps. Duty cycle: 60% at 40 amps. Weighs less than 30 lbs., for easier portability.

    What is "Plasma Cutting"? Plasma cutting utilizes a high-velocity jet of ionized gas (plasma) that conducts electricity from the torch of the plasma cutter to your metal workpiece. That directed plasma stream (about 30,000 degrees F) heats the workpiece, converting the metal to molten slag. That high-velocity stream literally blows the molten metal away, leaving clean, precisely cut metal.


    Contents

    Includes: Versa Cut 40 unit, torch assembly, ground clamp assembly, 110/220V adapter cord. Agreat addition to your Plasma cutter is the Plasma guide 13689.


    Specs

    Amperage Output Range: 14-40 Amps
    Output Voltage: 96 V
    Weight: 29 Lbs.
    Duty Cycle: 60% @ 40A
    Overall Dimensions: 20.0” (508 mm) x 9.75” (248 mm) x 20.0” (508 mm)
    Electrical Input:110 VAC or 220 VAC
    Air Requirements: 5-7 CFM@ 20-60 PSI

    Amperage Output Range: 14-40 Amps
    Output Voltage: 96 V
    Weight: 29 Lbs.
    Duty Cycle: 60% @ 40A
    Overall Dimensions: 20.0” (508 mm) x 9.75” (248 mm) x 20.0” (508 mm)
    Electrical Input:110 VAC or 220 VAC
    Air Requirements: 5-7 CFM@ 20-60 PSI


    Safety

    Always wear approved eye protection and gloves. Do not use around flammable materials. Do not open machine. There are no user-serviceable parts.


    Warranty

    Click here for warranty


    Instructions

    Click here for instructions


    Accessories & Consumables

    Parts & Consumables

    12814 Versa-Cut Nozzles, 10 pcs.
    12812 Versa-Cut Electrodes, 10 pcs.

    Optional

    14127 Versa-Cut Extended Length Nozzle 5-Pack
    14128 Versa-Cut Extended Length Electrode 5-Pack

    Consumable parts can be purchased through Eastwood or are available at most local welding supply stores. If buying locally, ask for the following:
    Nozzle: Brand – Hypertherm, Part Number 020115
    Electrode: Brand – Hypertherm, Part Number 020167


    Customers also viewed:

    Customer Reviews

    Items 21 to 30 of 58 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6
    Good cutter (Posted on 5/4/13)
    Review by Mark
    Price
    Value
    Quality
    I have had this cutter for a few months now... so far so good. Was a bit nervous due to some of the negative reviews. I run a good quality air compressor and dry air and haven't had any problems at all. I would recommend this cutter to a friend.
    Decent Cutter (Posted on 4/18/13)
    Review by Chris
    Value
    Quality
    Price
    This cutter is a really good cutter for the money. I am using it on a restoration job and have had no problems whatsoever. There is a slight learning curve but not too difficult. I had floor pans removed from my truck in around 15 minutes. I am very pleased with this unit. There are a few "cheap" pieces but for this price there will always be a trade off. Once again, I am very pleased with this unit.
    great machine for body work (Posted on 4/8/13)
    Review by harry
    Price
    Value
    Quality
    I purchased this plasma cutter then read the reviews.I got scared.When I got it I was afraid to use it. I don't know what these people are talking about .This machine is great ,it cuts new metal but what is great it works on rusty old metal like about what every Mustang has. Buy the extended reach tips and go to work. aaa+++
    Great product at reasonable price (Posted on 3/29/13)
    Review by randy
    Price
    Value
    Quality
    I have earned my Versacut 60 for about 2 weeks now and I have used it several times and it always work very good.
    Smokers (Posted on 3/18/13)
    Review by Smokin joe
    Quality
    Price
    Value
    I make BBQ smokers most material is 1/4 & 3/8
    Junk. (Posted on 3/18/13)
    Review by stephen
    Quality
    Price
    Value
    When I first got my Versa Cut 40 I was nothing but happy. I made a few cuts and was pleased about its ability to cut and its overall value. That lasted a few days before it stopped working. Like others that have posted here when I called Tech support I would get voice mail every time. I sent an email to the tech department detailing the issues. I finally received a reply one week later asking for more details. The next response came about a week and a half later and they said someone from customer service would contact me and get me a new unit. After over 2 weeks I gave up on that and called customer service myself. I dealt with 2 different people (one nice and the other rude as hell) before I got them to understand that I had been dealing (or trying to deal with) the tech department who said I needed a new unit. The new unit came quickly, to my old address. How they screwed up my address is beyond me and I was lucky I knew and trusted the tenant. Once I had the unit I set it up and made a few cuts before it too died.

    I once again (knowing the drill now) emailed the tech department and waited a week for a response. Sent another email back again detailing the problem and waited over 2 weeks for someone to get back to me. When I sent an email asking how long I should wait I got an “out of office response” from someone other than the person I originally emailed. A quick call to customer service (I got the rude girl again) later confirmed that the employee I emailed was no longer with the company but I still had to deal with the tech department before I could get another replacement.

    The product is hit or miss and after reading the reviews I regret spending the money. I have spent many times more hours dealing with replacements than I have using the product because of its surprisingly low quality and reliability. The slow response of the tech department and amazingly rude customer service person is just the icing on the cake. I would not recommend this product to anyone. I teach welding to military veterans and now recommend they buy Lincoln or Miller products and avoid Eastwood electronics all together. Eastwood missed a good opportunity for advertising and exchanged it for a bad reputation among my students.
    Good, while it lasted (Posted on 2/10/13)
    Review by ManMan
    Value
    Quality
    Price
    Pros:
    Cuts well, dual voltage, easy to use.

    Cons:
    Air connection in back, on opposite side of electric plug. (Makes hooking up air when in a welding cart w/bottle a little annoying)
    cheap plastic multi-pin connector, would rather have metal connector shells

    The unit worked great, cutting through even some I-beam with no issue... but only for about 5hrs of intermittent usage . Then the "overload" light kicked on and it had to be sent for replacement. It took 6weeks for to get my replacement settled. Now, I appreciate that Christmas holidays are busy, but the only reason I even got my replacement when I did was because I was calling in to check on status every couple of days. Based on the unprofessional, unorganized lack of customer support I think this will be my last purchase from Eastwoods.
    good machine (Posted on 2/8/13)
    Review by dkmurphy
    Value
    Quality
    Price
    The plasma cutter worked fine right out of the box. With just a little practice I was cutting metal in seconds that was taking 10 to 20 minutes.
    returned like many others (Posted on 1/27/13)
    Review by Mark
    Quality
    Price
    Value
    I purchased the plasma cutter when it was on the holiday sale, hoping for better results than others that have posted here. Unfortunately, it worked great for about one hour of use, then black smoke came from the trigger assembly. After that, it would only light up the inside of the cutting tip. After no return contact from Tech Support for nearly a week, back it went, not wanting an exchange. Customer Service handled this issue well and I will continue to purchase Eastwoods consumable products.
    Nice machine (Posted on 1/20/13)
    Review by George
    Value
    Quality
    Price
    I bought this along with the TIG200, haven't used either very much, but they both seem to work fine. I was a little concerned about the post air flow of about 10 seconds, because the cutters I've used to stop as soon as you let go of the trigger, but they ashore me it's normal. When you buy both the TIG and the plasma together, you just can't beet the price.

    Items 21 to 30 of 58 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register