Eastwood TIG Welder 200 Amp AC/DC

    Item #12746 Brand: Eastwood

    Quality
    Price
    Value
    76 Review(s)
    Heavy Item - Special shipping charges may apply.

    Details

    Eastwood TIG 200 Welder...industrial TIG features at a DIY price The specially engineered 200-amp Eastwood TIG Welder offers affordable, professional-quality TIG welding on aluminum, stainless or steel (sheet, tube or bar stock), and precise welding of thinner-gauge materials up to 1/4" thick.

    • Operates on either 110vAC, 15-amp circuit or 220vAC, 30-amp circuit
    • 1/4"-thick welding capacity
    • High-frequency start for precise arc control
    • Square-wave inverter for accurate aluminum welding
    • "WP-17"-type torch accepts common cups and collets, up to 1/8" electrodes
    • Duty cycle: 45% at 150 amps
    • Backed by Eastwood's no-hassle return policy and 3-year warranty. Try it out for 30 days and if you don't like it, return it for a full refund!
    Get this TIG 200 Welder PLUS our Plasma Cutter and SAVE BIG! Click here to see our money-saving TIG200 Welder and Versa Cut Plasma Cutter Kit!

    About Eastwood TIG Welder 200 Amp AC/DC

    Eastwood TIG200 200AMP welder features an AC/DC switch that allows both steels and aluminum to be welded with the same machine. With a 14' torch and a 10' ground cable, you'll be able to get into any space with this exceptional welding machine. It has pre- and post-flow adjustment knobs to protect your weld and torch. It even has a foot pedal to control amperage so you can get going quickly, without the need to dial-in the machine for a specific material. Powered through a NEMA50 plug.

    Automatically switches from 110v to 220v depending on input. Infinitely adjustable foot pedal and amperage control allow accurate aluminum welding, and adjustable pre- and post-gas flow results in proper arc starting, stabilization and bead cool-down. Thumb control overrides the foot pedal for out-of-position welding, or when bench welding is not an option. This exceptional Eastwood TIG Welder is backed by Eastwood's no-hassle 3-year warranty. Try it for 30 days, and if you're not satisfied, simply return it.


    Contents

    TIG200 Unit
    Shielding Gas Regulator
    Shielding Gas Hose
    Ground Cable with Clamp, 10'
    TIG Torch (17 Series), 14'
    Foot Pedal for Amperage Control
    110v-to-200v Adapter Plug
    Instruction Manual
    Handheld Shield
    Hammer/Brush
    #7 Cup (7/16"), #6 Cup (3/8"), #5 Cup (5/16")
    Long Back Cap, Short Back Cap
    3/32" Collet Body, 3/32" Collet, 1/16" Collet, 2.0mm Collet
    Thoriated Tungsten (2.0mm Red)


    Specs

    Input Voltage: Single-Phase 110vAC or 220vAC (±15%) @ 50-60Hz
    Input Amperage: 28 amps
    Output Amperage: 10-200 amps AC/DC
    No-Load Voltage: 51
    AC Duty Cycle (%): 20-80 (80% at 100 amps, 20% at 200 amps)
    Post Gas Flow: 2-8 sec.
    Pre Gas Flow: 0.1-1.0 sec.
    Remote Foot Pedal And Control: Yes
    Efficiency: 80%
    Cleaning/clearance effect (AC balance control) is adjustable to provide wider cleaning with shallow penetration to narrow cleaning with deeper penetration. Changing electrode from EN (electrode negative) to EP (electrode positive).

    Frequency is fixed at 60Hz, which provides a little wider bead but with good penetration for aluminum and magnesium.

    Inverter and MOSFET technology offer optimum performance at a very affordable price.


    Safety

    Always wear an approved welding helmet and welding gloves. Do not use around flammable materials. Do not open machine; there are no user-serviceable parts inside.


    Warranty

    Click here for warranty


    Instructions

    Click here for instructions


    Accessories & Consumables

    Consumables

    1/6 Inch Collet Body
    3/32 Inch Collet Body
    TIG Torch Rear Back Cap
    3/8 Inch Diameter Ceramic Nozzle for TIG-200
    7/16 Inch Diameter Ceramic Nozzle for TIG-200
    1/16 Inch Diameter Torch Collet for TIG-200
    3/32 Inch Diameter Torch Collet for TIG-200
    1/16 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
    3/32 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
    1/16 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
    3/32 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
    1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
    1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
    3/32 Inch Diameter 2 Piece Green Tungsten for Steel
    1/16 Inch Diameter 2 Piece Red Tungsten for Steel
    3/32 Inch Diameter 2 Piece Red Tungsten for Steel
    2 Pack Stainless Steel Scratch Brush

    Accessories

    TIG Welding Cart
    Auto Darkening Welding Helmet
    Welding Jacket
    Large View Auto Darkening Helmet
    Welding Gloves


    Customers also viewed:

    Customer Reviews

    Items 41 to 50 of 76 total

    per page
    1. 1
    2. ...
    3. 3
    4. 4
    5. 5
    6. 6
    7. 7
    8. 8
    Really not bad! (Posted on 6/20/12)
    Review by Wino
    Price
    Value
    Quality
    I've had this welder for 2 months now, i made some really nice welds on steel, alum. and stainless (down to 24 gauge). The performance is there. quality, so far so good. If eastwood will back it up, then i'd have no problem buying this product again. Don't expect a welder your going to run all day, every day. It's just not that kind of machine.
    Eastwood stands behind their tig welder (Posted on 5/29/12)
    Review by Thomas
    Quality
    Price
    Value
    as well as purchasing eastwoods plasma cutter i bought in the combo package they are offering with a cart it is money well spent. i read its reviews and researched this item. what i came up with was either it works out of the box or it doesn't. i was bummed out when i got mine and the torch hose had a collapsed section and kinked everytime u moved the torch and the wires for the foot petal were melted and i havent even used it yet. i called eastwood and told them their was a problem with the attachments and they rushed me out new parts asap no questions asked. no hassle. once i got my parts i hooked up a argon tank and bought a tube of rod and away i went. as a mig and stick welder and never tig'ed before its a breeze to use. i own a body shop and i use the plasma cutter and tig welder almost everyday. never fails. amazing for welding patch panels especially thin body panels. havent tried thick metal or aluminum but i can only imagine how good this thing works.
    I stick welded for an hour ten years ago. That was easy, and tig can be just as easy. (Posted on 5/26/12)
    Review by mp112212
    Quality
    Price
    Value
    Got my tig. Followed "instructions", Hooked up a bottle of argon. Put two pieces of 0.25 in thick carbon steel together and went at it. 120v and 180 amps stuck them together enough that a 20# sledge swingig as hard as i could would not bust the weld. No filler rod used either. will have to update you when i break it hydraulically. No problems with trigger or foot start. Can't wait till i run it on 220v. Gas flow seemed consitent. Not too shabby for a total novice when it come to inert gas welding. For a do it yourselfer, in the home garage. It does its job so far. I will post again when i try some aluminum, ss, maybe a little hasteloy, and some more exotic metal...I will say that most problems people complain about this tig can be fixed no problem by anyone with just a little bit of mechanical skills and common sense.
    Awesome Tig Welder (Posted on 4/2/12)
    Review by jjhdtec
    Quality
    Price
    Value
    I got to say this Tig welder is Awesome! I have been only tig welding for about 6 classes so far. We use the Miller 350 at school, Nice unit. But I can do just as well with the Tig 200. My instructor was impressed with my work I bring from home. He can't believe it was only $899. Just about every night I spend an hour welding scrap together. I found out one of the most important thing is to be able to see the start of the puddle. I have pretty good eyes. I put a 2.50 magnifier in my helment and it was amazing how much better I started to weld. Tri it !!
    awsome tig (Posted on 2/1/12)
    Review by John
    Price
    Value
    Quality
    I purchased this tig after lots of research, bought it and recieved it in 2 days. Ive never tig welded before, but have expierince with mig and stick, got it hooked up and was welding aluminium like a pro in 10 minutes, I would definrtly recommend this welder to anyone.
    Excellent (Posted on 2/1/12)
    Review by Chuck
    Price
    Value
    Quality
    I bought this welder about a year ago and absolutley love it! Excellent on sheet metal and 3/16" plate as I've only ran it on the 110v plug. Great control with aluminum using the foot pedal. I weld tube cages, off road accesories and parts as well as fabricate custom rods and choppers and metal fabrication in general.
    For the price, you can't beat it. Aside from having a 3 yr. warranty, the welder is less expensive than it's Miller and Lincoln counterparts, and it works just as good if not better. If you make the purchase, you won't be disappointed
    Amazing TIG Welder at a great price! (Posted on 1/27/12)
    Review by Yong
    Quality
    Price
    Value
    I purchased this TIG welder in August but didn't get a chance to use it until November. When I first used it, I got a "Overload" light right when I pressed the foot pedal, which turned out to be a bad unit. There was some rattling noise inside (sounded like a loose screw). First, I must say, Eastwood's customer service is excellent! When I called customer service, they transferred me over to a technician to diagnose the problem. The tech was not there but I left a number and they called back and the tech said that it was part of a bad batch and they would exchange it for another one. So taking the chance and knowing that I cannot get another TIG welder at this price, I left the unit in a box and FedEX came to pick it up. The customer service e-mailed me and even mailed me to notify of the status. A month later (after a backorder), the new unit arrived. I plugged it in and voila, it works great! I still need more practice, but this unit does the job! This is the best bang for the buck TIG welder out there!
    initial welding with tig 200 (Posted on 1/26/12)
    Review by docfish9155@gmail.com
    Quality
    Price
    Value
    "well folks ive been welding for 34 yrs. and previously had an esab161, i got my eastwood tig 200 a few days ago and was able to play with it today for the first time, the mother board went out on the esab and cost 1200.00 just for the mother board, so i got the eastwood tig 200 my first use of it was on 1/8 in. wall aluminum pipe worked great so i welded 3/16 aliminum plate at a 45 again the machine did everthing i asked it to do, i am a cert. welder for carbon,ss,and aluminum, im here to tell u im very impressed with this welder so far thank you eastwood for a great little welder"
    EASY TO AND GOOD CUSTOMER SERVICE (Posted on 1/17/12)
    Review by STACKS
    Quality
    Price
    Value
    I NEVER THOUGHT I COULD JUSTIFY THE PURCHASE OF A TIG WELDER UNTIL THIS UNIT CAME ALONG. WHEN I FIRST SET UP THE UNIT I HAD NO GAS FLOW FROM THE TORCH, I CALLED EASTWOOD ,DESCRIBED THE PROBLEM AND THEY HAD A COMPLETE NEW TORCH TO ME IN A COUPLE OF DAYS. THATS CUSTOMER SERVICE. I'VE BEEN USEING THE MACHINE FOR ABOUT EIGHT MONTHS WITH NO PROBLEMS. IT DOESN'T HAVE ALL THE BELLS AND WHISTLES OF BIG BLUE BUT ITS A GREAT MACHINE FOR THE MONEY. I JUST WISH I WOULD HAVE HELD OFF UNTIL THE SALE OF THE WELDER AND PLASMA CUTTER.
    Good for what ales you (Posted on 1/1/12)
    Review by Jonny C.
    Quality
    Price
    Value
    I weld for a living but I dont have a ton of money to put into a tig machine. I think with this machine I will be able to make more money on the part time side. It keeps up with out a problem to any torch I've ever used before. At 45% D/C at 150 amps wich by the way I dont use until I get to 9/16" thick steel and "Joey Home Owner" will never use at this level of welding, its perfect for the week end welder/body guy. Perfect price, perfect size, perfect strenth. good job Eastwood, I'll be looking at buying more from you in the future.

    Items 41 to 50 of 76 total

    per page
    1. 1
    2. ...
    3. 3
    4. 4
    5. 5
    6. 6
    7. 7
    8. 8

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register