Eastwood TIG Welder 200 Amp AC/DC

    Item #12746 Brand: Eastwood

    Quality
    Price
    Value
    76 Review(s)
    Heavy Item - Special shipping charges may apply.

    Details

    Eastwood TIG 200 Welder...industrial TIG features at a DIY price The specially engineered 200-amp Eastwood TIG Welder offers affordable, professional-quality TIG welding on aluminum, stainless or steel (sheet, tube or bar stock), and precise welding of thinner-gauge materials up to 1/4" thick.

    • Operates on either 110vAC, 15-amp circuit or 220vAC, 30-amp circuit
    • 1/4"-thick welding capacity
    • High-frequency start for precise arc control
    • Square-wave inverter for accurate aluminum welding
    • "WP-17"-type torch accepts common cups and collets, up to 1/8" electrodes
    • Duty cycle: 45% at 150 amps
    • Backed by Eastwood's no-hassle return policy and 3-year warranty. Try it out for 30 days and if you don't like it, return it for a full refund!
    Get this TIG 200 Welder PLUS our Plasma Cutter and SAVE BIG! Click here to see our money-saving TIG200 Welder and Versa Cut Plasma Cutter Kit!

    About Eastwood TIG Welder 200 Amp AC/DC

    Eastwood TIG200 200AMP welder features an AC/DC switch that allows both steels and aluminum to be welded with the same machine. With a 14' torch and a 10' ground cable, you'll be able to get into any space with this exceptional welding machine. It has pre- and post-flow adjustment knobs to protect your weld and torch. It even has a foot pedal to control amperage so you can get going quickly, without the need to dial-in the machine for a specific material. Powered through a NEMA50 plug.

    Automatically switches from 110v to 220v depending on input. Infinitely adjustable foot pedal and amperage control allow accurate aluminum welding, and adjustable pre- and post-gas flow results in proper arc starting, stabilization and bead cool-down. Thumb control overrides the foot pedal for out-of-position welding, or when bench welding is not an option. This exceptional Eastwood TIG Welder is backed by Eastwood's no-hassle 3-year warranty. Try it for 30 days, and if you're not satisfied, simply return it.


    Contents

    TIG200 Unit
    Shielding Gas Regulator
    Shielding Gas Hose
    Ground Cable with Clamp, 10'
    TIG Torch (17 Series), 14'
    Foot Pedal for Amperage Control
    110v-to-200v Adapter Plug
    Instruction Manual
    Handheld Shield
    Hammer/Brush
    #7 Cup (7/16"), #6 Cup (3/8"), #5 Cup (5/16")
    Long Back Cap, Short Back Cap
    3/32" Collet Body, 3/32" Collet, 1/16" Collet, 2.0mm Collet
    Thoriated Tungsten (2.0mm Red)


    Specs

    Input Voltage: Single-Phase 110vAC or 220vAC (±15%) @ 50-60Hz
    Input Amperage: 28 amps
    Output Amperage: 10-200 amps AC/DC
    No-Load Voltage: 51
    AC Duty Cycle (%): 20-80 (80% at 100 amps, 20% at 200 amps)
    Post Gas Flow: 2-8 sec.
    Pre Gas Flow: 0.1-1.0 sec.
    Remote Foot Pedal And Control: Yes
    Efficiency: 80%
    Cleaning/clearance effect (AC balance control) is adjustable to provide wider cleaning with shallow penetration to narrow cleaning with deeper penetration. Changing electrode from EN (electrode negative) to EP (electrode positive).

    Frequency is fixed at 60Hz, which provides a little wider bead but with good penetration for aluminum and magnesium.

    Inverter and MOSFET technology offer optimum performance at a very affordable price.


    Safety

    Always wear an approved welding helmet and welding gloves. Do not use around flammable materials. Do not open machine; there are no user-serviceable parts inside.


    Warranty

    Click here for warranty


    Instructions

    Click here for instructions


    Accessories & Consumables

    Consumables

    1/6 Inch Collet Body
    3/32 Inch Collet Body
    TIG Torch Rear Back Cap
    3/8 Inch Diameter Ceramic Nozzle for TIG-200
    7/16 Inch Diameter Ceramic Nozzle for TIG-200
    1/16 Inch Diameter Torch Collet for TIG-200
    3/32 Inch Diameter Torch Collet for TIG-200
    1/16 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
    3/32 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
    1/16 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
    3/32 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
    1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
    1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
    3/32 Inch Diameter 2 Piece Green Tungsten for Steel
    1/16 Inch Diameter 2 Piece Red Tungsten for Steel
    3/32 Inch Diameter 2 Piece Red Tungsten for Steel
    2 Pack Stainless Steel Scratch Brush

    Accessories

    TIG Welding Cart
    Auto Darkening Welding Helmet
    Welding Jacket
    Large View Auto Darkening Helmet
    Welding Gloves


    Customers also viewed:

    Customer Reviews

    Items 31 to 40 of 76 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6
    7. ...
    8. 8
    first time tig (Posted on 1/13/13)
    Review by ultimate garage
    Value
    Quality
    Price
    i got the tig 200 and the plasma cutter combo when it was on sale for 1,099 buks. my first weld was on my aluminum jon boat, welded a bracket for rod holders. at first the puddle kept balling up, i increased the amp and bam got the puddle goin. the key is moving the puddle in between the welding parts. the weld looks solid, it dont look like roll of coins but its solid. the previous bad weld spots i just ran over it with the torch only on higher amp...foot pedal to the metal. im hooked on tig welding, welded today till the gas ran out. the weld looks horrible without argon gas. well that was my experience today with the tig 200, notbad for a first timer.
    oh , btw i used a 1/16 lanthanated tungsten and 1/16 4043 filler rod, but i think 3/32 been better filler.
    Great value (Posted on 12/13/12)
    Review by Bruce Kawaguchi
    Quality
    Price
    Value
    I had given up trying to find an affordable TIG. Not only is this model affordable, but it is also able to work on my 110V outlet. It also has a dual plug so it can work on 220 as well as 110. I haven't found anything that I couldn't weld. If you have a decent technique with a gas welder, this unit will make you look like a hero and not put so much heat into your surrounding metal. VERY adjustable and goes up to 1/4" with ease. I put it on a low profile cart because the case is very tall.

    One note, very minor: the gas inlet is VERY LOW on the back of the case. You will have to grind a semi circular relief on the back edge of your cart to clear the hose fittings.
    Very Happy! (Posted on 12/9/12)
    Review by DanaG
    Quality
    Price
    Value
    I reluctantly purchased this TIG welder due to numerous concerns / issues mentioned in the reviews however, Eastwood customer service is top notch. I made the jump and bought the package deal with the plasma. After quickly setting up the TIG, I was welding happily.

    Eastwood - keep up the good work with regards to customer service. It's what sold me and many hobbyists here in the US appreciate a stand up company backing their products!
    Great Reviews.....but.....Not so good experience! (Posted on 11/16/12)
    Review by Randy
    Quality
    Price
    Value
    Really don’t know what to say except the Customer Service was OK….however some calls to Customer Service and e-mails to the tech. support were never returned.
    I purchased the welder because of the good reviews but my experience has not been rewarding.
    Unit No.1 went off like 4th of July fireworks after just 1.5 hrs. getting used to the unit.
    Unit No.2…..the fan would run but would only power up when you giggled the powered cord…
    Tech said they had switched suppliers and were working out the kinks..
    Unit No.3………the fan runs but would not power up…
    They will schedule a pick up for No.3…..No.3 wasn’t the charm and I didn’t want to chance No.4 so I asked for a refund.
    I still have a ¾ tank of gas…..You can’t beat the price but I guess getting a usable unit is just a crap shoot.
    PS. I have gotten really tired of boxing up these units.
    Working GOOD (Posted on 10/27/12)
    Review by owlshop
    Quality
    Price
    Value
    Ordered in mid july . Received it ,then a couple of weeks before I got the tank and cart and plug wired . Set it up and adjusted the Argon flow,shut it off worked fine. Next day setup to weld and powered it on and it shut down and died. I had read all the reviews . Tech support said it would have to be shipped back. Talked with returns person ,she sent a pickup to FEDEX . I packed it up and it was picked up. Received new one the following week,set it up and started welding. I have about an hour on it and plan to play some more this weekend. I t had been several years since I had done any Tig welding. TIG200 is working great. Now to try some small parts/gunparts. YES I would buy it again! Works as good/better than machines at twice the price. OWLSHOP
    Great value, fast reasonable shipping (Posted on 10/27/12)
    Review by Siggy
    Quality
    Price
    Value
    I was schepital buying but I know Eastwood has a good rep so I went for it, glad I did. I bought so I could fab aluminum; I am already making money with this; just finished repairing a cracked head. I ordered on a Wednesday and it was delivered Fedex on Saturday ($59 for this and the Plasma cutter) not bad.
    Great Tig (Posted on 10/13/12)
    Review by capetex
    Quality
    Price
    Value
    I used this tig and it works great. I would tell you buy this tig if you need one. Plus it works on 120volts and also 220 volts.
    Excellent Welder Excellent Price Excellent Service! (Posted on 10/11/12)
    Review by Jim
    Quality
    Price
    Value
    We are a small firearms manufacturer and need a Tig to weld up old holes in Saiga receivers when we are doing conversions and building these guns. We had an old unit that crapped out on us last week and have a large backlog of weapons needing to be welded. It was killing us to think about dropping 3k or more on a new welder and the cheap options out there just didn't have the control we need. Then I found Eastwood. I know the name is quality, the welder had the options we needed, and the price was well within our budget. The only thing that was concerning was the delivery time. We just couldn't wait weeks for it to get here. Well that was not an issue. We placed the order on Thursday morning and the welder was delivered the next Tuesday! We couldn't have expected any faster service!
    The quality of the welds is outstanding, as good as any from a machine costing 1000's more. We would not hesitate to buy from this company again. Thanks for the fantastic service and great product!

    The guys at
    DNS Guns & Suppressors
    St. Petersburg, FL
    Not Dissapointed (Posted on 6/25/12)
    Review by Paul_Thistle
    Price
    Value
    Quality
    I have shopped and shopped for a tig welder. Used and new, I just could not bring myself to part with the 3k and up price. When I saw the TIG200 it seemed to good to be true for the price. But with a money back guaranty, I gave it a try.
    Welding aluminum on motorcycles is why I purchased this welder. After some practice I welded a patch on a silencer and it worked great! It starts easily and is very easy to control. The instructions with the machine are easy to understand.
    I am very satisfied with my purchase. It does everything I expected, and at an awesome price.
    Great welder at a great price! (Posted on 6/22/12)
    Review by Danny
    Price
    Value
    Quality
    Like most, I went out on a limb branching away from the well-known Miller and Lincoln welders (of which I also have) and decided to purchase the Eastwood Tig200. I was even more skeptical after receiving my first welder and quickly returning it due to a fault in the unit (it would immediately trip to overload simply switching it on). However, I would like to point out that the customer service was excellent. I called and without any questions Eastwood immediately shipped a brand new unit which arrived in just a few days. Fast forward over a year later and a number of gas tanks and this thing keeps on flawlessly welding. It is a smooth welding machine with simple controls to quickly get down to welding. I've welding everything from mild steel, tool steel, 4130, stainless and even aluminum with no issues. Definitely a great machine and at a price that's hard to beat!!!

    Items 31 to 40 of 76 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6
    7. ...
    8. 8

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register