Eastwood TIG Welder 200 Amp AC/DC

    Item #12746 Brand: Eastwood

    Heavy Item - Special shipping charges may apply.


    Eastwood TIG 200 Welder...industrial TIG features at a DIY price The specially engineered 200-amp Eastwood TIG Welder offers affordable, professional-quality TIG welding on aluminum, stainless or steel (sheet, tube or bar stock), and precise welding of thinner-gauge materials up to 1/4" thick.

    • Operates on either 110vAC, 15-amp circuit or 220vAC, 30-amp circuit
    • 1/4"-thick welding capacity
    • High-frequency start for precise arc control
    • Square-wave inverter for accurate aluminum welding
    • "WP-17"-type torch accepts common cups and collets, up to 1/8" electrodes
    • Duty cycle: 45% at 150 amps
    • Backed by Eastwood's no-hassle return policy and 3-year warranty. Try it out for 30 days and if you don't like it, return it for a full refund!
    Get this TIG 200 Welder PLUS our Plasma Cutter and SAVE BIG! Click here to see our money-saving TIG200 Welder and Versa Cut Plasma Cutter Kit!

    About Eastwood TIG Welder 200 Amp AC/DC

    Eastwood TIG200 200AMP welder features an AC/DC switch that allows both steels and aluminum to be welded with the same machine. With a 14' torch and a 10' ground cable, you'll be able to get into any space with this exceptional welding machine. It has pre- and post-flow adjustment knobs to protect your weld and torch. It even has a foot pedal to control amperage so you can get going quickly, without the need to dial-in the machine for a specific material. Powered through a NEMA50 plug.

    Automatically switches from 110v to 220v depending on input. Infinitely adjustable foot pedal and amperage control allow accurate aluminum welding, and adjustable pre- and post-gas flow results in proper arc starting, stabilization and bead cool-down. Thumb control overrides the foot pedal for out-of-position welding, or when bench welding is not an option. This exceptional Eastwood TIG Welder is backed by Eastwood's no-hassle 3-year warranty. Try it for 30 days, and if you're not satisfied, simply return it.


    TIG200 Unit
    Shielding Gas Regulator
    Shielding Gas Hose
    Ground Cable with Clamp, 10'
    TIG Torch (17 Series), 14'
    Foot Pedal for Amperage Control
    110v-to-200v Adapter Plug
    Instruction Manual
    Handheld Shield
    #7 Cup (7/16"), #6 Cup (3/8"), #5 Cup (5/16")
    Long Back Cap, Short Back Cap
    3/32" Collet Body, 3/32" Collet, 1/16" Collet, 2.0mm Collet
    Thoriated Tungsten (2.0mm Red)


    Input Voltage: Single-Phase 110vAC or 220vAC (±15%) @ 50-60Hz
    Input Amperage: 28 amps
    Output Amperage: 10-200 amps AC/DC
    No-Load Voltage: 51
    AC Duty Cycle (%): 20-80 (80% at 100 amps, 20% at 200 amps)
    Post Gas Flow: 2-8 sec.
    Pre Gas Flow: 0.1-1.0 sec.
    Remote Foot Pedal And Control: Yes
    Efficiency: 80%
    Cleaning/clearance effect (AC balance control) is adjustable to provide wider cleaning with shallow penetration to narrow cleaning with deeper penetration. Changing electrode from EN (electrode negative) to EP (electrode positive).

    Frequency is fixed at 60Hz, which provides a little wider bead but with good penetration for aluminum and magnesium.

    Inverter and MOSFET technology offer optimum performance at a very affordable price.


    Always wear an approved welding helmet and welding gloves. Do not use around flammable materials. Do not open machine; there are no user-serviceable parts inside.


    Click here for warranty


    Click here for instructions

    Accessories & Consumables


    1/6 Inch Collet Body
    3/32 Inch Collet Body
    TIG Torch Rear Back Cap
    3/8 Inch Diameter Ceramic Nozzle for TIG-200
    7/16 Inch Diameter Ceramic Nozzle for TIG-200
    1/16 Inch Diameter Torch Collet for TIG-200
    3/32 Inch Diameter Torch Collet for TIG-200
    1/16 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
    3/32 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
    1/16 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
    3/32 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
    1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
    1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
    3/32 Inch Diameter 2 Piece Green Tungsten for Steel
    1/16 Inch Diameter 2 Piece Red Tungsten for Steel
    3/32 Inch Diameter 2 Piece Red Tungsten for Steel
    2 Pack Stainless Steel Scratch Brush


    TIG Welding Cart
    Auto Darkening Welding Helmet
    Welding Jacket
    Large View Auto Darkening Helmet
    Welding Gloves

    Customers also viewed:

    Customer Reviews

    Items 41 to 50 of 91 total

    per page
    great machine (Posted on 2/17/2013)
    Review by rookieupgrade1
    I have used the big name machines and this one welds just as nice. The price makes it great. Very pleased
    So far, great welder! (Posted on 2/10/2013)
    Review by Brian
    I bought this welder as part of the plasma/tig/cart combo.

    I've been really pleased with this welder so far! It's been 7yrs since I did any welding and I was no expert then, so I'm still getting back into the groove while learning this machine but so far it's been working great It's easy to use and adjust and has had plenty of power for all my general usage needs. I really appreciate that the welder and plasma use the same type of ground cable.

    My only grip is some of the plastic connector shells and that the send a crappy hand-held welding mask with the TIG. Until we sprout 3rd arms... either knock $5 off the price, or tack on another $5 and include a real mask
    great for small to medium projects (Posted on 2/3/2013)
    Review by Signyoda
    Was so easy to set up and use within 10 minutes after unpacking. The supply hose was missing and a brief call call and 3 days later it arrived. I used it on 22ga stainless and 063 alum and was surprised how easy it was to control the puddle and run a neat tight bead on each. I would recommend this as an excellent choice to begin on or use as a hobby or even light portable industrial.
    Not impressed (Posted on 2/2/2013)
    Review by Sawyer's Chair
    Its cheap compared to other tigs, but the saying "you get what you pay for" is all too true. Mine kept turning off while welding or would have an extremely weak arc. Got a few welds out of it, but it is being returned and swapped for a mig welder. Just not worth the trouble.
    Nice machine (Posted on 1/20/2013)
    Review by George
    I haven't used it allot, but I'm very happy with it so far. We have a few Miller Econo-TIG's at work, and I actually like the TIG 200 better. If it continues to work as it has so far, you really can't beat it for the price, especially with a 3 year replacement warranty.
    first time tig (Posted on 1/13/2013)
    Review by ultimate garage
    i got the tig 200 and the plasma cutter combo when it was on sale for 1,099 buks. my first weld was on my aluminum jon boat, welded a bracket for rod holders. at first the puddle kept balling up, i increased the amp and bam got the puddle goin. the key is moving the puddle in between the welding parts. the weld looks solid, it dont look like roll of coins but its solid. the previous bad weld spots i just ran over it with the torch only on higher amp...foot pedal to the metal. im hooked on tig welding, welded today till the gas ran out. the weld looks horrible without argon gas. well that was my experience today with the tig 200, notbad for a first timer.
    oh , btw i used a 1/16 lanthanated tungsten and 1/16 4043 filler rod, but i think 3/32 been better filler.
    Great value (Posted on 12/13/2012)
    Review by Bruce Kawaguchi
    I had given up trying to find an affordable TIG. Not only is this model affordable, but it is also able to work on my 110V outlet. It also has a dual plug so it can work on 220 as well as 110. I haven't found anything that I couldn't weld. If you have a decent technique with a gas welder, this unit will make you look like a hero and not put so much heat into your surrounding metal. VERY adjustable and goes up to 1/4" with ease. I put it on a low profile cart because the case is very tall.

    One note, very minor: the gas inlet is VERY LOW on the back of the case. You will have to grind a semi circular relief on the back edge of your cart to clear the hose fittings.
    Very Happy! (Posted on 12/9/2012)
    Review by DanaG
    I reluctantly purchased this TIG welder due to numerous concerns / issues mentioned in the reviews however, Eastwood customer service is top notch. I made the jump and bought the package deal with the plasma. After quickly setting up the TIG, I was welding happily.

    Eastwood - keep up the good work with regards to customer service. It's what sold me and many hobbyists here in the US appreciate a stand up company backing their products!
    Great Reviews.....but.....Not so good experience! (Posted on 11/16/2012)
    Review by Randy
    Really don’t know what to say except the Customer Service was OK….however some calls to Customer Service and e-mails to the tech. support were never returned.
    I purchased the welder because of the good reviews but my experience has not been rewarding.
    Unit No.1 went off like 4th of July fireworks after just 1.5 hrs. getting used to the unit.
    Unit No.2…..the fan would run but would only power up when you giggled the powered cord…
    Tech said they had switched suppliers and were working out the kinks..
    Unit No.3………the fan runs but would not power up…
    They will schedule a pick up for No.3…..No.3 wasn’t the charm and I didn’t want to chance No.4 so I asked for a refund.
    I still have a ¾ tank of gas…..You can’t beat the price but I guess getting a usable unit is just a crap shoot.
    PS. I have gotten really tired of boxing up these units.
    Working GOOD (Posted on 10/27/2012)
    Review by owlshop
    Ordered in mid july . Received it ,then a couple of weeks before I got the tank and cart and plug wired . Set it up and adjusted the Argon flow,shut it off worked fine. Next day setup to weld and powered it on and it shut down and died. I had read all the reviews . Tech support said it would have to be shipped back. Talked with returns person ,she sent a pickup to FEDEX . I packed it up and it was picked up. Received new one the following week,set it up and started welding. I have about an hour on it and plan to play some more this weekend. I t had been several years since I had done any Tig welding. TIG200 is working great. Now to try some small parts/gunparts. YES I would buy it again! Works as good/better than machines at twice the price. OWLSHOP

    Items 41 to 50 of 91 total

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register