Eastwood Plasma Cutter 40 Amp Versa-Cut

    Item #12740 Brand: Eastwood

    Heavy Item - Special shipping charges may apply.

    Details

    Versa-Cut 40 Plasma Cutter easily slices through materials up to 3/8" thick. Our Eastwood-designed plasma cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 3/8". Compared to mechanical cutting, our Versa-Cut 40 Plasma Cutter works significantly faster, and makes curved and intricate cuts more easily and precisely. Inverter technology offers superior arc stability and plasma cutting power using either 110 or 220 volts, making this a portable unit that is also light weight. A built-in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results.
    • Works with 110v or 220v AC input
    • 20' torch cable; 10' ground cable with clamp
    • Rated 40-amp output
    • Air flow rate: 5-7 CFM at 20-60 PSI
    • Backed by Eastwood's no-hassle 3-year warranty
    Get this portable Plasma Cutter PLUS our MIG 175 Welder and SAVE BIG!Click here to see our money-saving Versa Cut 40 Plasma Cutter and MIG175 Kit!

    Get this Plasma Cutter PLUS our MIG 135 Welder and SAVE BIG!Click here to see our money-saving Versa Cut Plasma Cutter and MIG135 Kit!

    Get this Plasma Cutter PLUS our TIG 200 Welder and SAVE BIG!Click here to see our money-saving Versa Cut Plasma Cutter and TIG 200 Welder Kit!

    This unit now comes with a black powder-coated finish.

    Click here to see our Versa Cut 40 set-up chart

    About Eastwood Plasma Cutter 40 Amp Versa-Cut

    This innovative, affordable, plasma cutter was designed and developed by Eastwood's own R&D staff, and tested in-house on the same type of real-life projects you'll use it for. It doesn't matter where you need to work, because this plasma cutter's voltage-sensing technology lets you use either a 110v or 220v outlet with our adapter cord. Works with any standard home- or shop-type air compressor within a range of 20-65 psi; internal moisture separator ensures dry air is delivered to the torch. Rated 140 volts at 40 amps. Duty cycle: 60% at 40 amps. Weighs less than 30 lbs., for easier portability.

    What is "Plasma Cutting"? Plasma cutting utilizes a high-velocity jet of ionized gas (plasma) that conducts electricity from the torch of the plasma cutter to your metal workpiece. That directed plasma stream (about 30,000 degrees F) heats the workpiece, converting the metal to molten slag. That high-velocity stream literally blows the molten metal away, leaving clean, precisely cut metal.


    Contents

    Includes: Versa Cut 40 unit, torch assembly, ground clamp assembly, 110/220V adapter cord. Agreat addition to your Plasma cutter is the Plasma guide 13689.


    Specs

    Amperage Output Range: 14-40 Amps
    Output Voltage: 96 V
    Weight: 29 Lbs.
    Duty Cycle: 60% @ 40A
    Overall Dimensions: 20.0” (508 mm) x 9.75” (248 mm) x 20.0” (508 mm)
    Electrical Input:110 VAC or 220 VAC
    Air Requirements: 5-7 CFM@ 20-60 PSI

    Amperage Output Range: 14-40 Amps
    Output Voltage: 96 V
    Weight: 29 Lbs.
    Duty Cycle: 60% @ 40A
    Overall Dimensions: 20.0” (508 mm) x 9.75” (248 mm) x 20.0” (508 mm)
    Electrical Input:110 VAC or 220 VAC
    Air Requirements: 5-7 CFM@ 20-60 PSI


    Safety

    Always wear approved eye protection and gloves. Do not use around flammable materials. Do not open machine. There are no user-serviceable parts.


    Warranty

    Click here for warranty


    Instructions

    Click here for instructions


    Accessories & Consumables

    Parts & Consumables

    12814 Versa-Cut Nozzles, 10 pcs.
    12812 Versa-Cut Electrodes, 10 pcs.

    Optional

    14127 Versa-Cut Extended Length Nozzle 5-Pack
    14128 Versa-Cut Extended Length Electrode 5-Pack

    Consumable parts can be purchased through Eastwood or are available at most local welding supply stores. If buying locally, ask for the following:
    Nozzle: Brand – Hypertherm, Part Number 020115
    Electrode: Brand – Hypertherm, Part Number 020167


    Customers also viewed:

    Customer Reviews

    Items 51 to 60 of 61 total

    per page
    1. 1
    2. ...
    3. 3
    4. 4
    5. 5
    6. 6
    7. 7
    Wow!!! (Posted on 12/14/2011)
    Review by ATF
    Price
    Value
    Quality
    Best product for the price. Had it up and running fast. Cuts great!!! So pleased I went ahead and bought the TIG 200 and the Mig 175. Sold my older linclon 135. I'm very pleased with the quality and the ability of the units to go 120vac or 220vac.
    Great product (Posted on 12/4/2011)
    Review by Gene
    Price
    Value
    Quality
    Purchased two weeks ago and pulled out of the box and got busy! This little sucker works better than I expected. My son borrowed it three days after I got it and was so impressed that he hasn't brought it back yet! Highly recommend.
    Excellent value (Posted on 11/14/2011)
    Review by GregW
    Price
    Value
    Quality
    Just as I expected from Eastwood, another great product at a good price. I have the TIG 200 also, which is terrific. The plasma cuts so easy, right out of the box, I was cutting like a pro. Never tried plasma before... I'll never use oxy-acetylene again. My new favorite tool.
    Great plasma cutter (Posted on 11/8/2011)
    Review by Sam
    Quality
    Price
    Value
    Great tool with an awesome price.
    Great product (Posted on 10/2/2011)
    Review by Jim
    Value
    Quality
    Price
    Picked up the plasma cutter 2 weeks ago and a few hours of use so far. Very simple to use and setup. I would recommend picking up or ordering extra electrodes and nozzles however as I went through the included 2 fairly quick testing everything out.

    I would recommend this to anyone however.
    great little plasma cutter (Posted on 9/29/2011)
    Review by BigLarry
    Value
    Quality
    Price
    I was surprised at how small this unit it is but it packs some serious punch. I would run it off 220 volt if at all possible. On the 27 amp setting (it goes to 40 amps) it cut through some 1/4" wall tubing like it was tinfoil. The other thing I really liked is the 20' long torch cable, many other brands only have a 12'-15' cable. Having a 3 year warranty with a company that I know will be around is also a good selling point.
    I was shocked (Posted on 9/28/2011)
    Review by Rats
    Value
    Quality
    Price
    I just got this plasma cutter delivered this afternoon. Simply plugged all the connectors in like the set up video.
    Made my first cut on some 3/16th steel with outstanding results. Nice clean cuts easy control arc. I think it's an outstanding value. A friend bought a competing plasma cutter for 3 times the money and this does just as good I believe.
    Now I can't wait for the TIG to show up.

    Excellent product! (Posted on 8/7/2011)
    Review by Wayne
    Price
    Value
    Quality
    I ordered this plasma cutter and just fired it up, and I have to say this sucker rocks.
    On 1/8" steel the control was awesome and I could through it ridiculously fast.
    For cutting 1/4" the 220v worked better and cut through it like butter. No problems at all.
    For under $600, I don't think you can beat it.
    Now my only problem is..... what else can I cut up?
    Well worth the money (Posted on 4/5/2011)
    Review by Jim
    Quality
    Price
    Value
    We were one of the pre-orders of the Plasma Cutter.
    Received the unit in very good condition. I had to prep the connection for power, and we were off and running.

    We are restoring a 1958 Chevy Apache, and cut up the 1978 C10 donor truck for the desired parts. And cut the rest up to make it easy to take to recycle. Had 80% of the truck cut up in 1/2 a day. Don't worry what was cut up wasn't worth using.
    How awsome this unit really is (Posted on 3/17/2011)
    Review by Ants
    Price
    Value
    Quality
    I bought one of this units & have used it on a restore on my sons 69 chevelle and this unit is so handy it has cut every thing we put under it even cut some 3/4 in metal with ease. It aient rated @ this gage of metal but it handled it with ease @ 37 amps wow for the price it is bad ass

    Ants

    Items 51 to 60 of 61 total

    per page
    1. 1
    2. ...
    3. 3
    4. 4
    5. 5
    6. 6
    7. 7

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register