POR-15 Black Rust Paint Quart

    Item #13585ZP

    Price
    Value
    Quality
    9 Review(s)

    Details

    POR-15® is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. Use it to coat rusty frames, floor pans, farm equipment, marine equipment, or even a heavily corroded battery tray. POR-15® is sensitive to UV light (sun) and must be top coated for prolonged exposure to sunlight. Top coating is not required for areas not exposed to sunlight.

    About POR-15 Black Rust Paint Quart

    POR-15® is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. Use it to coat rusty frames, floor pans, farm equipment, marine equipment, or even a heavily corroded battery tray. POR-15® is sensitive to UV light (sun) and must be topcoated for prolonged exposure to sunlight. Topcoating is not required for areas not exposed to sunlight.


    Contents

    32 FL OZ


    Accessories

    POR-15 Metal Ready POR-15 Marine Clean respirator Gloves Eastwood Rust Encapsulator Eastwood Rust Converter Eastwood Chassis Black Eastwood Underhood Black


    Application

    One quart covers about 96 square feet at one coat Step 1- Degrease with Eastwood's PRE or POR-15 Marine Clean Step 2- Neutralize and etch the surface with Fast Etch or Metal Ready Step 3- Coat surface with POR 15, allow to cure Step 4 Topcoat with any one of the many Eastwood Paints and coatings


    Safety

    always wear eye, skin and respiratory protection always use in a well ventilated area away from an open flame consult MSDS for specific safety warnings


    Warranty

    MADE IN THE USA NSN # NONE


    Application

    One quart covers about 96 square feet at one coat Step 1- Degrease with Eastwood's PRE or POR-15 Marine Clean Step 2- Neutralize and etch the surface with Fast Etch or Metal Ready Step 3- Coat surface with POR 15, allow to cure Step 4 Topcoat with any one of the many Eastwood Paints and coatings


    Customers also viewed:

    Customer Reviews

    9 Item(s)

    per page
    TRICKY STUFF (Posted on 8/11/13)
    Review by SKEET
    Quality
    Price
    Value
    THIS STUFF IS TRICKY TO USE , my BROTHER WORKS IN A AUTO BODY ENVIROMENT FOR 20 YRS OR BETTER ,hE STILL HAS TROUBLE FINDING OUT HOW THIS STUFF REALLY WORKS .. yOU CANT PUT IT ON BARE METAL UNLESS THERES RUST ON IT .iT WONT STICK WELL ON OTHER PAINTS .IT WONT STICK IF YOU WIPE THE SURFACE DOWN WITH PREPSOL.. yOPU NEED TO KEEP THE LID GAP CLEAN AND YOU NEED TO PUT A TIGHT SILCON TYPE GLOVE OVER THE ENCLOSED CONTAINER TO KEEP THE MOISTURE AWAY FROM IT OR IF THERES ANY PAINT RESIDUE ON THE LID YOUR GONNA HAVE TO JACKHAMMER THE LID OFF ..YOU ALSO NEED TO WATCH THAT YOU PUT IT OVER THE CORRECT PRIMERS AND SEAMSEALERS TO .OR IT WILL TAKE DAYS TO DRY .SO THIS IS WHAT HE TELLS ME ABOUT HOW TRICKY THIS STUFF IS .
    Great product, long lasting results (Posted on 2/14/13)
    Review by Phantomracer
    Price
    Value
    Quality
    Been using POR15 for over 10 years now on various projects. The first project looks as good today, as when I first applied it (exterior of a fuel tank).

    PREP and application is key! Also, this is NOT a paint, it is a paint like product. It does NOT dry by evaporation like paint does. it cures with moisture. It may take over a day to dry in arid conditions, or pretty quickly in a humid environment.

    IF you use their marine clean, and metal etch, clean properly, the results will be great, and permanent.

    The only failures I have had when I DID NOT prepare the area properly. My fault.

    As mentioned, it is NOT a topcoat, it is a PAINT OVER RUST product. great for undercarriage, inner body panels, even fills holes!
    Awesome Product (Posted on 7/25/12)
    Review by WHIT
    Price
    Value
    Quality
    Followed instructions and the trailer turned out awesome! I'm buying the spray Por-15 for the inside of the frame. Good stuff but don't let brush splatters hit ya in the face, it don't come off....LOL
    Not what it once was (Posted on 6/26/12)
    Review by stanger
    Price
    Value
    Quality
    I was a loyal POR user, but recently was very disappointed in the flow, finish and coverage. I thought it was maybe just a bad batch. I tried again on a new project...same disappointing results. I tried Encapsulator and got a nasty finish. I have friends which highly recommend KBS rustseal. That will be my next purchase.
    POR-15 Great Product (Posted on 4/7/12)
    Review by Dennis
    Price
    Value
    Quality
    The more I use POR-15 the more I like it. I use it on trailer frames from tongues to bumpers. It works great on wood. I use it to seal marine plywood edges and any holes. This is the most self leveling/thin paint I have used. A small amount goes a long way. Wear Protection. Get disposable gloves and long sleeve shirt. If you get this stuff on you or almost anything else and don't get it off immediately, you will have to wear it for a week or so. It bonds to your skin like no other product I have ever used. This is not like any other paint. You must read and follow the directions completely. Great stuff.
    Awsome product (Posted on 3/29/12)
    Review by Mark
    Quality
    Price
    Value
    Used for a 1965 mustang rebuild worked good on bare repair panels and rusted ares. If this product did not work for someone it was appied wrong surface prep is important,,must use marine clean to degrease and clean area to be painted.Also have used to repaint tandem dump trailer that gets USED. Finish is rock hard and stays,does not scratch and chip like other products I have tried
    Good Product (Posted on 3/8/12)
    Review by Mickey
    Price
    Value
    Quality
    I have used this product several times.. I feel it works very well.. The last project was on my 2005 F-150 underside where one piece of metal was attached to another,, some rust was forming at these seams.. I brushed it into these areas and the product overlapped onto a factory painted surface and it is still holding very well..
    I have used it on rusty surfaces and some bare metal areas on the same projects and noticed the bare metal area would maybe not cover totally on the first coat.. After a day to dry I would coat again with a second coat and it looked very good and seems to hold up to the harsh elements of the road spray (underside of two car trailers)...... Yes it does dry a little slow,, but overnight and it's ready to use or recoat..... Overall I still like the product,, POR-15..........
    Good Product (Posted on 1/23/12)
    Review by Sparg
    Quality
    Price
    Value
    As Steve indicated, he did not use the product correctly. Please read the directions, POR is not designed to adhere to bare metal.

    I used POR on my rusty underbody and it adhered perfectly and is hard as a rock.

    If you're working on a resto project where it needs to be perfect, POR is not your product. This is for vehicles that have some rust and you want to seal it up to protect it from the environment and further corrosion.
    Warning (Posted on 1/22/12)
    Review by Steve
    Quality
    Price
    Value
    Cleaned 1957 Chevy Nomad to bare steel and painted on. Got streaks, bubbles and still hasn't dried after one day. Would use this product on something covered with rust trying to flip real quick. My problem will be removing this from my current project. My regret is not trying the recommended test spot. This product is like tar and I don't recommend for a real restoration project.

    9 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register