Eastwood Plasma Cutter 40 Amp Versa-Cut

    Item #12740 Brand: Eastwood

    Quality
    Price
    Value
    58 Review(s)
    Heavy Item - Special shipping charges may apply.

    Details

    Versa-Cut 40 Plasma Cutter easily slices through materials up to 3/8" thick. Our Eastwood-designed plasma cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 3/8". Compared to mechanical cutting, our Versa-Cut 40 Plasma Cutter works significantly faster, and makes curved and intricate cuts more easily and precisely. Inverter technology offers superior arc stability and plasma cutting power using either 110 or 220 volts, making this a portable unit that is also light weight. A built-in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results.
    • Works with 110v or 220v AC input
    • 20' torch cable; 10' ground cable with clamp
    • Rated 40-amp output
    • Air flow rate: 5-7 CFM at 20-60 PSI
    • Backed by Eastwood's no-hassle 3-year warranty
    Get this portable Plasma Cutter PLUS our MIG 175 Welder and SAVE BIG!Click here to see our money-saving Versa Cut 40 Plasma Cutter and MIG175 Kit!

    Get this Plasma Cutter PLUS our MIG 135 Welder and SAVE BIG!Click here to see our money-saving Versa Cut Plasma Cutter and MIG135 Kit!

    Get this Plasma Cutter PLUS our TIG 200 Welder and SAVE BIG!Click here to see our money-saving Versa Cut Plasma Cutter and TIG 200 Welder Kit!

    This unit now comes with a black powder-coated finish.

    Click here to see our Versa Cut 40 set-up chart

    About Eastwood Plasma Cutter 40 Amp Versa-Cut

    This innovative, affordable, plasma cutter was designed and developed by Eastwood's own R&D staff, and tested in-house on the same type of real-life projects you'll use it for. It doesn't matter where you need to work, because this plasma cutter's voltage-sensing technology lets you use either a 110v or 220v outlet with our adapter cord. Works with any standard home- or shop-type air compressor within a range of 20-65 psi; internal moisture separator ensures dry air is delivered to the torch. Rated 140 volts at 40 amps. Duty cycle: 60% at 40 amps. Weighs less than 30 lbs., for easier portability.

    What is "Plasma Cutting"? Plasma cutting utilizes a high-velocity jet of ionized gas (plasma) that conducts electricity from the torch of the plasma cutter to your metal workpiece. That directed plasma stream (about 30,000 degrees F) heats the workpiece, converting the metal to molten slag. That high-velocity stream literally blows the molten metal away, leaving clean, precisely cut metal.


    Contents

    Includes: Versa Cut 40 unit, torch assembly, ground clamp assembly, 110/220V adapter cord. Agreat addition to your Plasma cutter is the Plasma guide 13689.


    Specs

    Amperage Output Range: 14-40 Amps
    Output Voltage: 96 V
    Weight: 29 Lbs.
    Duty Cycle: 60% @ 40A
    Overall Dimensions: 20.0” (508 mm) x 9.75” (248 mm) x 20.0” (508 mm)
    Electrical Input:110 VAC or 220 VAC
    Air Requirements: 5-7 CFM@ 20-60 PSI

    Amperage Output Range: 14-40 Amps
    Output Voltage: 96 V
    Weight: 29 Lbs.
    Duty Cycle: 60% @ 40A
    Overall Dimensions: 20.0” (508 mm) x 9.75” (248 mm) x 20.0” (508 mm)
    Electrical Input:110 VAC or 220 VAC
    Air Requirements: 5-7 CFM@ 20-60 PSI


    Safety

    Always wear approved eye protection and gloves. Do not use around flammable materials. Do not open machine. There are no user-serviceable parts.


    Warranty

    Click here for warranty


    Instructions

    Click here for instructions


    Accessories & Consumables

    Parts & Consumables

    12814 Versa-Cut Nozzles, 10 pcs.
    12812 Versa-Cut Electrodes, 10 pcs.

    Optional

    14127 Versa-Cut Extended Length Nozzle 5-Pack
    14128 Versa-Cut Extended Length Electrode 5-Pack

    Consumable parts can be purchased through Eastwood or are available at most local welding supply stores. If buying locally, ask for the following:
    Nozzle: Brand – Hypertherm, Part Number 020115
    Electrode: Brand – Hypertherm, Part Number 020167


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 58 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6
    excellant service (Posted on 5/19/14)
    Review by mel
    Value
    Quality
    Price
    Had minor problem to start with - apparently common with starting function (must be a small glitch in components - noticed different plug for cable?) - anyway, Eastwood picked up machine next day and back to work with entirely new cutter the next week. No questions asked w/ friendly, helpful assistance. Works great and for the price the plasma cutter can't be beat. Eastwood can be counted on to support its products.
    Awesome tool!! (Posted on 5/15/14)
    Review by Bradley
    Price
    Value
    Quality
    This is the best tool I've ever purchased for the price. Easy set up. This is so much better than a cutting torch. I build demo derby cars so I'm constantly cutting. This tool has saved me tons of time!! Buy a stand off tip adapter so you don't burn up your tips.
    Works Well (Posted on 3/28/14)
    Review by Joe
    Quality
    Price
    Value
    I work for a large restoration company and we needed a plasma cutter for fabrication needs. Works well, but I would not transport it regularly due to the cheaply made housing.
    Great machine bad customer service (Posted on 3/19/14)
    Review by Steve
    Quality
    Price
    Value
    I like the machine. Shipping was fast. Everything worked out of the box. My issue was the pricing. There were 2 different prices on e bay. I had the higher price saved in my favorites. I realized what happened after I ordered it and called Eastwood. They refused to give me the sale price even though the machine was on sale on ebay at the time of my purchase. So much for the great customer service I've heard about from others.
    plasma versa cut 40 useage (Posted on 3/8/14)
    Review by StorminNorman
    Quality
    Price
    Value
    I have used this unit several times on 1/4" metal, so far so good. This unit should come with it's own water/oil separator I had to add my own it states it has one inside but you have to take the cover off to get to it I guess? Instead of giving you a hand held welding shield they should give you there Eastwood glasses, Instead of the chipping hammer they should give you more consumables. Will Give another review later on down the road on the extensive useage.
    Works Amazing (Posted on 2/27/14)
    Review by Mitch
    Quality
    Price
    Value
    Picked up my Plasma today. Took it right out of the box, made all the connections and was cutting right away. I have used industrial plasma cutters and for the price and voltages being used this unit works perfect. Could not be happier
    Really nice machine (Posted on 2/6/14)
    Review by Christopher
    Price
    Value
    Quality
    I recently purchased this machine and have used it 3 times. The thing is very simple to hook up and use. I am very pleased with the performance, I have cut 1/4" steel down to 18 gauge and it performed flawlessly. I am worried about consumable life but after cutting with it several times, I am not seeing any wear on the tip. I do wish it came with more consumables than 2. Quite pleased, hopefully this thing holds up well. Appears to be well made and much better torch than the Chinese models on eBay I was considering for slightly less money.
    Won't work (Posted on 2/1/14)
    Review by Steven
    Price
    Value
    Quality
    I bought this plasma cutter with the mig 135 and watched all the videos on using both. The welder worked great, but the plasma cutter will not work. Will contact Eastwood during the week, because there are not any techs working the weekend. Very disappointed with item.
    Happy (Posted on 1/24/14)
    Review by Jason
    Price
    Value
    Quality
    Bought with the tig-200 while it was on sale as a package deal, never used a plasma cutter before but it dose work well
    JUNK right out of the box (Posted on 1/15/14)
    Review by Daniel
    Price
    Value
    Quality
    LIKE THE TITLE SAYS. JUNK RIGHT OT OF THE BOX. PLASMA CUTER WOULD NOT TURN ON. CUSTOMER SERVICE WAS NO BETTER THEN THE PRODUCT THEY SOLD. HAVE TO WAIT 2 WEEKS FOR REPLACEMENT PLASMA CUTTER AND WHO KNOWS IF THAT WILL EVEN WORK. WILL NOT BUY FROM EASTWOOD AGAIN!!!!!!!!!!

    Items 1 to 10 of 58 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register