Eastwood Versa Cut Plasma Cutter

Item #12740

In Stock - Ready to Ship Today

Only $639.99

Now Only $599.99

Heavyweight- Special shipping charges may apply.
Price
Value
Quality

17 Review(s)

Add Items to Cart

About Eastwood Versa Cut Plasma Cutter


This innovative, affordable, plasma cutter was designed and developed by Eastwood's own R&D staff, and tested in-house on the same type of real-life projects you'll use it for. It doesn't matter where you need to work, because this plasma cutter's voltage-sensing technology lets you use either a 110v or 220v outlet with our adapter cord. Works with any standard home- or shop-type air compressor within a range of 20-65 psi; internal moisture separator ensures dry air is delivered to the torch. Rated 140 volts at 40 amps. Duty cycle: 60% at 40 amps. Weighs less than 30 lbs., for easier portability.

What is "Plasma Cutting"? Plasma cutting utilizes a high-velocity jet of ionized gas (plasma) that conducts electricity from the torch of the plasma cutter to your metal workpiece. That directed plasma stream (about 30,000 degrees F) heats the workpiece, converting the metal to molten slag. That high-velocity stream literally blows the molten metal away, leaving a clean, precise cut.
Includes: Versa Cut unit, torch assembly, ground clamp assembly, 110/220V adapter cord.
Parts & Consumables

12814 Versa-Cut Nozzles, 10 pcs.
12812 Versa-Cut Electrodes, 10 pcs.

Consumable parts can be purchased through Eastwood or are available at most local welding supply stores. If buying locally, ask for the following:
Nozzle: Brand – Hypertherm, Part Number 020115
Electrode: Brand – Hypertherm, Part Number 020167
Always wear approved eye protection and gloves. Do not use around flammable materials. Do not open machine. There are no user-serviceable parts.

See this product in action!

Customer Reviews

Items 1 to 10 of 17 total

Page:
  1. 1
  2. 2
  3. Next Page
per page
(Posted on 3/11/11) Great plasma cutter
Review by Tony
Quality
Price
Value

finally hooked up the air drier and used it last night, I have to say WOW I cut 1/8" angle then a pice of 1/4 and went through it like butter very clean cuts the first time I used it. After the 1/4" angle I went to a pice of 1/2" plate, know that is thicker than recommended but cut it just fine no problrms at all.
So far I am very Impressed and satisfied with it.

Thanks for another great machine, It goes great with my Eastwood mig 175

(Posted on 3/17/11) How awsome this unit really is
Review by Ants
Price
Value
Quality

I bought one of this units & have used it on a restore on my sons 69 chevelle and this unit is so handy it has cut every thing we put under it even cut some 3/4 in metal with ease. It aient rated @ this gage of metal but it handled it with ease @ 37 amps wow for the price it is bad ass

Ants

(Posted on 4/5/11) Well worth the money
Review by Jim
Quality
Price
Value

We were one of the pre-orders of the Plasma Cutter.
Received the unit in very good condition. I had to prep the connection for power, and we were off and running.

We are restoring a 1958 Chevy Apache, and cut up the 1978 C10 donor truck for the desired parts. And cut the rest up to make it easy to take to recycle. Had 80% of the truck cut up in 1/2 a day. Don't worry what was cut up wasn't worth using.

(Posted on 8/7/11) Excellent product!
Review by Wayne
Price
Value
Quality

I ordered this plasma cutter and just fired it up, and I have to say this sucker rocks.
On 1/8" steel the control was awesome and I could through it ridiculously fast.
For cutting 1/4" the 220v worked better and cut through it like butter. No problems at all.
For under $600, I don't think you can beat it.
Now my only problem is..... what else can I cut up?

(Posted on 9/28/11) I was shocked
Review by Rats
Value
Quality
Price

I just got this plasma cutter delivered this afternoon. Simply plugged all the connectors in like the set up video.
Made my first cut on some 3/16th steel with outstanding results. Nice clean cuts easy control arc. I think it's an outstanding value. A friend bought a competing plasma cutter for 3 times the money and this does just as good I believe.
Now I can't wait for the TIG to show up.

(Posted on 9/29/11) great little plasma cutter
Review by BigLarry
Value
Quality
Price

I was surprised at how small this unit it is but it packs some serious punch. I would run it off 220 volt if at all possible. On the 27 amp setting (it goes to 40 amps) it cut through some 1/4" wall tubing like it was tinfoil. The other thing I really liked is the 20' long torch cable, many other brands only have a 12'-15' cable. Having a 3 year warranty with a company that I know will be around is also a good selling point.

(Posted on 10/3/11) Great product
Review by Jim
Value
Quality
Price

Picked up the plasma cutter 2 weeks ago and a few hours of use so far. Very simple to use and setup. I would recommend picking up or ordering extra electrodes and nozzles however as I went through the included 2 fairly quick testing everything out.

I would recommend this to anyone however.

(Posted on 11/9/11) Great plasma cutter
Review by Sam
Quality
Price
Value

Great tool with an awesome price.

(Posted on 11/14/11) Excellent value
Review by GregW
Price
Value
Quality

Just as I expected from Eastwood, another great product at a good price. I have the TIG 200 also, which is terrific. The plasma cuts so easy, right out of the box, I was cutting like a pro. Never tried plasma before... I'll never use oxy-acetylene again. My new favorite tool.

(Posted on 12/4/11) Great product
Review by Gene
Price
Value
Quality

Purchased two weeks ago and pulled out of the box and got busy! This little sucker works better than I expected. My son borrowed it three days after I got it and was so impressed that he hasn't brought it back yet! Highly recommend.

Items 1 to 10 of 17 total

Page:
  1. 1
  2. 2
  3. Next Page
per page

Write Your Own Review

You're reviewing: Eastwood Versa Cut Plasma Cutter

How do you rate this product? *
  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value
  • + Add Image Field
    Allowed size of each image is 1 MB, sum of all images can't exceed more then 5 MB.
  •